Search results

  1. 6

    I assume coolant in spark plug well is bad?

    Check the plumbing running to your intake. I had a hose clamp back there tear a small hole into a rubber hose which was streaming coolant into the #4 plug well.
  2. 6

    KuZtOm PaInT bEeOtCh

    My car was egged one night. I came out to go to class and noticed the spoiler split the egg, which then slid up my rear window, across the roof and down the front windshield. came off easily with a little bit of dish soap and warm water. Only left 3-5 pin hole sized marks on the trailing edge...
  3. 6

    4.6L ford racing parts intake and exhaust question

    Where else are you going to get a stainless 2.5" catback for 250 bucks? You could buy the after market mufflers, weld them in, and still be ahead of the game on most catbacks.
  4. 6

    Air smells from vents

    Turn on the A/C and spray Lysol around the cowl area as it runs.
  5. 6

    Suspension/Brake Issues...

    I've got a few problems I can't quite track down and it is annoying as all hell! 1. Under moderate to heavy braking, and now seems to be creeping up in light braking, I get anywhere from 1 to 3 popping/clunking sounds from the front left of the car. This typically occurs when there is nose...
  6. 6

    Dynomax vs. Flows - Flows can't win.

    It was your locking gas cap that made all the difference.
  7. 6

    How much do dealers try to rip you off? This much....

    Fords hourly labor charges are based off the mean income of your area. My area is $50/hr labor charge. The Ford my friend works at is $60/hr labor charge. I had my friend at the $60/hr dealer rebuild my rear and install a new ring and pinion for $180 bucks. Looks like your independent...
  8. 6

    6 quarts????

    Wasn't there a TSB a few years back on oil levels and mis-marked dipsticks?
  9. 6

    ~ $1,400.00 To Put In 4:10's?... <Swallows Hard>

    Chunky please! :rlaugh:
  10. 6

    ~ $1,400.00 To Put In 4:10's?... <Swallows Hard>

    Yes, please. What kind do you have? :D
  11. 6

    ~ $1,400.00 To Put In 4:10's?... <Swallows Hard>

    I'm paying 200 at Ford for ring and pinion install, and replacement of pinion and carrier bearings. :D Oh yeah, parts included :D.
  12. 6

    BBK O/R X Pipe Owners - STEP INSIDE!

    BBK o/r X with FRPP short tubes and stock catback. Always get complimented on it, and get people asking me what mufflers I have.
  13. 6

    COMPLETE Tune-Up/Service - I NEED YOUR HELP!!

    Might also want to check the ball joints, inner/outter tie rods, get an alignment, and check the u-joints.
  14. 6

    borla cat-back 99up gt

    No, thats the Pro XS.
  15. 6

    HIGH OIL PRESSURE....

    4.6s take 6 quarts.
  16. 6

    Make me smoke LS1s

    Yeah, because all LS1s are stock ;).
  17. 6

    Is a 2" drop too much???

    Even if you don't go with long tubes and lower 1.5" you'll still scrape on some speedbumps and obstacles. You will just have to learn new routes, or take your time over certain speedbumps (you'll learn which ones very quickly) and hope those behind you are patient and understanding.
  18. 6

    pi headswap guys, whats your mileage?

    I think I had close to 90K at the time of the swap. Now I'm getting up close to 130,000 with NO tune and can manage 310+ miles on a tank.
  19. 6

    Supra Aerotop On Mustang?!

    Wouldn't that be a TARGA top?
  20. 6

    I LOVE my new gas mileage

    I've hit 340.
Top Bottom
Back
Forums
Menu