Search results

  1. baldy1

    Few issues with new clutch (Hissin and friends comeon it)

    I am glad that they are returning your money. Take it to a real trans shop and they will fix right or they should. Never seen a cop in a 5.0 around here. disturbed where are you around here in portsmouth. Portsmouth is to cheap to buy a real cop car LOL
  2. baldy1

    double tranny swap 5sp to auto and back

    No need to do a puter swap because the auto is an AOD non electronic. Just pull trans out of one then do the other and swap flywheels and backing plates (plate between motor and trans) Crossmembers will be the same. Keep the driveshafts with the trans. Swap out both pedal assemblies out and...
  3. baldy1

    T5Z wiring question for AOD swap

    http://www.veryuseful.com/mustang/tech/engine/ You have four wires that go to a plug that was the Nuetral safety switch for your AOD.2 are for reverse light the other two are for nuetral safety switch Use the site above for wiring diagram
  4. baldy1

    No right hand turn signal?

    Change the right front turn signal bulb. It a two element bulb
  5. baldy1

    slipping clutch

    If you do the e brake test put the trans in 3rd gear.
  6. baldy1

    Someone school me on Speed Density...

    http://fordfuelinjection.com go to that site and you will learn a alot about EFI it is a very good site.
  7. baldy1

    Few issues with new clutch (Hissin and friends comeon it)

    Go and buy the clutch kit and take it to them and have them install it at no charge.
  8. baldy1

    Few issues with new clutch (Hissin and friends comeon it)

    Part No. MU472831 That is the part number for an 84. Both carb and FI. It takes the same clutch. That is a 10in clutch kit. I am sorry but they cant rebuild you pressure plate. Shops like that make honest techs such as myself look real bad. I hate that. Go buy the clutch kit yourself and take...
  9. baldy1

    Few issues with new clutch (Hissin and friends comeon it)

    Is your car an 88. I have an 87. They only offer a 10.5 clutch. Not a 10 or 11. that is only for the F-150's. Mustangs only have a 10.5 Part No. MU481M That is a part number for the kit. Its at Advance autoParts. Dont know if thats around where you are.
  10. baldy1

    Few issues with new clutch (Hissin and friends comeon it)

    If they didnt put the throw out bearing on the fork right would also cause your problem. Man they are pulling your chain. I am a tranmission tech. Been one for 12 years. On the clutch fork there is two metal tabs. If they didnt put the part of the bearing behind both of the metal tabs that will...
  11. baldy1

    Possible wiring problems???

    It smells like gas cause it not firing. Have you tried another plug. Aslo what color is the spark. I have seen a plug wire spark but if you do a resistance check on the plug wire its bad. I cant remember what its supposed to be but I would check that first.
  12. baldy1

    Aod problem maybe?

    It almost sounds like your shifter is out of adjustment. The reason why I say this is because you said that when u tried to back up it wouldnt then u moved the shifter to neutral then back into reverse then it backed up. Aslo you said the you couldnt get to it to go in park. You had to move it...
  13. baldy1

    passenger side window problems

    More than likely yes.
  14. baldy1

    where in the he11 is it??

    look overtop of the fuse panel. It could be there. Or look behind the glove box. It is not in the fuse panel. It will sit over top of the fuse panel
  15. baldy1

    starter and flwheel issues...

    Is the spacerplate in between the motor and trans their.
  16. baldy1

    Aod problem maybe?

    First the TC wouldnt cause any of your problems. This what I want you to do. Start your car put it in reverse. You will fell it it engage. Powerbrake it a little. Just quick litlle taps on accel pedal with your other foot on brake of coarse. Then put it in OD and do the same. Dont give it any...
  17. baldy1

    hazards work but turn signals dont

    The hazard and turn signal flasher is seperate. The turn sig flasher is above the fuse panel. The hazard flasher is in the fuse panel
  18. baldy1

    Is My 88gt AOD or ???

    Ding Ding your right RYC. AOD is hydrualic. Its not computer controlled. Its all done with a TV cable and the governor in the trans. Its a direct swap. Pull your out and put the other on in. No MODS needed. Get r done LOL
  19. baldy1

    Wiring Question again.

    Thank you. You are the man jrichker. I was waiting on you.
  20. baldy1

    Wiring Question again.

    I got the 93 EFI main wiring harness.My car is an 87. Here is my question. The 8 pin brown connector on the drivers side by the srt tower. I have figure out where 3 wires go to. Can anybody help to figure out where the other 5 go to. I have looked at wiring diagrams and cant figure it out...
Top Bottom
Back
Forums
Menu