Search results

  1. rusty428cj

    1968 DOHC 4.6 Coupe Project

    I ran out of room at the shop so I moved this to my house and started working on it again on the weekends. I had a hard time finding a master cylinder that would clear the cam cover and did a search on line and found this Bronco II master cylinder and it fits.
  2. rusty428cj

    1968 DOHC 4.6 Coupe Project

    Mustang to Fear dash pad came in a long time ago and is a very well made dash pad. Now if I can only get the wiring straightened out under the dash I can install it.
  3. rusty428cj

    Build Thread Vulcan 1968 Sohc Mustang

    Starting to fit the front apron The shape was wrong under the headlight buckets so we cut it apart and glassed it back together The spoiler was cut down and the front lip bonded back on. After sanding Bodywork to match the fender to the front apron After a lot of sanding and...
  4. rusty428cj

    1966 Mustang Coupe Restomod

    Brian started laying out the stripes on the body Five coats of clear wet sanded and buffed
  5. rusty428cj

    1969 Mach 1 Restoration

    Opentracker roller spring perches and suspension along with Wilwood brakes installed TCP rack and pinon Strange 9" rear Side view
  6. rusty428cj

    1969 Mach 1 Restoration

    A lot has happened since my last post. The doors have been wet sanded and buffed The body has been wet sanded and buffed Doors and deck lid have been installed Rear bumper, gas tank and cap installed
  7. rusty428cj

    1969 Mach 1 Restoration

    The body was wet sanded and is ready for 3 more coats of clear Brian wet sanded and finished buffing the deck lid
  8. rusty428cj

    1969 Mach 1 Restoration

    Thursday I sprayed 3 coats of ProSpray Acapulco blue Friday I sprayed 3 coats of SPI Universal clear After wet sanding the doors I sprayed 3 more coats of clear today
  9. rusty428cj

    Build Thread 1978 Mustang I I

    Brian finished buffing the fenders and hood and has them on the car. Waiting to finish the grille panel and front bumper.
  10. rusty428cj

    1969 Mach 1 Restoration

    Sorry I have forgotten to update The bottom of the car was tapped off getting ready for primer. Epoxy primed Hood and deck lid are painted with a couple of coats of clear Front valance and head light buckets painted Acapulco blue with 4 coats of SPI Universal Clear Inside the...
  11. rusty428cj

    Build Thread Vulcan 1968 Sohc Mustang

    We had to add fiberglass to the side exhaust skirts to give us something to bond to the pinch weld. Bonded to the rockers Started the bodywork Headlight bucket was bolted, bonded and fiberglassed to the fender Front fender flares installed Bodywork getting everything to line up...
  12. rusty428cj

    Build Thread Vulcan 1968 Sohc Mustang

    Quarter scoops were bolted and bonded with 3m8115 panel adhesive. Major bodywork finished on the rear of the body yesterday Today I sprayed two coats of SPI epoxy primer
  13. rusty428cj

    Build Thread Vulcan 1968 Sohc Mustang

    Quarter scoops were bolted and bonded with 3m8115 panel adhesive. Major bodywork finished on the rear of the body yesterday Today I sprayed two coats of SPI epoxy primer
  14. rusty428cj

    Build Thread Vulcan 1968 Sohc Mustang

    The end caps were bolted and bonded to the quarter panel I also added a little fiberglass Bodywork ruffed in We now have a nice tight gap around the rear bumper Epoxy primed Next step is to finish the bodywork on the taillight panel and rear valance
  15. rusty428cj

    Build Thread Vulcan 1968 Sohc Mustang

    We decided to install a roll bar and I bought a kit from S & W for a 1968 Mustang We wanted to do something different so we cut about 1" off the end caps and spoiler. As you can see in this photo the bumper needs to be narrowed I cut the center out of the bumper and lined up...
  16. rusty428cj

    1966 Mustang Coupe Restomod

    Today I sprayed a couple of coats of SPI Universal clear. The next step will be to wet sand and lay out the stripes and spray more clear.
  17. rusty428cj

    1966 Mustang Coupe Restomod

    Brian covering the engine compartment the other day getting it ready for pepper gray. Yesterday I sprayed 3 coats of ProSpray pepper gray
  18. rusty428cj

    1966 Mustang Coupe Restomod

    After sanding we found a couple of small imperfections I wasn't happy with so I fixed them and epoxy primed again. It will be ready for paint after a little wet sanding with 600.
  19. rusty428cj

    1966 Mustang Coupe Restomod

    Final taping before paint Epoxy primed
  20. rusty428cj

    Build Thread 1978 Mustang I I

    Brian finished wet sanding the fenders next week time for buffing.
Top Bottom
Back
Forums
Menu