Search results

  1. 12sec67

    Long wheel studs/ Draglite/ Torq Thrust?

    I had to go with the long 3" studs then upgrade to the Gorilla splined lug nuts and then just cut the cap off the end. Its the only way I could get the lugs to the wheel without finding a long A socket and it clears the rim with no problems.
  2. 12sec67

    Classic Mustang Work in San Diego

    I'm here... Been around stangnet for a while, 10secgoal and I have a shop in Santee. we ended up doing my roll bar and his not to long ago. And we built Iskwzem's turbo kit. If you want to check out our website here it is. http://www.cprstreetmachines.com/ Your more than welcome to...
  3. 12sec67

    Stang-Aholics 4-link rear suspension

    LOL, that is the same one as Hiedts but theres is painted yellow. :lol: Maybe there partner is Hiedts. We (CPRstreetmachines) installed one not to long ago into a customers car. If your going to get one make sure you do the upgrade to adjustable coil overs otherwise its a really loose...
  4. 12sec67

    how wicked is your cam?

    mine came out to 62 :rlaugh: with the ford racing X-303 cam
  5. 12sec67

    94/95 parts for 66 coupe

    The CPP kit has upper control arms so if you want to put in your turbo headers for 302 from the 94 then you need to go with something that you can notch the towers.
  6. 12sec67

    strength of the early 302 blocks compared to the 5.0 roller blocks

    I won't lie, its not for wussies....being WOT on a 500hp+ stock block is scary :hide: you know how it is Iskwezm:rlaugh: I really don't want an aftermarket block because I know once I do- its going from 9psi to 15-20psi and I don't think i'll ever be ready for that.
  7. 12sec67

    AJEracing install in 67 mustang

    Yea it does thanks to you!:D what do you want to do about the springs...?
  8. 12sec67

    Seriously Considering the Griggs Gr350

    we installed a torque arm on a 96 cobra and it made a such a HUGE increase in handling, that we've been contemplating doing one on our shop car (67 fb ) :nice: I like the fact that it has a K-member design with adjustable coil overs, very similar to what I have. It saves the weight and helps...
  9. 12sec67

    AJEracing install in 67 mustang

    here are some completed pictures, still need to take some more suspension pictures.
  10. 12sec67

    AJEracing install in 67 mustang

    new caster plates installed installing the strut and installing the screw in clamp and coil springs installing the pinto rack along with the clamp for the rack from aje Since I went with the SN95 spindle assembly I put on the hub from a set of Cobra calipers and slot/ drilled rotors if...
  11. 12sec67

    AJEracing install in 67 mustang

    well we finished up everything in time for the Knotts show with an overnight stay at the shop. Ended up leaving Sunday morning about 6:45am to head up and on the way up I could smell oil burning. Pulled over to check it out and found that my turbo seal is leaking and was gushing oil all over my...
  12. 12sec67

    1st test drive with the new turbo

    it came out really nice:nice: I remember my first time.... it felt so good.:D
  13. 12sec67

    AJEracing install in 67 mustang

    10secgoal stated that we did weigh all the old parts last night and it came to 155lbs with all the suspension and everything else I cut off minus the brakes.:nice: and the new K-member weighs a heafty 19lbs:D progress pics...... Remove the stock crossmember and bolt up the k-member to the...
  14. 12sec67

    AJEracing install in 67 mustang

    cool:nice: here are some more pics the stock upper spring plate holder needs to be removed for the new caster camber plates to able to be installed using 14 g. sheet of material, made a template and cut out part of the plate using a plasma torch to overlay the tower...
  15. 12sec67

    65 Fastback 4.6 DOHC Turbo Progress Pics

    you suck!:D that is exactly what we (10secgoal) and I were going to do with our 67 fastback that we bought for our company project car. We were also going to stay carb'd as well:nice: very nice build:flag:
  16. 12sec67

    AJEracing install in 67 mustang

    We ended up doing a kit on a 66 coupe with the P.S. rack from a 90's mustang and it handled really well without a sway bar with 175 coil over springs. The good thing about this kit is that you can put your upgraded sway bar on to this kit if needed and they will give it to with what ever spring...
  17. 12sec67

    AJEracing install in 67 mustang

    yes I am:D
  18. 12sec67

    AJEracing install in 67 mustang

    Yeh, I have some late nights ahead.
  19. 12sec67

    AJEracing install in 67 mustang

    sorry, the suspension was on it last leg so it will be going into the scrap bin and I had the brakes sold before I took them off. one last look before I start cutting it up I ended up using a sawz-all and plasma cutter to get most of it out, I still need to fine trim up everything use the...
  20. 12sec67

    AJEracing install in 67 mustang

    good thing you polished my inlet tube for me...:D Your money is no good here :cheers:
Top Bottom
Back
Forums
Menu