Search results

  1. NCStang86

    Who's got what short shifter?

    I think the part# for the 85-86 is 3915070 or 3915072. This one is 3915071. Hurst says this one will fit all T-5s and T-45s. It comes w/ a shim plate for a T-45.It does have a staight long chrome handle.check out this link http://mustang50magazine.com/howto/138_0408_shifter_install/
  2. NCStang86

    Who's got what short shifter?

    I have the new SST billet plus part#3915071. They did a write up on it in the 5.0 mag a few months ago. I had no problems w/ fitment. I already had the console plate and boot from a old competition plus so I used it.The 3915071 is much better than the 3915030 it comes w/ chrome stick and shifter...
  3. NCStang86

    Who's got what short shifter?

    I've got the new hurst super short throw shifter. I had a pro 5.0 in the past and the throw on the hurst is as short if not shorter than the pro 5.0. Very nice shifter
  4. NCStang86

    17x8/17x9?What size is right and what size of tires would be best with no rubbing??

    I run 17x9s all the way around w/ 245/45 in front and 275/40 in the back w/ no problems at all
  5. NCStang86

    Adapter for SN95 soft brake lines to Fox hard brake lines ??

    These are for the rear
  6. NCStang86

    Adapter for SN95 soft brake lines to Fox hard brake lines ??

    I bought mine from baker precision. I don't know the exact website name. I just went to google and did a search on brake line adapters.Thats how I found it.U need a 7/16 male to 3/8 female inverted flare. They're only a few bucks a peice.
  7. NCStang86

    Competition: Who has the nicest 86'? Me first.

    Here's my 86 GT. Look at the pics in my garage
  8. NCStang86

    air flow adjuster

    I use one and it works like a charm.I had a pretty rough idle and it fixed that. Places like texas mustang and mustangs unlimited sell them for like $149. I bought mine off ebay for $50 bucks. There's one on there now that goes off today I think. the bid is only like $20 bucks.
  9. NCStang86

    17by9 rims fit on fox body without mods??

    I have 17x9s on my 86 GT all the way around w/ 245/45s in front and 275/40s in the back. I don't have any problems w/ rubbing or steering
  10. NCStang86

    Need immediate help on fuel pump size! Please!

    Thats what kind I got
  11. NCStang86

    Need immediate help on fuel pump size! Please!

    Go ahead and get a 255lph. they cost about the same as a 155 or 190.That you'll know the fuel is getting there.
  12. NCStang86

    Pressure plate forks compress when plate is tightened to flywell ?? WTF! HELP!!

    Check to see if the clutch disc was installed backwards and make sure the pressure is lined up w/ the dowels on the flywheel.It is possible to overtighten the pressure plate. I was helping a friend put a centerforce clutch in his mustang and had the same problem and later figured out we...
  13. NCStang86

    People with Longtubes...

    I'm running BBK longtubes and I've never gotten any codes like that.
  14. NCStang86

    main girdles that clear stock pan

    I'm using the Trick Flow girdle w/ my stock pan. I paid like $199 for it from summit.
  15. NCStang86

    just had the 3.73's installed!!

    A good exhaust system is a good place to go next.That'll free up some good power. Theres nothing better than a good sounding stang!!
  16. NCStang86

    Aluminum Drive Shaft question

    Its some of the best money I ever spent on my stang. Its well worth the money. U won't be disappointed. U won't beleive the decrease in driveline vibration.Go ahead and get it.
  17. NCStang86

    Keeping 4 lug but adding rear disk brakes

    I Stayed w/ 4 lug and used the turbocoupe brakes.It don't really stop alot better, but it sure does look alot better
  18. NCStang86

    O2 sensors and longtubes questions

    It was probably time to change them anyway. I've been running BBK longtubes for 7 or 8 yrs now and I've never had any problem w/ my O2 sensors. They recommend u change them every 60,000 miles or so. I just bought some new ones for mine off ebay. I paid $2 for one and $20 for the other. They...
  19. NCStang86

    Cobra rear brakes on Fox body

    There should be a little bracket welded on there already from the factory. Its near the shock mount. Just drill a little hole in it and use a self tapping screw or bolt and mount the hose to it. Thats what I did.
  20. NCStang86

    Plugs for Edelbrock Heads?

    I use motorcraft AGSF32C plugs in my edelbrock heads. I think it is about the same as a autolite 24. My car runs better w/ a little colder heat range plug.U still got to use the bushings cause these heads also fit a 351 and it uses 1/2in head bolts
Top Bottom
Back
Forums
Menu