Search results

  1. scarless

    uh oh, egr tube snapped

    I knew a guy that just used copper tubing, 1/2" I think, and flaired the ends.
  2. scarless

    Need a measurement from a Vert

    If you get poly isolators they will make it higher than the stock ones.
  3. scarless

    Brake Caliper Bolts

    If you have stock brakes then AutoZone and Advance Autoparts does carry the parts. Ask for a brake hardware kit.
  4. scarless

    Valve guides worn?

    Guys, read and learn. http://www.hastingsmfg.com/Service%20Tips/valve_guide_knurling.htm http://www.aa1car.com/library/ar696.htm
  5. scarless

    Valve guides worn?

    They put chris-cross groves in the guide to reduce the diameter. It stops the oil bleeding and some say it's better than new because it reduces valve ware and friction.
  6. scarless

    Valve guides worn?

    Just have them knurled.
  7. scarless

    cobra brake upgrade

    Going to a Cobra MC will make the peddle softer. A problem with the GT MC is that it's larger than the Cobra and the peddle can feel rock hard. Power bleed the system before you do any swaps.
  8. scarless

    Need a new shortblock

    Do a compression test. You may have bent a valve.
  9. scarless

    Cobra Brakes, Front/Rear, Bench Bleed...good times

    If you ran the MC dry, you most likely got air in the ABS block. You'll need to power bleed it to get the air out of the ABS. Dealers just love to do this. :(
  10. scarless

    Lugnuts Falling Off

    Do you have grease or anti-seize on the threads? If so, clean them off.
  11. scarless

    Stick or Auto

    The conversion costs about as much as getting a new Lentech trans. You need the trans, shifter, clutch, linkage, flywheel, peddle, drive shaft, EEC computer. These guys sell a kit. Note that for $1900 the only NEW parts in the kit are the clutch and the pilot bearing...
  12. scarless

    Product that gets rid of scratches on windshield???

    The problem I have is pits in the windshield. When the sun hits it in the evening, it looks like it's frosted and you cant see much. I was hoping that polishing it would get rid of the pits.
  13. scarless

    Are there any cheaper Power Pipe alternatives?

    Check out these guys on ebay fro stuff to fab your own. http://stores.ebay.com/SILICONE-COUPLERS-TRANSITIONS-ELBOW_W0QQcolZ4QQdirZ1QQfsubZQ2d999QQftidZ2QQtZkm http://stores.ebay.com/FCD-Tuning_INTERCOOLER-PIPES_W0QQcolZ4QQdirZ1QQfsubZ4QQftidZ2QQtZkm...
  14. scarless

    Cold Air Intake for 94 Cobra?

    If you have a MAF bigger than 73mm or throttle body bigger than 65mm, the std 3" CAIs are too small and restrict flow. You can make them out of better stuff than PVC and black rubber fittings. You can get polished 3.5" Alum pipe and red or blue silicone turbo/SC couplers, reducers, and hump...
  15. scarless

    Product that gets rid of scratches on windshield???

    What about this stuff? http://www.jcwhitney.com/autoparts/Product/showCustom-0/Pr-p_Product.CATENTRY_ID:2000756/c-10101/Nty-1/p-2000756/Ntx-mode+matchallpartial/N-10101/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=glass+oxide Edit - Also at Eastwood...
  16. scarless

    How to test a torque converter?

    It's not in the car. I'd rather have it checked before I get to the point of installing it.
  17. scarless

    How to test a torque converter?

    How do you test a torque converter to see if it is good? I picked up a used one and want it tested before I just install it.
  18. scarless

    Are the 94-95 mustang timing covers the same as those on explorers/mountaineers?

    They are not "exactly" the same. Some minor differences, but not in anything that matters.
  19. scarless

    dynoed my car today...how'd i do??

    Let us know when the stock short block blows up under that much power.
  20. scarless

    Best way to clean out an upper intake???

    You need a press? Can't you just knock them out?
Top Bottom
Back
Forums
Menu