Search results

  1. Gibbo97

    Turbosnake95's Dart 331 / T-76 Turbo build up!

    +1 on the superior axles - that's what I run :)
  2. Gibbo97

    bbk longtubes and frpp dipstick help!

    Don't know what the deal is with you guys and Lokar but my dipstick from them has worked just fine. I did have to bend it a little because of the main support but otherwise it fit perfect. IMHO Lokar makes some really nice stuff, when I did my fox throttlebody conversion I used a Lokar throttle...
  3. Gibbo97

    Big CONGRATS to Mr. and Mrs. Killercanary

    congratulations!
  4. Gibbo97

    Pics of Forest Green Mustangs.

    old color : New color:
  5. Gibbo97

    Which Wheels?

    I'm a bit biased but I like the rebels :P
  6. Gibbo97

    anyone with a vortech and a fox throttle body conversion needed.....

    The bracketry on our SN95 units puts the blower closer to the motor than in the foxbodies, that means the tube will be too long by about 2 inches. You can use the tube but you'll have to cut off about 2 inches and you'll have to use a reducer coupling that goes from 3in to 2.75 in or something...
  7. Gibbo97

    Several weird supercharger problems with new vortech install.

    I'd say go with an even shorter belt- I had to take off the upper idler pulley and get the belt on mine in- it was a 102.0" belt that fit for my application (with a smog delete pulley). As for the bucking- my guess is that you're having spark blowout, check the gap on your plugs and gap them...
  8. Gibbo97

    How do i make it possible to know my fuel pressure from inside my car?

    Basically the electrical guage has the fuel pressure sensor located in the engine bay area and sends the information via wire to the gauge, so no fluids are in the cabin. Most folks put the sensor where the schrader valve is on your fuel rail, but some aftermarket fuel pressure regulators...
  9. Gibbo97

    t56 install problem

    to use the reverse lockout feature I refer you to this: http://www.drivetrain.com/gmt56inst.html The part number listed in the diagram is a GM part number FYI. There's also an article here on stangnet about installing a T-56 here : http://www.stangnet.com/pbullitt/tremect56/index.html...
  10. Gibbo97

    94-95 Aftermarket Alternator Bracket? Power Steering Bracket?

    I'd have to disagree with turbo's assessment that the belts would be out of alignment- for that hotrod set is designed around our waterpump and the timing cover- if you scroll down a little bit on that page on march's site it says specifically that using that pulley and bracket set requires the...
  11. Gibbo97

    94-95 Aftermarket Alternator Bracket? Power Steering Bracket?

    there's only one bracket set that would have any remote chance of fitting but the problem lies in the positioning of the accesories: it's their hotrod bracket and pulley set but they place the alternator and P/S way above the factory spots. I noticed this set because it's the only one they have...
  12. Gibbo97

    I need a stock water pump pullly!

    Before you get a factory w/p pulley you need to be sure your kit doesn't come with one already, for if it doesn't you'll need to get the pulley from vortech. The reason is the crank pulley will create interference from the factory size pulley (the supercharger belt will hit the factory w/p...
  13. Gibbo97

    T-56?

    I'm running the D&D kit and it's great- the two biggest issues I can think of are the mounting of the crossmember brackets (I had mine welded in but you can bolt it in as well) but they are included in the kit, and due to the fact that the T-56 is wider and if you have long tube headers you may...
  14. Gibbo97

    Wheel Spacers/Painted Calipers...Rolled into one Post *DUW*

    http://www.jegs.com/webapp/wcs/stores/servlet/CategoryDisplay?lang=-1&catalogId=10002&storeId=10001&categoryId=57843&searchItemId=371453&CT=999 Baer Eradispeed +1 rotors
  15. Gibbo97

    Is this a great deal? Eddy Heads...

    according to the part number on edelbrock's website that is the part number for the bare head: http://www.edelbrock.com/automotive_new/mc/heads/ford_sb_performer.shtml
  16. Gibbo97

    Is there such a thing?

    Russell Performance makes a set for 1987-1993- I know that the side that goes to the fuel rail should work- but my question would be how are the hard lines flared? btw here's the link http://store.summitracing.com/partdetail.asp?autofilter=1&part=RUS%2D651104&N=400081+315885+115&autoview=sku
  17. Gibbo97

    Are the 94-95 mustang timing covers the same as those on explorers/mountaineers?

    yes it is but if you want a new one paul I have one sitting under my dresser in here you can have for oh hell 50-60 bucks?
  18. Gibbo97

    t-5 rebuild

    I'd say check out www.hanlonmotorsports.com - they have a video you can order that shows exactly how to rebuild a T-5 and a slew of parts to rebuild it as well.
  19. Gibbo97

    polished Trick Flow intake!

    that looks awesome! how long did it take you?
  20. Gibbo97

    c6 ZO6 vs 03 Cobra Vid

    As much as I hate to say it the C6 generation Z06 is just about the best bargain you can get for the money- an aluminum smallblock 427 (the LS7) putting out 505hp on all motor, hydroforged aluminum frame, specially baffled exhaust, the list goes on and on. Sure 70k isn't cheap to the everyman...
Top Bottom
Back
Forums
Menu