Search results

  1. Boostedpimp

    Some things did not age will on the Foxbody Mustang.

    I have oem r wheels on a car but since they are so played out around here with the knock offs these don't do anything for me. Only reason they are still installed is because they are so clean and I really don't feel like searching and buying another set of wheel.
  2. Boostedpimp

    Some things did not age will on the Foxbody Mustang.

    The four lug cobras and cobra inserts always gave me the cheap feeling when seeing them on peoples cars.. Then again i'm picky, I'm one of those people who can't stand cobra emblems on a non cobra
  3. Boostedpimp

    Post pics of how your foxbody currently sits

    If you really want to tighten up the feel of the car get a set of subframe connectors welded in.. even the short cheap style makes a huge difference.
  4. Boostedpimp

    Long Tubes Worth it for my build?

    I really liked longtubes on one of my previoius tfs top end cars but always had starter heat soak issues and one set hung a good bit lower than the other set. That made ground clearance very sketchy because it wasn't a track only car but overall I'd run them again if I was as lazy as I am now...
  5. Boostedpimp

    Rusty clutch

    i'd run it
  6. Boostedpimp

    Rusty clutch

    Whats rusty the clutch disc? How bad
  7. Boostedpimp

    Are people just crazy??

    Values are only going up but people with crusty chitboxes think they have gold.
  8. Boostedpimp

    Best quality/price H/Ccombo?

    Ed Curtis is the man https://flowtechinduction.com/
  9. Boostedpimp

    Engine No start crank easy starts on starting fluid or gas in intake

    If the pump is running continuously with key on to prime then I would pull your ecm and check for leaking caps
  10. Boostedpimp

    Build Thread Mustang5L5's Build Thread -

    LMR offers a heater tube that doesn't have that coolant port for the egr if you didn't want to deal with blazing it over but it also looks like you maybe keeping it since your actually using it in the pictures :)...
  11. Boostedpimp

    Help with new purchase , 93 vert

    Looks normal, it a oem bracket only found on convertibles that is suppose to add more rigidity to the chassis
  12. Boostedpimp

    90 LX Front wheel offset…

    The problem is either the A arms or the spindles. Also the k member a arm mounting points aren't the same across the board so that maybe contributing to the issue as well. I personally would swap out the spindles to 94/95 spindles and see where your at there. It's the cheapest and easist part...
  13. Boostedpimp

    Post pics of how your foxbody currently sits

    My eyes hurt, did you use the camera from your Nokia phone? :)
  14. Boostedpimp

    Oil choice

    FJB
  15. Boostedpimp

    Build Thread Mustang5L5's Build Thread -

    The Derale PWM controllers are actually DCC controllers that were widely used and loved years ago.. They partnered with Brian Baskin a few years back so they would be a solid choice
  16. Boostedpimp

    Steering wheel install

    I agree completely
  17. Boostedpimp

    Progress Thread Therapy Car-- Freshening Up the Lower Intake

    If it doesn't have an EGR then it doesn't need the spacer between the intake and throttle body. Some people have issues with the throttle linkage so they still run the egr spacer with a block off plate but if it's been working good without the spacer just leave it
  18. Boostedpimp

    Steering wheel install

    Please post pictures of the piece and install when you get it
  19. Boostedpimp

    Engine New to Mustangs, guidance needed on fault codes 47 & 45

    If I was you, I would treat your daughter to something good because she saved you a ton of head scratching and stress.. Jingle each individual wire in that harness to the ecm until you find the culprit if you can't visually see the problem easily
  20. Boostedpimp

    Progress Thread Cars alive again, but would these items move on marketplace?

    yeah sounds like whoever did the valve covers did not account for the power pipe etc, You can buy some rubber grommets for the two wholes with the breathers and pop an fittings in, run the lines to a catch can and block off the pcv valve spot and be good other than the whole fill tube deal...
Top Bottom
Back
Forums
Menu