Search results

  1. BlueMonster65

    Should i mod my mustang?

    YES!!! you should modify it. but first upgrade the brakes. and change to V8 spindles. its worth it even if you try to squeeze power out of a 200 inline 6. more power will always require more braking power. i cannot support the idea of putting a 200 6 in the car with a t5 it would cost the...
  2. BlueMonster65

    few pics of my explorer rear disc brake setup

    the kit is direct from Ford racing performace parts part #M-2300-G Ford Racing Performance Parts [M-2300-G*]or Currie part#CE-6012 Currie Enterprises Racing Rear End Categoriesthe tabs and hoses are a Currie part# CE-6013E Currie Enterprises Racing Rear End Categoriesthe junction block tab i...
  3. BlueMonster65

    Electronic Fuel Pump

    i 've got to agree with the majority on this. put a mechanical back on. electric pumps are not required for a NA carb engine and i am certain it will cause you a significant amount of headaches. should you absolutely positively need an electric pump get a A1000 and regulator and run at least...
  4. BlueMonster65

    my hyd. clutch install

    with the demise of JMC I thought this might be useful for some other people who want to put a hydraulic throwout bearing in their early mustang. i purchased the 1400 series bearing from McCleod and the Willwood master cylinder as well. i made the hyd. line and bought a 5/16 rod end from summit...
  5. BlueMonster65

    JMC Motorsports...gone?

    i think you maybe able to get the master cyl that would normally come with the JMC kit from CNC. i found out about that after i got the Wilwood cyl. after installing the wilwood i actually like the way it fits better than the JMC kit. i did have to cut a section of the firewall out and weld a...
  6. BlueMonster65

    few pics of my explorer rear disc brake setup

    thought i share this. the explorer rear disc brakes are cheap, decent and have a parking brake setup that i really like. however it is a bit of a challenge to install them on a early mustang. the tabs for the flex hoses needed to be welded to the housing, and i relocated the main flex hose to...
  7. BlueMonster65

    Supercharger Questions

    i've got a procharger p600b. got a pulley from March for the waterpump. had to modify the ford cheapy chrome alternator bracket. and used the 5.0L procharger crank pulley. line everything up and you should be good to go. i used the A1000 for a fuel pump and changed to a fuel cell and EV bonnet...
  8. BlueMonster65

    JMC Motorsports...gone?

    yes indeed, i was extremely lucky that i was not ready to order their kit. two weeks after i spoke with them initially about the kit for a t5 they told me they could not sell me the kit and that they will no longer be selling to the public. at least they were nice enough to tell me that you...
  9. BlueMonster65

    Need help with Explorer disc brake conversion

    So i finally ponied up for a 9" rear with explorer disc brakes and i assembled most of it last weekend, but i ran into a few unknowns. anybody know what parking brake cables i should get to connect the explorer parking brake to a 65 mustang cable. i just found out about the fox mustang...
  10. BlueMonster65

    Exhaust fitments

    it fits, i was running dynomax stainless LX pipes for a long time, but they were only 2 1/4" now i must upgrade to 3" and i know thats gonna be tricky to fit under a 65. all you have to do is cut off the Fox body hangers and use some regular old school hangers/clamps. once i got it...
  11. BlueMonster65

    Pioneer Avic-D3 Review and Pictures

    very nice! great write up. you have further convinced me that the AVIC D3 is the way to go. i can't wait to get one for my 05
  12. BlueMonster65

    Phoenix Gold Amp?

    i have a Octane 2.5:2 powering a single Octane 12R dvc and i am impressed with it. for the money PG makes some good stuff. However, its no longer made in the USA and doesn't have gold plated circuit boards like the originals. but it looks and sounds pretty good.
  13. BlueMonster65

    Shelby Valence Opinions Needed

    i have the MU racing apron on my 65. fit and finish were top notch same with the shelby steel framed fiberglass hood. i had to wait a while for them to be made, i'm not sure where they have them made, but i do know they fit perfectly. also i should add that having a straight car and original...
  14. BlueMonster65

    Tasca Ford Show August 25, 2007

    http://www.warnerrobert.com/tasca.pdf Just wanted to let everyone know about this show, it's going to be big! We at LMMC-CT have setup a cruise to the show. to find out more check out our site at http://www.lmmc-ct.com/forums/showthread.php?t=48575&highlight=tasca you will prolly need to...
  15. BlueMonster65

    Anybody heard anything about this carb style EFI?

    i saw this setup at Carlisle Ford Nationals this year, and i really liked the design. they claimed it would work great for Blow thru turbo or supercharging and since i have a Blow thru setup it really caught my attention. for some one contemplating a turbo or supercharger upgrade the price of...
  16. BlueMonster65

    little video of my 67 turbo coupe

    Awesome!!! Glad to see it running. car looks and sounds super sweet.
  17. BlueMonster65

    HEI for 302

    MSD is vastly superior to the duraspark. i had a duraspark and its inibility to adjust ingnition advance curves makes it a poor choice for a performance engine. In addition to that there are very liberal tolerances which cause the rotor to rise at high rpm again causing erratic performance. i...
  18. BlueMonster65

    Good CT s/c install shops

    Try J & M Corvettes in manchester. they do alot of mustang work and there cars are pretty sick. I believe Mike is the Ford guy there.
  19. BlueMonster65

    Mustangs Unliited Car show June 10th

    Anybody heading up to the MU show this Sunday June 10th? heres some info on it: June 10, Manchester, 30th Annual Mustang Spring Round Up, Rain Date: 6/17, Hosted By The Mustang Car Club Of New England, At Mustangs Unlimited, 185 Adams St, Approximately 1.5 Miles South Of I-84, At Exit 62...
  20. BlueMonster65

    Which race mufflers?

    yeah, dynomax are pretty good, magnaflows are too. i'd suggest any straight flow thru muffler. no chambered ones.
Top Bottom
Back
Forums
Menu