Search results

  1. maximos

    Clutch Problem?

    I spent about 20 minutes pulling out sludge from inside there with Q-tips. By the time I was done, the Q-tips were coming out clean. I was able to track down a new IAC today at a local parts store. It's made by a company called BWD - Should I stick with Motorcraft or should I go ahead and...
  2. maximos

    Clutch Problem?

    Thanks for your responses guys. Right now the squealing and the smell are gone. The RPMs are still hovering and the car can drive itself as I described above. I do have a vacuum leak on the very thin A/C line, but I taped it up and I assumed it was taken care of because the A/C started coming...
  3. maximos

    Clutch Problem?

    I just had a new clutch put into my car and the problem is still there! I am really at a loss for words right now. I could really use some help from all the Mustang Gurus out there about this one. Just to sum everything up: My car was starting to make some noise from the drivetrain area, it...
  4. maximos

    Clutch Problem?

    I just tried the car without the IAC on there and it would just stall out. After cleaning it, the problem still persists. Can a slipping clutch cause a slight hesitation when accelerating (in addition to the obvious slipping)?
  5. maximos

    Clutch Problem?

    I'm getting ready to go and clean my IAC in a little bit, but I figured I would give an update of something new I noticed today while driving to work. I gave it some gas to get around a car on the way to work and it just the engine rpm's just shot up and the car didn't go anywhere. On the way...
  6. maximos

    Removing cubby hole below stereo in dash?

    Pull out the radio. Push the tabs down. Pull out the unit. Done.
  7. maximos

    Clutch Problem?

    I haven't disconnected the IAC. If I drive with it disconnected and it drives fine, does that mean I need to clean my IAC/replace it?
  8. maximos

    Clutch Problem?

    I just discovered a new symptom...I was driving at a slow speed and let off the clutch to coast to a stop and the car just kept driving. It just held steady at 1800 rpm IN GEAR and basically drove itself. I'm really at a loss. HISSIN - I'll continue to search for leaks. Is it possible that...
  9. maximos

    Clutch Problem?

    I just cleaned the throttle body and the mass air and I'm still having the same problem. It's almost as if the the flywheel just keeps spinning because the clutch isn't stopping right away. Is this a possibility?
  10. maximos

    Cooling hoses

    +1
  11. maximos

    Cooling hoses

    You can buy a kit from Summit that has every hose you would need to replace. They're all pretty much right there in front of you when you look at the engine. Unless of course you are referring to hoses other than cooling hoses.
  12. maximos

    Clutch Problem?

    This just recently started happening. I haven't made any modifications to the car in about a year so something has to be out of sorts. I will clean the throttle body and check the mass air too. If anybody else has any thoughts, shoot them my way. Thanks
  13. maximos

    Clutch Problem?

    Initially I had thought this was an issue caused by a vacuum leak but after finding the vacuum leak and repairing it, the problem still persists. Whenever I come to a stop, my engine's RPMs will rise to about 1,800 and then drop back down to normal idle. I will go ahead and point out that this...
  14. maximos

    Help Me Find My Vacuum Leak

    WOW - It was right in front of my eyes the whole time. The smallest hole you could imagine in the line. Thanks for everything. This got me thinking about some things though. Not too long ago I made a post about exhaust coming through my vents. Could a hole (or multiple holes) in the vac...
  15. maximos

    Help Me Find My Vacuum Leak

    That's where I've been looking for a few days now. The hose looks great going into the vacuum tree. I will follow it and see if it shows anything else. Thanks for everything so far!
  16. maximos

    Help Me Find My Vacuum Leak

    I guess my biggest problem is that I don't know where vac tree is. From what I've read, the majority of vac lines are hidden in the fender. I've inspected the vac lines I can see in the engine bay, but I've only found one suspect on the passenger which, of course, leads into the fender...
  17. maximos

    Help Me Find My Vacuum Leak

    I'm not exactly sure I understand the reason behind this. Are you saying that WD-40 entering a vacuum line will cause the engine to raise it's RPMs - thus showing where the leak is?
  18. maximos

    Help Me Find My Vacuum Leak

    Symptoms started a couple weeks ago and are as follows: 1. AC mostly going through defroster vents, but will occasionally switch back to regular vents. 2. If I shift into neutral and coast to a stop the RPMs will hover around 1800rpm and eventually go down to normal. 3. When idling...
  19. maximos

    where can i find 94 95 bbk o/r h for LT headers

    The BBK O/R H-pipe for LTs has been discontinued through BBK. I believe Brothers Performance said they had about a dozen when I last spoke with them - unfortunately that was a little over a year ago. I think I remember one of the guys at Brothers saying they purchased all the inventory BBK had...
  20. maximos

    low coolant temp sensor

    Green Sales Company - Obsolete Ford parts, Lincoln, Mercury parts Green Sales Company, supplier of obsolete Ford parts and Lincoln / Mercury parts.  Our Ford parts inventory represents all Ford and Lincoln / Mercury products from 1950 to the present. All of their contact info can be found there.
Top Bottom
Back
Forums
Menu