Search results

  1. jammer84_03

    largest tb size on victor jr

    like the title says... i know the 75mm is what the intake is set for out of the box, but can it be opened up to a 90mm? or is it not that capable to be opened up?
  2. jammer84_03

    Fiberglass

    i know for a while 50resto had them available. not sure if it still offered as my calaloge is a few years old
  3. jammer84_03

    sn-95 a-arm upgrade

    ok. i knew there was a difference i just couldnt remember how much. the added track is what i was going for. i am throwing a set of eibach pro kit springs on til i get my griggs dealer status and start really going at it. it is a daily driver but i cant help but rr it on the weekends and during...
  4. jammer84_03

    Car randomly dies, NO power Please help. THX

    check the module. both hissin and jrichker got the electrical wiring down. ive had the issue of the battery terminals being just a lil worn and it didnt have a good connection. new connectors and wires and i was on the road. random shut off like to say. module as well. runs fine then bam it...
  5. jammer84_03

    sn-95 a-arm upgrade

    well, heres the senario. i already did the 5 lug swap, and im about to upgrade the springs to the eibach pro kit all the way around. i have new urethane bushings im gonig to put up front as well, and mm lca's in the rear. now i was told to get sn95 a-arms for the front to go with the 5 lug i...
  6. jammer84_03

    88 GT Drivers Door wont open

    make sure the doors are all the way closed. i had it happen a couple of times where the door wasnt closed all the way and it wouldnt let me open it back up til i got it all the way latched. its happened at least 10 times to me
  7. jammer84_03

    Fixable rusted frame rail?!?!?!

    i got all the stuff at home. just redid the garage and i bought a whole bunch of goodies. if i cant do it at my place then i'll buy the stuff to do it...lol
  8. jammer84_03

    Fixable rusted frame rail?!?!?!

    ok....the car is extremely solid all the way around. this is the only real spot. a little surface stuff in the rear but a lil blasting and paint will bring it back. its going under the knife in the few weeks when i store it, so im just getting all my peas in one pod. just got a turbo kits...
  9. jammer84_03

    The Mickey Tompson ET street radials WOW

    steeda has the best price on 555 dr's. 140. take em into discount tire and they will price match. thats what i did. so far i like the 555 drs better than my bfg kd's i liked the profile of the kds more though
  10. jammer84_03

    Fixable rusted frame rail?!?!?!

    i got the same issue on both sides. i was going to do the repair myself as i know many guys with stangs that have this same issue on the front frame rails. and before the damage is to bad i need to get it done. anyone got pics up of a repair they did?
  11. jammer84_03

    Fox's with PBR calipers...what hose are you using?

    maximum motorsports has the ss lines. i have them, direct bolt on. you just have to get the right thread pitch.
  12. jammer84_03

    control arm bolt sizes...?

    generic is what ford uses. they just put their stamp on it and overcharge!!! been down that raod one to many times and found out later who actually supplies ( the best one to date is pennsoil syncromech is the same exact thing as gm branded syncromesh...yet gm has their name on it, therefor they...
  13. jammer84_03

    control arm bolt sizes...?

    ok. im about to replace my bushings in the front control arms, and i know the bolts are prob rusted a lil and i am just going to buy new ones before i even have to worry about the condition of the old ones. also, the rear lower control arm bolts are worn out really bad and i want to replace them...
  14. jammer84_03

    How to fix the Gangster Lean step by step guide

    i msged daggar about the sticky, we can only hope and wait at this point. 90% of this forum could use this link. i do trim and upholstery for a living and i get questions all the time on this topic. about to do it to my seat personally when i re cover them
  15. jammer84_03

    what about this type of turbo kit.

    the turbos are crap, nine times out of ten the headers and piping wont fit right and take alot of modifying. turbo kits are a big pain to work even when they fit right. google b&g custom turbo and ask for brian when you call. he has setups for cheap and they fit like a glove. he is very well...
  16. jammer84_03

    Budget minded RR suspension

    yeah...i forgot to even mension the subframe connectors!!!!! thats the first and all important thing. lca's should be on teh list and if you can afford it something to keep that rear end located. i can vouch for the "rear steer" on the stangs as i had it really bad when i started out. i was...
  17. jammer84_03

    Budget minded RR suspension

    maximum motorsports is great for the pricing. i personally am going with griggs. redo'ing all the bushings in the front of the car is a great place to start using delrin(if you dont mind the feeling of daily driving) or poly. make sure to get a solid driving shaft to get rid of the flexible rag...
  18. jammer84_03

    How to fix the Gangster Lean step by step guide

    this should be submitted for a the usful thread index since this is such a problem on all foxes and just about everyone will want to do this at some point. could a mod do this for all of us?
  19. jammer84_03

    ELECTRIC FAN ON TOGGLE SWITCH

    look in the useful thread index under junkyard parts, the years are listed. and there are always ones in the junkyards to get em from
  20. jammer84_03

    Official Thread of Applicable Junkyard parts for Foxes

    anyone know what the new 6g alts are off of in the junkyards???
Top Bottom
Back
Forums
Menu