Search results

  1. Jason 302

    03 Cobra Vs Coyote

    Write up of coyote limits http://www.americanmuscle.com/s550-coyote-power-limits.html Looks like better oil pump internals is a must as well. 03/04 Cobras can pop under high gear/high speed runs under high load. Lots of heat from the SC and something about a weak coolant area in the cylinder...
  2. Jason 302

    03 Cobra Vs Coyote

    600-650 is what I've heard. Connecting rods give out at that point. Stock block and crankshaft can handle 1000+. So basically a good set of rods and pistons and sky is the limit.
  3. Jason 302

    03 Cobra Vs Coyote

    Doing a Terminator swap into a fox is a big wiring project, as you have to rewire pretty much the whole car, from what I've been told. With a coyote you can buy the Ford racing harness and computer and be done with it. You can find complete 03/04 Cobra conversions on eBay with engine, tranny...
  4. Jason 302

    Any "old" stangnetters left?

    Nice. Welcome back to the thunderdome.
  5. Jason 302

    How To Plug Metal Heater Line

    This is what I did. Works great
  6. Jason 302

    Need Help Choosing The Best Rear Gear

    I had 3.73's before, I don't miss them. 4.10's rip harder, especially at the strip.
  7. Jason 302

    Need Help Choosing The Best Rear Gear

    If you're wanting quicker ET's, go with 4.10's. That's what I did and have no regrets whatsoever.
  8. Jason 302

    SOLD Mavromont 17x8 Pony R Rims & Tires (4-lug)

    You can reply in here if interested, or e-mail me at... [email protected] Thanks
  9. Jason 302

    Build Thread Enola- Finishing touches

    I hope to go on my first journey with boost later this year. I'll be going with a V3-Si kit though......little more "bolt-on" lol. Good luck
  10. Jason 302

    Build Thread Enola- Finishing touches

    Who? lol OP, you have a lot of patience to build that thing and sort it all out. I would have probably gotten frustrated and given up by now. BTW I also love the sound of those roots superchargers, just like the 03-04 Cobras I've always wanted.
  11. Jason 302

    SOLD Mavromont 17x8 Pony R Rims & Tires (4-lug)

    These are aftermarket 17x8 PonyR rims made my Mavromont Industries. General Altimax 245/45-17 tires. Four lug bolt pattern. They are in LIKE NEW condition! I bought these rims and tires brand new a few years ago. They have very few miles on them, probably only around 5,000 or so. Still like...
  12. Jason 302

    Im Trying To Make More Power. Any Suggestions?

    As mentioned by cleanLX, there's a lot of different routes you can go. I can tell you what not to do though.... DO NOT put a forged rotating assembly in a stock 5.0 roller block. That's like parking a brand new Ferrari in a rickety old shack that's about to fall down. Waste of $$$$$. Stock...
  13. Jason 302

    How To Avoid Issues With 17x8 Cobra R's On An 89 Gt?

    I ran 17x8 PonyR rims with 245/45-17. No rubbing or anything. Direct bolt-on. You'll be fine.
  14. Jason 302

    Sve High Performance Fuel System

    Awesome, thanks for the info. I thought that post was going to get lost and I was going to have to start another thread on the subject lol. Best deal I've seen on the tuner kit is from Anderson, power pipe included, $2,999 (link in above post). I will definitely send you a PM when the time...
  15. Jason 302

    Popping / Grinding In Low Speed Turns

    What LSD is it? Ford trac-loc? I agree, does sound like the clutch discs are stacked in too tight if that's possible. I would closely inspect your spider gears also.
  16. Jason 302

    Sve High Performance Fuel System

    So help me figure out the best method to go about this. My stock fuel lines and rail is able to support the power I'm wanting to make. I need more pump and bigger injectors. I'll probably go 60# injectors to give me a little room to grow down the road. I'm thinking two options... Option #1: -...
  17. Jason 302

    V3 Almost!

    Good luck. I'm hoping to install a V3 within the next year, this thread has been helpful with my research.
  18. Jason 302

    Sve High Performance Fuel System

    So do you guys think if I put a 340 in the tank along with some aftermarket fuel rails, it would be sufficient for my power goals? Do aftermarket fuel rails have a spot for a regulator or is that something that will need to be plumbed in elsewhere? Since the fuel rail is good to 500hp, do I...
  19. Jason 302

    Sve High Performance Fuel System

    Yeah, my plans are to add a Vortech V3 Si "tuner kit" from Anderson, come up with my own fuel system, and keep it conservative....450-470rwhp max. Still running stock bottom end parts. Another question I have is, if I run the SVE kit above and some BBRC fuel rails, how to plumb in a fuel...
  20. Jason 302

    Sve High Performance Fuel System

    I always thought that once you go past the 450rwhp mark, the entire fuel system should be upgraded.
Top Bottom
Back
Forums
Menu