Search results

  1. F

    laptop guys

    try www.4allmemory.com I get my stuff from there its pretty good stuff and the tech support is pretty good the website has a software tool that tells you what RAM you have and how much more you can put in to max it out
  2. F

    Blew two alternators, what's the problem????

    Start checking fuses under the hood and under the dash I had a friend that had a very similiar problem with his mustang it was coming from the ignition switch these are notorious for causing all kinds of problems including charging problems the contacts get loose and some connections to power...
  3. F

    2.3L questions

    its pretty staight foward just unbolt the old one and bolt the other one back in good luck:nice:
  4. F

    Its the little moments that make it all worth it (ricer related)

    NICE I get that attention with my cobra as well and when you show them off a little bit the espression on their face is priceless:D
  5. F

    2.3L questions

    its on the side of the trasmission it has a vacuum line attached to it
  6. F

    2.3L questions

    thats a fairly common problem on the older ford trannies with vacuum modulators.They are cheap just get one from the auto parts store and it should cure the problem .I had changed a couple of them over the years for some friends with Ford minivans and trucks with the transmissions that used the...
  7. F

    HOW MUCH DID YOU PAY TO MOUNT AND BALANCE TIRES

    yeah you were about to get raped big time I paid 40 dollars for the same tires to get mounted and balanced at a mom and pop shop and they did a great job.
  8. F

    Overheating...

    it sounds like a gasket is on backwards either the headgasket or a intake gasket IF this started to happen after the gasket installs.Or your cooling system has alot of air still in it.
  9. F

    Summit Racing 70mm TB

    I have the bbk 70mm on my cobra with no problems
  10. F

    Need help with electrical (blowing fuses)

    I believe that connector you are talking about just hangs there I just took out my airbags and I'm pretty sure I saw a connector just sitting there with no other connections I could be wrong.ALso check if its not the airbag connector
  11. F

    Damn cooling fan plug!!!

    if it keeps doing that it means that the motor is sucking more amperage as they get older they tend to do that especially since its dual speed.If its the original fan motor they were recalled due to seized bearings and that caused the pigtail to burn since it was getting too much amperage thats...
  12. F

    AC problems at pressure cut-off switch

    yeah that part goes out just get it at the autoparts store and its called the low pressure switch for the A/C
  13. F

    Overheating now that I am in Arizona

    Do you have the stock gauges or aftermarket gauges. 240 is high do you smell antifreeze or hear it bubbling out from the reservoir when it reaches this temp .I have the summit radiator and I live in the high desert in california and my temp doesnt go over 195 with the ac on since I installed the...
  14. F

    MAC Direct Replacement Headers

    I have them on my cobra they work great
  15. F

    Tire Wobble

    thats got to be a bent axel for sure if you drive it much longer you will warp the rotor and mess up the wheel bearings more. get it taken care of before it damages more stuff in the axel housing
  16. F

    Antifreeze Problem

    also check the thermostat housing it might be leaking from there as well
  17. F

    Reverse Flowmaster...

    check the front of the muffler to see if it says inlet on one of them the letters will face up and the other will face down
  18. F

    Radiator Fan

    the oem fan is really better than most aftermarket fans out there they have two speeds on it and they last longer because they have dual coils inside for the two speeds.I have mine set to run at high speed with a aftermarket fan controller for three years with no problems with the original fan
  19. F

    Gauge Cluster

    it will bolt on but the wring is totally different you would need to rewire the cluster hardness
  20. F

    FPR info...

    Kirban all the way I had mine for 3 years no problems
View older results
Top Bottom
Back
Forums
Menu