Search results

  1. BarnStang

    1970 Mach1 Ignition Problems?

    Can't find that thread where I posted the pictures and info and part numbers, but here s a link to an article that shows the differences: How-To: Replace '65-'73 Mustang Ignition Switches Geeze, had to use Google to find it...
  2. BarnStang

    1970 Mach1 Ignition Problems?

    Thats the lock cylinder, the switch on a 70 is mounted on the column. THe Echlin switch you get from the parts stores say they are for a 70, and will work fine, but you need to cut the plug off and splice on the plug from the old switch. There should be some old posts about this. THe test you...
  3. BarnStang

    new brake lines dual master cylinder

    What type of front disc kit did you get? You can order prebent lines easist for the K-H original disc brake kit and they should fit at the wheels well-I think you will need to relocate the brackets which is not a huge deal to do. You can order prebent for drums and the left and right front...
  4. BarnStang

    Drum to Disc brake conversion

    Welcome to CSRP
  5. BarnStang

    Frame chart

    Finaly found the site that has the large copies in 11x17 Mustang Frame and Floor Reconstruction by Mid County Classic Mustang I could still use a picture of the 68 frame chart if anyone has one, untill I get one ordered.
  6. BarnStang

    Frame chart

    I have been looking for the frame charts for awhile. Have seen links on here before, and have come accross vendors who sell the 11x16 laminated copy...founds Petes Auto Data. Anyone have a frame chart for a 68? Or a link to one...Thanks
  7. BarnStang

    '72 Idiot to Tach Swap

    Here is a write up I had in my docs library that may work for you as well.
  8. BarnStang

    any body ever try this company and disc brake kit?

    Welcome to CSRP
  9. BarnStang

    Drilling for Shelby drop

    Hmmm, the writeup at Dazecars says to drill in steps...so there ya go. Either way should work ok. You would just need to check the fit with the UCA to make sure you get a good fit. If you have the template then you are pretty assurred of getting it right.
  10. BarnStang

    Drilling for Shelby drop

    Here is a source for the template and drill bits. It would be more accurate to drill the pilot hole and the final size. DazeCars, Shelby Drop, Klaus Arning drop, upper control arm drop, Falcon, Mustang, Cougar 60-70
  11. BarnStang

    Who sells oil pan with OEM sytle 1/2 - 20 drain plug

    We've used thes guys products several times. Check them out. You can have them make a custome pan so you can get a drain any size you want. Stef's Affordable Oil Pans
  12. BarnStang

    Advise on 3 speed manual upgrade

    I have a 3 spd trans that came out of my latest project. Already got a toploader 4 spd for it so you are welcome to the 3 spd if you cover the shipping if you want it. Or pick it up at zip 21740 Is buried behind the car right now. But can dig it out to check what it is exactly if you're...
  13. BarnStang

    Unisteer is offering $250 off their power

    Exactly. No mini starter. That stock starter cleared fine. Not too thrilled with how the P/S lines have to be routed. THink they could have put 45 degree fittings on the rack or something. But this car has stock manifolds so not going to sweat it with this one too much. Pleanty of room once I...
  14. BarnStang

    Unisteer is offering $250 off their power

    Ran into the same problem today with the install. The instructions say that the fittings are pre installed on the rack, but they wern't, the adapter fitting was screwed into the line. I had to call Unisteer to clarify which port on the rack is the pressure port. (Lower port) If they had...
  15. BarnStang

    Unisteer is offering $250 off their power

    Unisteer Performance Products Click "Promotions and Special Offers" Code is 09M250 power and 09M200 for manual They delayed putting the offer up nov 1st cause they didn't have all the parts on hand to complete the kits (per the sales rep) Should be good to go now. I see it's up on the...
  16. BarnStang

    Need HELP! Have a mystery part from my 66

    I think there is some type of bearing, been awhile since I had one apart too, but this little part cinches the spear to the bearing(?) in the center so the steering column can be removed. It usually dosen't fall out. I'd have to look at it. Can't remember exactly whats in there, but the part...
  17. BarnStang

    Need HELP! Have a mystery part from my 66

    Once your steering column is in place, that slides over the shaft to center the shaft at the top. Your's is an original metal one, here is the replacement reproduction part: STEERING COLUMN BEARING SLEEVE 1964-1967 - CJ Pony Parts, Inc. Oh, yes, it should be split...
  18. BarnStang

    rear drum brake backing plates

    SOmeone may be able to clarify this but I think you can get the 2 1/2" backing plates off some trucks and vans but don't know which. Also some large full size Ford cars too. Hopefully someone has a list of applications?
  19. BarnStang

    Rack and Pinion Options

    I thought the unisteer rack DID also suffer from a loss of turning radius...I looked around the site but could not find any reference to turning radius for the 66 mustang kit. We are getting ready to order one of these racks for a customer's car. Would be great to confirm this. Also, I spoke...
  20. BarnStang

    98 Cobra battery drain

    Amazingly, we weren't waiting long enough. After an hour we went back out and checked again-dropped to 20 milliamps. Opened a door and back up to 80, another hour, back to 20. So all the modules are going to sleep as designed. Top of the battery is clean. After speaking with the counter rep at...
Top Bottom
Back
Forums
Menu