Search results

  1. M

    Which speedo gear w/ AOD/3.73s

    23 tooth gear is what your looking for. :D
  2. M

    Msd distributor ?

    Don't waste your money, stock one is just as good, spend that money somewere else on your car.
  3. M

    How to fix drivers seat?

    Heres some info that might help: I don't know if you're describing the same problem, but basically, for taking apart the back of the seat it's not too bad. You'll need to pull the seat out of the car (4 bolts - possibly an electric connector). Then unzip the back of the seat and you'll need...
  4. M

    speedometer gear.. 3.73??

    23 tooth gear.I think BBK makes them.
  5. M

    Fuel pressure

    With these mods what should my fuel pressure be set at: :shrug: RPM heads and RPM intake 2040 crane cam 1.6 RR ARP head bolts BBK CAI 70mm TB and EGR and 73mm mass air 24 tube 24# injecters MSD dig 6 wires and cap March under pullies Double roller timing chain FMS roller lifters 190...
  6. M

    when buying a throttle body does the brand really madder??

    I had an Accufab and the plate screw fell off and my motor went for a **** :mad: . I've been using a P.P 70mm for a year now and no problem what so ever.Accufab is a real ****ty company to deal with, they cost me $1800.00 bucks :notnice:Also the Accufab whissled like cazy, P.P no whissle.
  7. M

    AOD w/ non lock-up 2800 stall: where should it be shifting?

    I have a 3000 9.5" non lock and it shift like this (leaving it in drive and it shifting on its own): At normal take off 1 to 2 is 4200rpm and 2 to 3 is 5000 rpm At WOT 1 to 2 5500 rpm and 2 to3 6000 rpm. You should shift higher , is your tranny oil level correct ?? Do you have a shift kit...
  8. M

    BBK O/R H pipes suck!

    Get it welded together or atleast tack it.
  9. M

    Beeping sound..

    Yup............if not satified being the beeping sound bring it back.
  10. M

    Any benefit of removing smog equipment?

    If your doing all that stuff H/I do the cam to. Take it off (smog crap) makes the engine bay look much better.
  11. M

    Gears

    I have an AOD and 3:73 are great...............but also have 3000 stall and shift kit. 3:73 good all round gear.
  12. M

    92 vert, auto, what can i do for lil more power

    2:73 or 3:08 ....3:73 are a good all around gear
  13. M

    92 vert, auto, what can i do for lil more power

    I would stick to 3:73 , cause if you go with 4:10 the only way you will get good 1/4 mile times would be with slicks. Regular tires with 4:10 you will just spin spin spin. People out here went from 3:73 to 4:10 and had a slower 1/4 mile time because of tire spin. Remember this is JMO.
  14. M

    92 vert, auto, what can i do for lil more power

    What i did with my 1990 vert was : 3:73 gears 3000 9.5" non locking stall and shift kit Edelbrock RPM heads and intake ported and polished and matched crane 2040 cam 1.6 RR 70mmTB and EGR 73mm MAF BBK CAI 24 lbs injectors underdrive pulleys MSD digitail 6 8.5 wires and blaster coil...
  15. M

    Please read! You Need To know this!!!

    I put Edelbrock RPM heads and intake with the crane 1.6 energizer RR and crane 2040 cam on last week and they fit perfect. Been running this set up for 200 miles took off the valve covers yesterday checked for the problem you are taking about and everything is centered and lined up perfect and...
  16. M

    Questions about torque converters

    Call Darrel at TCS in Langley B.C (604)533-8675 or toll free at 1-800-960-1177, tell him your mods and he'll tell you what Torque Conv will suit your needs. I'll be running a 9.5 non lock 3000 stall and my HP rating is 375 hp and 475hp on the bottle.
  17. M

    Speedo gear ????

    AOD,3:73 gears and 16" wheels, what speedo gear do i need to get my speedometer back to normal. myroc
  18. M

    Console shifters

    But its got to be better then the stock shifter, you would think :shrug: . myroc
  19. M

    Console shifters

    What aftermarket shifter (interior console shifter) will fit in the stock console with out hacking it up. Does B&M make one ??? myroc
  20. M

    Valve Covers

    I'm using a Edelbrock RPM intake and i was wondering what valve cover will fit under the over hanging pellium (spl??).Also using Edelbrock RPM heads if that helps.Looking for chrome valve covers.Picture would be great. myroc
Top Bottom
Back
Forums
Menu