Search results

  1. B

    coil spring question

    i used the external spring compressor on mine and it worked perfectly fine
  2. B

    Anyone get one of these CGC cowl gauge holders?

    I personally know the guy that makes them, and love them. AJ has a damn nice car too
  3. B

    what CR for a 306

    are you looking for 350 to the wheels or the crank, and is it a street car? 350 can be obtained N/A but will not be very streetable.
  4. B

    Need Some Drag Radials What Will Fit

    275 will easily fit on a cobra r rim. I would go with a MT or BFG over the nittos
  5. B

    Need help deep cleaning my paint?

    Clay bar should take it out. If not just wet sand it and buff it
  6. B

    SPEEDO/GEAR QUESTION

    The Gauge cluster should be calibrated to the 85mph so it should work fine with the tranny
  7. B

    What Fuel Componets Do I Need To Support These Mods?

    with all the mods that you currently have on their you are only going 14.614? Stock pump should handle it, but its not that hard to change a pump out, and its not that expensive. You might as well go with a 255 to support what may be coming in the future. 19's should be fine, but 24's will...
  8. B

    Acetone (A mustang's best friend)

    Might as well try it, what do i really have to lose.
  9. B

    Camshaft Computer Controlled Compatible...what does this mean?

    you have to be very careful about the cam that you run in the 94-95 cars. The computer used is a lot more finicky. I know steeda makes a cam or two that will work with the sn95 computer, but not 100% sure on what others would work
  10. B

    Did 3.73 rearend swap.. now thing but more problems

    Even if it was the incorrect speedo gear, that has nothing to do with the reading of the rpms. Did you check both the ring and pinion for proper stampings?
  11. B

    retrofitting 5.0L into 2000 mustang

    if i am not mistaken you can run an auto tranny with a carb set up, all you have to do is run a Throttle Valve cable
  12. B

    gt40p heads, direct bolt on?

    i have a set of mac longtubes that came off a buddies gt40p headed 302 and they went on my car without a problem
  13. B

    Anyone ever installed air horns on their fox?

    i have it done on my car and it was pretty easy, i have a compressor tank combo and a airline running from the tank in the hatch to the horn in the engine bay. The horns have a built in solenoid too. Here is the kit i bought...
  14. B

    PICS OF 4in cowl

    i didn't see any on harwoods site that swoop back like that, but the thing i like about the kaenen is how they start up at the very front
  15. B

    PICS OF 4in cowl

    These are my favorite hoods, they are made by a company called kaenen and hard as hell to find
  16. B

    Ramchargers Dual Fan still exists?

    you can get more cooling out of a DCC fan kit.
  17. B

    How do u use a torque wrench?

    select the torque you are going for and use it like a normal socket wrench when you are at the last tightening go slow and wait to hear a click, thats when you have hit your desired torque
  18. B

    Seafoam

    I did it to my car and my roommate 95 GT and we both noticed an improvment in idle and throttle response. I will say seafoam does what it says
  19. B

    Idle Air Adjuster Plate???

    where did you find that, i have been looking to get an idle control plate for a while.
  20. B

    New Radiator and Fan recommendations

    I am running a jegs aluminum radiator that slid right into place, and i use the DCC 3018, and it cools amazingly
Top Bottom
Back
Forums
Menu