Search results

  1. dvs bullet

    How Do You Remove thses parts!?!

    Ya I'm just off Fennel on the mountain
  2. dvs bullet

    My stang's got water leak problem please help.

    Check under the cowl buy the hood in the corner buy the driers side, it could be leaking from there or the windsheild. If not then you have the same prob Mine had you have to take off the front fender and under there where the A pillar meets the body the rot a hole through there. Mine was there...
  3. dvs bullet

    How Do You Remove thses parts!?!

    for the head lights there should be three if I am not mistaken, I used a wrench for mine
  4. dvs bullet

    How Do You Remove thses parts!?!

    there are some bolts for the front end that are right at the nose where the hood latch is, then on either side where the fenders connect there are nuts on the inside. you can see those nuts if you crawl underneath the front end alook up in the inner fender wells, they are all hidden in there.the...
  5. dvs bullet

    who's using stock radiator & electric fan

    :hail2: :hail2:
  6. dvs bullet

    who's using stock radiator & electric fan

    dvs - a pusher and a puller is not a good idea - it blocks too much natural flow across the radiator, and they may actually 'fight' with each other. I'd get rid of both, and get a good quality puller fan with shroud that you know will move enough air. And you will need a good alternator - at...
  7. dvs bullet

    who's using stock radiator & electric fan

    I've got two of the things, one is a smaller one (approx 10inches)and it's a push fan, it helped when I installed it but on hot days or in heavy traffic or lots of high acceleration the temp goes up the larger is a draw fan (appox 14inches). Could it be that I am not suppling enough current...
  8. dvs bullet

    who's using stock radiator & electric fan

    Haven't since I owned it, i'll giver a shot
  9. dvs bullet

    clunking in rear end? and charging problem...

    the clunk noise in the rear, I'm gathering that you already checked the U-joints, have you done a set of gears in it? You didn't give much info but maybe the yoke that attaches to to the pinion, the nut might have backed off. When does it make the noise? About the charging prob, check with a...
  10. dvs bullet

    who's using stock radiator & electric fan

    I have a dual set up, one on the ignition and the other on a temp sensor. I still find that mine get a little too hot for my liking, I am running the stock rad, and stock Alt. and a 160 thermostat, I don't know what's going wrong with mine but when it's on the highway it's low, light to light...
  11. dvs bullet

    Electric Supercharger???

    I think that was a caption contest in 5.0 magazine
  12. dvs bullet

    Why is there so much hatred for the Stang?

    I just laugh at the fact that they dog my car and talk up a grocery getter, (yo, your cars a pos, my 4door civic it the the $hit) :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: :rlaugh: Besides girls do love stangs!!! It's a proven...
  13. dvs bullet

    Oil Dipstick Broke In Block Now What?

    Did the same thing as astronut1885 It worked perfect for me on three different cars!
  14. dvs bullet

    Where should my oil pressure be?

    I installed an autometer phantom oil pressure gauge, it's awsome! It gives you live oil pressure (mechanical gauge), on start up my car runs 80s then goes to 65 70 when warm depending on how hot the engine and day is. It gives you alot more confidence than the factory one does. :nice:
  15. dvs bullet

    This site is addicting

    I can't get off of this site, even at work. I do think that flows are awesome but you should go to a 2 cat h-pipe to hear them better. Mine is O/R :banana: :banana: :banana:
  16. dvs bullet

    What does HO stand for?

    Was one my self, If you are doing a swap see if you can get a wrecked 5.0 car to pull the parts from your self it's nice to have all the parts you need at your finger tips. good luck
  17. dvs bullet

    Belt Tensioner/Idler Wheel...

    the tensioner comes as a whole assembly, I've replace a few and it comes all in one piece. I don't think that you can get them other wise. The virbration that you feel might be either that your wheels aren't balanced for high speed or if it only comes around when you let of the gas or coast, it...
  18. dvs bullet

    What does HO stand for?

    yup, you got er
  19. dvs bullet

    Got a Question about Stock HP #'s on 5.0's

    It's the same engine except that the newer 5.0' s are roller.
  20. dvs bullet

    Got a Question about Stock HP #'s on 5.0's

    The old boss 302 had such large cylinder heads that the thing barely started breathing until 4g, they are a pig off the line unless modifed. Any way who cares if the mustangs were faster or slower than the cameros, they were out selling them 3 to 1 at the dealerships, that's why the camero is...
View older results
Top Bottom
Back
Forums
Menu