Search results

  1. 9

    aftermarket wider 99-01 Cobra rims?

    03 Replicas I went with the 03 replicas in chrome. Check AFS on eBay for your wheels. Mine are 18 x10.5's in the rear and 9" up front.
  2. 9

    Put a turbo on a N/A 2.3?

    Adding a Turbo Let's see, the turbo and manifold, injectors, EEC, fuel pump, adjustable pressure regulator, all the oil and water plumbing for the turbo and the intercooler, exhaust pipe and the rest of the exhaust to let it breathe and a 5 speed, clutch PP and TOB with bell housing if you're...
  3. 9

    A/C Replacement

    A/C Compressor If you decide to get the car, I have a new A/C compressor from my 03 engine swap.
  4. 9

    Headers for 98 gt ?

    LT Headers Just remember with LT headers you have to remove the passenger side header to change the clutch, unless you have a T-56.
  5. 9

    03/04 Cobra Motor in a 96 Cobra???

    03 Engine Swap Actually, you need the entire wiring harness and gauge cluster along with the new PATS module and EEC. I did the swap in my 99 last year.
  6. 9

    clutch/TOB/flywheel

    Sounds to me that you need to pull it apart and fix the wobble before the pressure plate comes loose and destroys the transmission.
  7. 9

    99 cobra header install??'s

    Header Install This would be a great time to ditch the stock K member and make life easier from now on. I used 2 6 ton jack stands to support the engine, 1 on each side of the oil pan where it mates to the block. I installed JBA shorties and love them.
  8. 9

    Should I swap out my IRS for solid axle?

    OregonMustang- If you want to ride in an IRS equipped Cobra that will snap your neck, come on by and I'll take you for a ride in mine.
  9. 9

    3.73s, 3.90s, or 4.10s?

    Go to the 4.10's, you'll love 'em!
  10. 9

    Finally have some pics of my broken Turbo

    I have a completly rebuilt 88 TC engine with trans, new stage 3 turbo, DP and full stainless exhaust.
  11. 9

    What makes an 03/4 Cobra look so good?

    When you drive the 03/04 Cobra you will know why the look so good and run so well!
  12. 9

    Should I swap out my IRS for solid axle?

    Beef up your IRS I have upgraded my IRS with coil-overs, pinion snubber, MJ's brace, DSS level 5 halfshafts and urethane bushings. I have no wheel hop. I just put my 26x12.50x16 MT ET streets on and took them for a ride; they hook and no wheel hop.
View older results
Top Bottom
Back
Forums
Menu