Search results

  1. M

    What mild cam ?

    i have to disagree with some of the others a little... i do fell like you will see an increase by swaping the cam, granted the heads will only flow what they will flow and the stock cam is matched well, BUT if the cam you get has increased duration and revised valve timing, there are increases...
  2. M

    What mild cam ?

    thats funny! when i was looking for a cobra intake all i could find was the sn95 intakes... like the one pictured above.
  3. M

    What mild cam ?

    depending on your future plans, there is a nice "E" cam in the for sale section here.
  4. M

    Upper and lower GT40 Intake manifold (used)

    i must concur! ive had both intakes at different times, and even though the explorer intake is a fine intake, it would be a little better represented as a "poor man's cobra intake"
  5. M

    better way to jack up the car?

    lower torque box for me as well.
  6. M

    Will the EEC IV work without the 02 Senors?

    good deal, i wasnt sure if the noid was used.
  7. M

    head gaskets to raise compression?

    exactly... and i noticed you asked a question about pushrods in another thread... you will want to shave the heads before measuring for pushrods. oh, and shaolin, i corrected your statement to show what you actually ment. i hope no offense. :nice:
  8. M

    Will the EEC IV work without the 02 Senors?

    the injectors will have 12v all the time, they are grounded thru the ecu, completing the circuit on cycle. to check the injectors to see if they are cycling, i would get a noid light.
  9. M

    88 5.0 LX No Spark, No fuel pump

    as i read your post i suspected the TFI mod. then reading that info lo and behold there it was on the list of probabilities... "C", TFI module. it would be my first thing to check.
  10. M

    Will the EEC IV work without the 02 Senors?

    the car should start and run w/o the o2 sensors... it wont run correctly, but it should start.
  11. M

    lost fuse panel cover

    yeah i found the flasher for my turn signals, mine was behind theconsole by the radio on the pass side... thanks for the heads up on the switches, i was just on my way out to get a switch. :nice:
  12. M

    Show off your stang

    here my junk, please ignore the swingset... :nice:
  13. M

    Problem removing bellhousing

    x's 2, if the fly doesnt get turned and the seal replaced it isnt worth doing the job!
  14. M

    lost fuse panel cover

    i was wondering what came of this? i am having the same problem, flashers work fine, turn signals dont work at all, replaced the flasher still nothing...:shrug:
  15. M

    Black/Opal grey interior, Autometer stuff, misc.

    can i get some pics of the rear seat, may be interested in it, seat belts and floor mats. thanks in advance... mike. [email protected]
  16. M

    complete turbo kit fs foxbody

    how about some pics... does it retain the p/s and a/c?
  17. M

    back in business..

    well, ive been out of the mustang thing for about 5 years while i have building my broncoII rockcrawler... when i got it done and went on some rides i realized it was more like work than fun! i didnt like that, so i sold it and found a mustang i have a deal worked out on to buy, its a 90ish...
View older results
Top Bottom
Back
Forums
Menu