Search results

  1. dvs bullet

    What happened now!?

    not a bad job if you don't have an A/C car but if you do it's a p.i.t.a.!I would replace it, some people don't because of their weather but if your windows fog up you need your heater core
  2. dvs bullet

    How did you get your drive shaft bolts off?

    you can get a 12 point 12mm socket from your parts store, they are cheap and you can use the adapter to put it on a breaker bar ( for leverage ). Jack it up and set your parking brake. If you kick it the wrench could slip and strip the head, then you're really up the creek And if all else...
  3. dvs bullet

    IDIOT drove my car, question about clutch

    I can see it from both sides of the coin, I was thet tech at one point and I'm the customer now ( for very few things ). some times it would drive you nuts to have the customer there but I usually didn't have a prob unless they were asking tons of questions and getting me distracted. I don't...
  4. dvs bullet

    Brand of TFI Module

    the last one I got was a motorcraft one, it's been great, I had alot of probs with the wells ones
  5. dvs bullet

    Why is this Icon in Our Smiley List???

    there are alot of us, and I use it. :canada:
  6. dvs bullet

    The "CAI" is NOT a "performance" modification.

    I totally agree with this comment. The people that make these products will not tell you the whole story either, prime example is "It makes 20 Horse over stock systems" well what they aren't telling you is they are probably still using the intake silencer, with a regular paper filter. Also What...
  7. dvs bullet

    Fuel Pump Noise???

    Mine did the same for a while, then it quit. :(
  8. dvs bullet

    Fuel Pump Noise???

    depends how loud it is, you can normally hear the pumps slightly
  9. dvs bullet

    The "CAI" is NOT a "performance" modification.

    I went back to a stock air box with the K&N filter with a 75mm maf, I didn't notice a difference changing back. I think that it's mostly the filter that does the gain.
  10. dvs bullet

    more fuel gauge probs.

    I think the slosh module is a chip that fastened on the back of the gauge cluster, that's something I could try. I really need to fix this prob. it's really getting on my nerves. any one else have more ideas?
  11. dvs bullet

    more fuel gauge probs.

    Well I have had a prob with my gauge for a while, first it used to read right full most of the time ( sometimes give me a normal reading ) . So I replaced the sending unit ( I figured I would put one in while I was putting in a new fuel pump ), it was fine for a while, but now it reads a 1/4...
  12. dvs bullet

    Anyone else notice that your 75mm Pro M is only 75mm on the inlet side?

    I third that, it's to keep up the volocity to hep draw air through the venturi
  13. dvs bullet

    The thread of the nicest FOXES!

    Here's mine
  14. dvs bullet

    1.7 rr on stock cam?

    I went from 2.73's to 3.55's and it was an awesome difference, I wish I went to 3.73's :rolleyes: mine is a 5spd though
  15. dvs bullet

    Help me create the "Surging Idle Checklist"

    WOOOOOHOOOOOOOOO!!!!!!!!! Thanks Jrichker, every one else!!!!! my Idle prob is cured!!! My mass air meter was filthy! and I needed a new IAC motor. The combination between the two really made a mess!! thanks every one for your all advice :nice:
  16. dvs bullet

    T5 fluid fill

    I was just kidding around, Actually before ( like 6 years ago ) I went to a lube place and they tried to put gear oil in it, I've never gone back to one. I do my Changes at my old work on a hoist, I figured that that wouldn't help alot of people here so I though that I would jab in a funny...
  17. dvs bullet

    T5 fluid fill

    jiffy lube............ let them deal with the BS. :D
  18. dvs bullet

    my oil leak question again how do i fix

    another vote for checking the PCV system.
  19. dvs bullet

    Help me create the "Surging Idle Checklist"

    Just a little more on that, my basket was really stuck in there ( I mean really stuck!!!!) I ended up using a tool that I made to get it out. I use a bolt that I welded a screw on the end of it, the screw really digs in on the basket and the bolt head give you something to grab on to. If it...
  20. dvs bullet

    Help me create the "Surging Idle Checklist"

    Thanks man! :nice: It will give me more ammo when I go after my car with this list :hail2:
Top Bottom
Back
Forums
Menu