Search results

  1. StangPro

    chin spoiler

    The aftermarket company that was supplying us, Steeda, MT, etc is now out of business. Not sure if they were Ford's supplier also. Expect the chins to get harder to find and jump in price. The same company also made the grille deletes, so same story there too.
  2. StangPro

    Next mod, few questions

    Look in the StangPro articles and there's a full install of the plenum and TB. I'd pass on the inlet from RPmoutlet. I've heard a lot of complaints about their customer service.
  3. StangPro

    Densecharger

    You should get around 5-9hp, but leave the MAF alone. All of our testing shows a 5hp loss changing MAFs
  4. StangPro

    Pics of MAC Plenum

    Gotta love MAC quality (or lack thereof...)
  5. StangPro

    UCA/LCA for suspension novice

    Steeda aluminum LCA's with the HD or FRPP UCA's and you'll be fine. Skip the adjustability.
  6. StangPro

    Pics of MAC Plenum

    After seeing the inside of ththe MAC plenum, how can you say that? You'd have to spend about an hour cleaning up that ugly thing to get it anywhere near the others. What did the MAC run you? The others are onyl about $150 so I can't see any reason to get the MAC unless it's on...
  7. StangPro

    Cold air intake?

    What? Why would you do any of that? :shrug: All you have to do is pull the fenderwell cover back a little and push it on. Removal and/or installation takes about 10 minutes, 5 if you have a helper.
  8. StangPro

    Steeda

    All 4.6l pulleys should be steel, or they'd have to be HUGE to match the stock damper weight.
  9. StangPro

    which do u think is better Demolet CAI or JLT

    Any production paint color is available now.
  10. StangPro

    which do u think is better Demolet CAI or JLT

    Wow, I didn't realize how big that pics was! :D
  11. StangPro

    which do u think is better Demolet CAI or JLT

    How does tacky chrome look better than this? The DeMolet and JLT are some of the few systems that actually add power. You'll be happy with either system.
  12. StangPro

    Did I run out of the cheap mods?

    I'd go with a DeMolet CAI, and a Predator. After that, you're laying down some coin. Skip just the dropin k&n that a lot of people recommend as everytime we back-to-back dyno test it versus a stock filter it adds nothing, but does take away from your wallet.
  13. StangPro

    what else

    Gears and either a Dragon or Accufab TB/plenum combo. A different meter will lose power at your mod level. About a 5hp loss usually.
  14. StangPro

    04gt 3650 Oil Change

    We've gotten a lot of good responses from the RP fluid. The only other one that we've heard a lot of owners say works well is the Amsoil (not sure which they each used). Mobil1 or anything else Ford/TTC recommends is junk and the fluid level change is a joke.
  15. StangPro

    C&L or JLT CAI

    I'd look at JLT or DeMolet over the C&L. I think both are cheaper and I know both perform better.
  16. StangPro

    Self-Porting Job on the Plenum

    The castings are terrible, so expect to spend about 3-4 hours doing it if you're an experienced Dremeller. Be sure to tape off the flanges before you start to prevent them from any damage. Personally, this has saved my behind a few times now as the bit got out of control or the shank of the...
  17. StangPro

    U/D Pullies

    wow....This guy is going to hate you when he cracks his oil pump gears... Only SHM and Steeda have a clean track record and actually properly tune the damper material to cancel the harmonics that will destroy an oil pump, or best case cause you to rebuild the engine sooner. Sure, a lot of...
  18. StangPro

    Shock, Strut help?

    70/30 is meaningless. Those numbers tell you almost nothing and it is impossible to compare any brands based on that. Your stock dampers might be 70/30. Read this for more info: http://www.stangpro.com/cgi-bin/yabb/YaBB.cgi?board=rant;action=display;num=1094149247 That said, almost any...
  19. StangPro

    CAI Help

    The MAC straight shot is for looks only. I wouldn't expect any power from it. Every MAF we've tested on any configuration that isn't actuall pegging the stock meter (around 400hp) LOSES power, about 5hp usually. Recommendations: Stock with the stock MAF and avoid MAC parts like the...
  20. StangPro

    ? about MACH 1000

    They were all made by Visteon. http://www.visteon.com/products/automotive/mach_audio.shtml
Top Bottom
Back
Forums
Menu