Search results

  1. MisterCMK

    96 gauge cluster in my 95gt

    Saved and rehosted. Thanks.
  2. MisterCMK

    Back to back fox versus 94-95 TB dyno results inside!!!

    I would be interested to see how much air was moving through there with the Fox vs the SN95 TB in addition to the dyno numbers. It is nice to finally see someone put down some actual numbers though.
  3. MisterCMK

    Thumper Performance E7 Heads : Who has them and how is the performance?

    I picked up a set of used Thumpers from a local guy for $300 and that came with a couple of other parts. I've been happy with them so far.
  4. MisterCMK

    Post Your Newest Stang Pic, 94-95 Cars Only.

  5. MisterCMK

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Yup, it sure is. :D
  6. MisterCMK

    Post Your Newest Stang Pic, 94-95 Cars Only.

  7. MisterCMK

    Post Your Newest Stang Pic, 94-95 Cars Only.

    Just a few pics of my head swap for now Beginning Middle End
  8. MisterCMK

    distributor issue

    It probably sees you moving the distributor as the engine starting
  9. MisterCMK

    My weekend project - 2000 GT 5.4L swap

    awesome
  10. MisterCMK

    How rare was the red interior in the 94-95 cars

    What is the black thing on the left of the picture?
  11. MisterCMK

    Distributors

    Just bought a reman from O'Reilys myself due to a bushing that died in mine at 157,000 miles. The damn thing died on me this morning on the interstate with 15 miles on the new one. PIP sensor went out. I had to get a ride back home and get my buddy and my truck to tow my car off the...
  12. MisterCMK

    help tracking down voltage drop @ idle

    The wire size depends on the current load as well as the distance. A #8 would be fine if you are only going a couple of inches where as you wouldn't want to use it to go from the front to the back of the car. (Just an example)
  13. MisterCMK

    Group Purchase: Mishimoto Radiators

    Mine came thursday and I put it in last night along with a new battery and HID kit. The fitment is good, it is considerably thicker than the stock one. It is a bit of a pain to get past the A/C lines, but no biggie
  14. MisterCMK

    Squeeky TOB

    A pilot bearing is going to complain whenever the clutch is all the way in. What the OP is describing is a noise that is there with the clutch out and it goes away when he puts pressure on the pedal. Classic TOB noise. The FWA and quadrant will take care of it.
  15. MisterCMK

    Squeeky TOB

    You only use 1 hook of the triple hook. I have heard good things about the quick release. I went with the Fiore quadrant and FWA from 50resto.com
  16. MisterCMK

    Squeeky TOB

    Get an aftermarket quadrant of your choice and a firewall adjuster of your choice and that will take care of the noise.
  17. MisterCMK

    Group Purchase: Mishimoto Radiators

    I sent an e-mail to them. I'll post up if I hear anything from them.
  18. MisterCMK

    Group Purchase: Mishimoto Radiators

    Any status on these?
  19. MisterCMK

    ****!!!!! Intake install gone awry. Please Help!?! =*PICS*=

    I think that everyone breaks that bolt off. I broke the front drivers side when I did mine. My dad and I drilled it out and just chased the threads. My friend broke off the front passenger side on his Fox when he did his cam swap. He biffed it when he started drilling it and ended up having...
  20. MisterCMK

    wheel spacers

    I have 1" wheel spacers and they work just fine with my Bullitts. I have to take the spacers off to put on the 16" wheels w/ drag radials as there is not enough of a hole on the wheel for the factory studs to sit in.
Top Bottom
Back
Forums
Menu