Search results

  1. jammer84_03

    New here. Questions about my stang.

    and another quick one... go to mustanggt.org and use the decoder for what you have in the rear. alot cleaner way of doing things ;)
  2. jammer84_03

    Tilt steering?

    pull the dash and pull out the light in the back of the instrument cluster. it just unscrews from the back of the assembly
  3. jammer84_03

    Fuel Pump on 90 GT won't prime after driving

    pump might be over heating.... do you run around with less than a 1/4 or 1/8 tank? does it do it when you have different fuel loads in the car?
  4. jammer84_03

    New here. Questions about my stang.

    i would do the cheap 3g upgrade to the alt. very cost effective and well worth the easy trouble. its under the useful thread index at the top of the tech page
  5. jammer84_03

    GT 4 luger goin 5

    as for the 94-95 spindles. i have the dual pbr's from a 04gt. those are about the most cost effective brake setup. you can get the direct swap brake lines from maximum motorsports http://www.maximummotorsports.com/store/index.php?main_page=product_info&cPath=49_144&products_id=684 i...
  6. jammer84_03

    Valve Lash?

    checked to see if the return line isnt blocked?
  7. jammer84_03

    any one with this set up?

    had the e303 with iron original gt40's, 30 over, ford stamped 1.7 roller rockers
  8. jammer84_03

    help with valve ticking.

    check for a colapsed lifter, those have a ticking noise as well. just take of the valve covers and see if ya got a loose rocker. if you try and tighten it down and will not until it bottoms out, then it time for some new ones.
  9. jammer84_03

    Fiberglass Doors?

    go to turbomustangs.com and take a look at the tech section. it tells you in a little detail how to do your own carbon fiber doors. just an alternative if you would like
  10. jammer84_03

    xe264...good cam?

    take it no one has used this cam yet....
  11. jammer84_03

    Pulling motor for oil pan gasket, what am I forgetting?

    use the one piece....i used one and i love it...no probs with it so far....just dont use cork
  12. jammer84_03

    xe264...good cam?

    bump
  13. jammer84_03

    xe264...good cam?

    anyone used the xe264 from comp cams? i had to get a different cam from the e303 that i had (broke a lifter and it took out the block and cam). it cam with the block i got. will i notice a difference over fords alphabet cam?
  14. jammer84_03

    LOW VACUUM NEW CAM

    nope....see my sig. but im about to change to a cc xe264 for a cam and bore 30 over.
  15. jammer84_03

    How many here are using crane 1.7 rockers with the stock valve covers?

    now...the question is are they stud or pedistal. i have ford's crane stamped 1.7 rr's off the 93 cobra. all i had to do was remove the baffle. im using the rubber coated metal gaskets from frpp. no spacers
  16. jammer84_03

    anyone with 17x9/10.5 saleen rims?

    did you find 17x10.5's anywhere? i found the 9's but no 10.5 deep dish
  17. jammer84_03

    anyone with 17x9/10.5 saleen rims?

    looking to put 17" saleen chrome rims on my red 89gt instead of the chrome cobra r's i got on there right now, just to stand out from the crowd. and can i see some pics of gt's with the saleens? especially red gt's and i want 17's since the better tire sizes are 17's and the price isnt jacked...
  18. jammer84_03

    Spark Plugs

    what part numbers and gaps are run with the autolites?....for gt40's and e7's for future reference
  19. jammer84_03

    belt tensioner stripped.

    if you have to get a belt off (assuming thats what you need to do) take a crow bar and use the leverage from the alt and lift the tensioner. had to do that a couple times when i had my old tensioner with a stripped bolt from the previous owner
  20. jammer84_03

    Quickie Help- removing spindles

    just get the pickel fork from a local auto parts store. hit the end of it a couple times and it should pop right off the balljoint
View older results
Top Bottom
Back
Forums
Menu