Search results
-
P0102 Code, Mass Or Volume Air Flow A Circuit Low
I've never had a maf security torx screw break on me. Before you buy a new maf sensor, try cleaning your old one. remove it as described above, then with a q tip and some maf cleaner, gently and carefully clean the two maf elements, reset computer, then start her up and see if the fault reappears.- 94GTCoupe
- Post #3
- Forum: 1994 - 1995 Specific Tech
-
It's Backwards ?!
Which screw are you talking about? The threaded rod on the right side (passenger) of the throttle body will open the throttle blade (allow more air in) when turned clockwise. The allen screw under the little white rubber plug, on the left side (driver) of the throttle body, is the idle air...- 94GTCoupe
- Post #2
- Forum: 1994 - 1995 Specific Tech
-
Help With Trans To Bellhousing Rounded Bolt
Righty tighty, lefty loosy! And those damaged nut/bolt removers are awesome. Even work on certain types of locking lug nuts. used them to remove the lugs off a rear disc focus at the wrecking yard not too long ago. I'll be converting my brothers focus, soon as I have time.- 94GTCoupe
- Post #10
- Forum: Fox 5.0 Mustang Tech
-
Subwoofer Box
I wont be able to help, sorry. I drove a 94 gt coupe. Hopefully someone will come along with some advice.- 94GTCoupe
- Post #3
- Forum: Mustang Sound & Shine All
-
Need Help Tranny Swap Check Engine Light..
Check stored fault codes first. Also, if it was a proper swap, the ecm should have been swapped with a manual ecm. pull the passenger side kick panel and ecm code. it is printed on a sticker on the side of the ecm.- 94GTCoupe
- Post #2
- Forum: SN95 4.6L Mustang Tech
-
94 Cobra Not Running...working Thru Checklist...need Help
Fix or replace your engine harness wiring first. and replace that tfi/icm.- 94GTCoupe
- Post #2
- Forum: 1994 - 1995 Specific Tech
-
'94-'95 Catback In A '98?
Iirc, the tailpipe mount of the 98 is different in some way.- 94GTCoupe
- Post #2
- Forum: SN95 4.6L Mustang Tech
-
Asian Quality Assurance
Glad they're ok.- 94GTCoupe
- Post #15
- Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
-
-
How Do I Test Pip W Test Light?
@90lxwhite , @jrichker answered your question.- 94GTCoupe
- Post #8
- Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
-
How Do I Test Pip W Test Light?
http://easyautodiagnostics.com/ford/4.9L-5.0L-5.8L/ignition-module-tests-5 You'll need an LED test light.- 94GTCoupe
- Post #2
- Forum: 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
-
-
Fender Bender :(
The flaps are apart of the air bag. you either need a new air bad or an airbag delete. (I happen to have a passenger side air bag for sale. PM for details.)- 94GTCoupe
- Post #5
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-
-
Fender Bender :(
The air bag is held by two bolts, attached to the dash board frame. take off the glove box door and go in from the rear. you'll also need to disconnect the air bag connector, you'll see it back there.- 94GTCoupe
- Post #2
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-
-
-
-
-
-
New Girl, Miami Hi
Welcome aboard! Try posting your issue in the New Edge Tech section. Someone will come along to help you out, as I'm an AC dummy.- 94GTCoupe
- Post #2
- Forum: The Welcome Wagon
-
Rear Brake Install 2001 V6
Rear caliper pistons are rotated CLOCKWISE, not counter. make sure the notches on the caliper piston are lined up correctly with the nubs on the rear of the brake pads. Step #46 in link below for proper rear caliper piston orientation...- 94GTCoupe
- Post #3
- Forum: 1996 - 2004 SN95 Mustang -General/Talk-