Search results

  1. M

    A little help with these codes please

    P0340 - Camshaft Position (CMP) Sensor Circuit Malfunction P0430 - Catalyst System Efficiency Below Threshold (Bank 2) I can't find the P0316.
  2. M

    Where is MCM Motorsports?

    Glad you're still going to be around Mike. I'm sorry for all the crap over at MPH, I haven't really caught much of it, but you're definitely a standup guy and I hope you get everything worked out. Dave
  3. M

    Focus Pump Install?

    It was really easy. Took me about an hour. 1. Disconnect the wiring harness between the tank and rear bumper, and start the car. This will run any line pressure out. 2. Remove the 3 bolts at the filler neck. 3. Disconnect the fuel filter. 4. Place a jack under the tank and ensure it's...
  4. M

    injectors for a S/C engine

    I'd do 60's. 42's won't be enough.
  5. M

    Fuel Rail Question

    Yes, you can. That's what I was going to do, but I ended up picking up the Kenne Bell schrader valve adapter for cheap.
  6. M

    Quick Help please!!!

    Glad you got it all worked out. I couldn't tell you how many times I've gone over something 100 times, and yet I've overlooked the stupid problem every time. :)
  7. M

    Quick Help please!!!

    Doubtful. I pulled mine off last weekend and the gasket was shot, and the car was fine w/out a new one. Did you check the vacuum lines between the TPS and IAC? If you want, grab a few pics of things and maybe something will stick out.
  8. M

    Quick Help please!!!

    Also, if you give the car gas when you try and start it, does it run?
  9. M

    Quick Help please!!!

    Double check everything. Hose on the back of the plenum, pcv, iac, tps, and maf connections. Do you have a code reader to see if it's throwing any codes?
  10. M

    Quick Help please!!!

    What type of stalling? Does it hold an idle at all, die when you give it gas, stall randomly?
  11. M

    Oil Pan Tap?

    Correct link is here: http://www.dssracing.com/power_adder_fitting.html From what I can tell, it looks like you need to cut a hole into the oil pan and then attach the backing plate to it. Is this correct? If so, you'd have to drop the pan, which would require you to drop the k-member as...
  12. M

    need belt for ProCharger P1SC

    If you know the length of the belt you can pick one up at Napa. I knew my car needed a 108" 6-rim belt for the vortech and Napa stocked them. Check the install manual for the procharger and you should be able to find the length you need.
  13. M

    03 GT a Lemon? Help!

    What did the carfax on the car show? Maybe it's been hit in the past.
  14. M

    Need Help Installing S/C Boost gauge. Anyone?

    I tapped my gauge in right where I ran my bypass in. There's a rubber grommet on the drivers side of the firewall. I ran a small hole through that and just slid the vacuum line through it. Ran that into the dash and hooked up the gauge. Probably a 30 min job at most.
  15. M

    troubleshooting?

    Check all your piping. I had a similar problem w/ my car and it ended up being the maf connection to my powerpipe.
  16. M

    Whelp, she made 349.9 / 348.9 at the wheels

    Power is nothing if you can't put it to the ground. You've got a nice setup to start catching him w/ too. ;)
  17. M

    Transmission ?

    First thing I'd do is the fluid. My car had the grind starting at 10k, and I swapped fluid at 15. It's nowhere near as bad as it initially way. I went w/ Royal Purple when I did it.
  18. M

    Whelp, she made 349.9 / 348.9 at the wheels

    That could be part of it. I ran 93 for 2-3 weeks before I put the blower on, but I'm anal like that. I'd say you're probably pretty close to your peak at 6 lbs. Not knowing all of your mods. I've got a 3.10 pulley at the house if you want to see what it makes at 12 lbs. ;)
  19. M

    Whelp, she made 349.9 / 348.9 at the wheels

    That's what's weird. If you're pinging, that's a lack of fuel. What do you have the plugs gapped at, and what type of plugs are you running?
  20. M

    Whelp, she made 349.9 / 348.9 at the wheels

    Did you guys datalog fuel pressure? Did that fall off at the top?
Top Bottom
Back
Forums
Menu