Search results

  1. SN95StangMan

    Help with autometer gauges wiring- dimmer switch

    the ones i have are lit with a bulb
  2. SN95StangMan

    Help with autometer gauges wiring- dimmer switch

    thanks hissin. I was thinking that was what I needed to do, but i wanted to wait for some kind of confirmation. :flag:
  3. SN95StangMan

    Help with autometer gauges wiring- dimmer switch

    Yeah, i checked it with a voltmeter. the blue w/red stripe is definitely the source for the dimmer take a look at this: Where should the "black" wire and "white" wire from the bulb be going? Thanks
  4. SN95StangMan

    Help with autometer gauges wiring- dimmer switch

    I installed some gagues in my A pillar, but I have a problem with the dimmer function. I thought i tapped into the appropriate wire, but the problem im having is that the gauges are doing the opposite of the other lights. That is, when the interior lights go dark, my gauges light up, and vice...
  5. SN95StangMan

    Aftermarket Water Temp and Oil Pressure Sending Units

    I got mine at the local home improvement store. I figured it was better than dealing with the clowns at AZ.
  6. SN95StangMan

    timing cover ???

    yeah, you would have to change to the fox accessory setup. just get yourself the right timing cover.
  7. SN95StangMan

    Aftermarket Water Temp and Oil Pressure Sending Units

    FYI, I used the "Ernan" method for the oil pressure senders today and it worked great. I did not have to remove any accesories, I just jacked the car up and worked from both underneath and from the top. I could not find my digi cam so I snapped some cheap cell phone pics. Getting this ground...
  8. SN95StangMan

    what the heck is this??

    Looks like you have an aftermarket chip with a knob for different settings.
  9. SN95StangMan

    Aftermarket Water Temp and Oil Pressure Sending Units

    I was able to take a trip to the parts store. They didnt have the housing with the bung in stock, but I grabbed the part#. This is the same unit at summit: Proliance Ready-Aire 9523 - Proliance Ready-Aire OEM Replacement Water Necks
  10. SN95StangMan

    Aftermarket Water Temp and Oil Pressure Sending Units

    let me know if you do that, and if you get a part #. I am going to install some gauges tomorrow. The last time I went to AZ, they only had the regular replacement one that I would have had to drill and tap.
  11. SN95StangMan

    Aftermarket Water Temp and Oil Pressure Sending Units

    Ernan's post http://forums.stangnet.com/626677-wanna-install-autometer-oil-press-gauge-keep-stock-one-working-here-how.html
  12. SN95StangMan

    Shift quicker

    The harder shifts will actually increase the life of the tranny. Quicker shifts = less wear on the clutches
  13. SN95StangMan

    Shift quicker

    +1 TCCoA Tech Articles Read the article on "modifying the valve body to jerry's specifications"
  14. SN95StangMan

    Wiring gauges, question about inline fuse

    I was going to install some AM electric gauges in the A pillar in the next few days. Now, their instructions say to use a fast acting 3AG 4 amp cartridge fuse. Thats this kind: My plan was to combine the wires that feed the power to the gauges and use a single wire to tap into a 12v...
  15. SN95StangMan

    A good intake gasket

    I'm not sure he wasnt talking about the 1250's, which are most recommended here only problem with these is that they come with the crappy cork ends as opposed to the rubber ends that the parts store units come with. Also, you need to trim around the water ports. Both sets will do a good...
  16. SN95StangMan

    A good intake gasket

    You will also need to purchase the upper to lower intake gasket for the GT40 intake separately. Looks like this
  17. SN95StangMan

    what size tires do you run on 18's

    265/35/18 Front 295/35/18 Rear
  18. SN95StangMan

    tire heights?

    here you go Tire size calculator
  19. SN95StangMan

    03/04 cobra A arms

    then you have to swtich to a coil over setup if you havent already, and the cost rises more :D
  20. SN95StangMan

    Code 159 - MAF Sensor Fault

    I just pulled 172 and 176 this afternoon- running lean. Ill trade ya for it. :)
Top Bottom
Back
Forums
Menu