Search results

  1. Ourobos

    Speedometer cable

    Yeah, you need to remove the electronics for sure, as it's hard to thread the cable in through the firewall without seeing where it's and and where it's going. You can get away with undoing only the headlight switch and foglights and leave the hazard/defrost attached and swing the bezel over to...
  2. Ourobos

    How hard is it to replace door lock motor?

    You can buy the actuators for like $20 on the internet. Then you drill the stock riveted ones out, and drill two hole in the inner panel for the new ones. They are nice pieces, and work strong. Mine have been going for over two years without a hitch.
  3. Ourobos

    Easiest way to change power steering fluid?

    About a quart, slightly less.
  4. Ourobos

    Got a question for the engine builders

    Heh..$700.. New main/rod bearings, new rings, new gaskets.. $200.. hone it yourself.. Reuse STD pistons.. Wha la.. Overkill is overkill
  5. Ourobos

    wrapping spark plug wires

    I had a set that the boot melted on (even and L boot shape) because of the euqal lengths (MAC Grr.). It would make my car stumble. I took a think walled piece of pipe and stuck the plug in it then connected it. No problems, no expensive header wrap for a 2" job.
  6. Ourobos

    1990 Mustang GT Rebuild ~ Need a little advice

    It's cake to change the cam, just be careful and slow so not to nick the bearings, and put the new one in EXACTLY the same orientation as the stock one. You should be good with 19# injectors for up to 320 HP.
  7. Ourobos

    Whats wrong with my clutch?

    Also you may have stretch your cable when you slapped it into 2nd. Go with a FACTORY adjustable cable, aftermarket ones stretch even easier.
  8. Ourobos

    How hard is it to replace 5.0 badge?

    Take a piece of fishing line, and loop it under the end of the emblem. If you want to save the emblem, GENTLY work it toward the other end, otherwise just peel that puppy off. Here's mine with no badges : www.circlecfarm.com/ourobos.htm
  9. Ourobos

    1990 Mustang GT Rebuild ~ Need a little advice

    Instead of the parts you chose, have you looked into the Trick Flow engine package? It is a set of Twisted Wedge heads, a Stage 1 cam, and their Street Heat intake. I have seen it for $1600. Much more likely to hit 300 with it than the package you mentioned. You may also want to look into...
  10. Ourobos

    New motor gone south? *SICK STOMACH*

    How old are the springs on your combo? Did you upgrade your cam when you rebuilt it? I had the same thing happen to some GT40 heads 3 times. I thought I was slapping a piston, but turned out I needed new valve springs. Solved all my problems (before I broke a rod anyways). I also use allen...
  11. Ourobos

    chrome headers ?? $100 shipped

    I bought some BBK Equal lengths in the classifieds for $50. Should always shop around a bit, unless that money is burning a hole in your pocket. Good luck.
  12. Ourobos

    1993 mustang vaccum diagrams

    http://www.veryuseful.com/mustang/tech/engine#Diagrams
  13. Ourobos

    fixed a header leak...now i have a problem

    Metal side goes toward the head is what I've always heard.
  14. Ourobos

    new wire harness

    Make sure you get a 92-93 harness (if you get a used one) as they differ from 91-earlier. What caused it?
  15. Ourobos

    Mustang header's from ebay??? $95 shipped

    Wow.. since when is S N A T C H E D a foul word?
  16. Ourobos

    Mustang header's from ebay??? $95 shipped

    Looks like some thin material they are made of. Looks like stock, except 1 5/8 primaries. I ******ed some BBK 1 5/8 equal length on the forums for $50. Shop around.
  17. Ourobos

    new wire harness

    you can see my engine pics where the fuel rail came loose, and went ablaze. Put it out in about 30-45 seconds. I only had to replace injector harness, o2 harness, throttle/cruise cable. Ran great for about 2 months. Then my TPS quit working. after chasing the leads down, i determined the...
  18. Ourobos

    My Car was Wrecked im parting it out.

    That got harsh, and suddenly.
  19. Ourobos

    best carbon cleaning method

    I disassembled my heads, and took all the valves to a wire wheel. Looked brand new.
  20. Ourobos

    Help with Mac long tube headers

    You can get the older style MACs that the shaft doesn't go between primaries. Mine fit great.
Top Bottom
Back
Forums
Menu