Search results

  1. SScott

    smoothing engine bay

    Looks good Kris!
  2. SScott

    Car wont rev passed 1200 rpm without backfire!!!

    Agreed, check the timing. I switched a plug wire on accident and the same happened to me. Also, make sure you are using the HO firing order if you have a roller.
  3. SScott

    EFI to carb on my '87 GT NEED HELP

    Not just an adjustable fuel pressure regulator, it MUST be a bypass regulator, been there and messed that up. Or, you can drop the tank, and bypass the pump, that is easy to do, just make sure you get another screen. There a a bunch $$$ of reasons to go carb, if you want to go fast. If you are...
  4. SScott

    ***NEED HELP WITH MY ENGINE PACKAGE!!!***

    agreed
  5. SScott

    Gotta love dirtbag mechanics

    That's messed up. Shop has to be either stupid or thieves...
  6. SScott

    AOD or AOD parts for sale or trade

    ALL SOLD - THANKS AOD was in my 86 mustang when I bought it about 5 years ago. Dude said it was new then but I have no idea. It has a stock looking converter and block plate. I installed a B&M shifter arm so you can run a shifter and I also installed a Baumann shift kit and boost valve and B&M...
  7. SScott

    Help on new slicks

    Got any pics? I would like to see how it looks.
  8. SScott

    1990 5.0 wiring help

    There is a yellow wire that branches off to 3 or 4 black wires with a fusible link that provides power to the car, I am sure it is not that one. What are spark issues? Have you done a tune up on it? Are the plug wires arching? How do the cap and rotor look? Hows the timing? Check the coil? I...
  9. SScott

    Leaking Yoke, take a look:

    Thanks a bajillion! I will pull it back out in a bit and see what I can come up with. It must have vibrated off in my other car?
  10. SScott

    Leaking Yoke, take a look:

    Hello and thanks in advance. My tranny leaks from the yoke like a stuck pig since the install. Please look at this pic, it is a random one from the internet on a mustang. The yoke in this picture has a freeze plug in it, my yoke has nothing, you can see the splines. Is that what is wrong...
  11. SScott

    Can't adjust out enough camber...

    Good to know! Thanks to everyone, I will let you know how it goes,
  12. SScott

    How much power will my trans hold? EFI to carb conversion

    If you are just doing "head work" and an intake, it should be fine. It depends on how you drive. I was curious about the same thing. I can quote the numbers all over the internet like everyone else but instead I have asked several racers who have stock T5's and the response I get is always...
  13. SScott

    converting to carb,will stock throttle cable work and what bracket?

    I used the braided universal from Autozone and a moroso plate under the carb.
  14. SScott

    Will Paxton SN60 Supercharger work?

    Someone else asked this and it seemed to ruffle feathers for some reason??? In short, yes, it will work. The real question as far as how much boost is in the engine setup. The way to adjust the boost on a SC is pulley chages but it can be done with a boost controller and wastegate at least...
  15. SScott

    aod-t5 swap

    Sounds like a good deal if the tranny is good. You need: flywheel with bolts, clutch and PP w/ bolts, arm, TO bearing, pilot bearing, block plate, pedals w/ quadrant, cable, CSS, bell and shifter and the floor boot. I think this is all? I just did it my self. You will also need the harness if...
  16. SScott

    Can't adjust out enough camber...

    AWESOME! Thanks dude, I was wanting to hear that someone else experienced this and had a resolution. I really wanted to simply open up the strut tower hole about a 1/2" but did not want to do anything that would decrease the strength or make the car worth less. Your car is bad arse and MM knows...
  17. SScott

    Can't adjust out enough camber...

    Yes, I tried that, it didn't work out so well, there is still room to travel in the slots, it is the bearing retainer in the CC plate hitting the strut tower hole that limits the adjustment. stang&2Birds, thanks! I am pretty sure it is the factory K-Member but I will check. Is veryuseful.com...
  18. SScott

    MAC? equal length shorties?

    There is a guy on YB with a set of long tubes I think for $100 if that doesn't pan out.
  19. SScott

    Can't adjust out enough camber...

    It is a 91 LX 5.0. Stock a arms, new rack and tie rods, steeda cc plates, 4 cyl springs w/ 1/4 coil cut from 86, bottom isolators removed and no sway bar. Mac LCA out back, sub frames, drive shaft safety loop, 8.8 w/ 4.10 and I now believe a spool. I loosened the CC plates up all the way and...
  20. SScott

    87-93 dash swap

    If I can remember right, I had to bend the tabs down by the windshield and use the nylon inserts, everything else bolted the same. Just be careful by the windshield, I almost broke mine. The console will bolt up just fine.
Top Bottom
Back
Forums
Menu