Search results

  1. bud4660

    Bouncing Speedometer

    Try this first and also look to be sure the cable housing is not bent or kinked. If this doesnt fix it then look at the gear to be sure its not chewing itself up. If all that looks good. Then I would say you will need a speedo head. Bud
  2. bud4660

    Maybe a cool idea?.. Submarined Antenna

    Just go ahead and french the thing if your going to do that much work. :D
  3. bud4660

    8 or 9 inch posi finder help- guru's?

    If the 8.8 is out of a mustang it is going to cost more to use that in an older car. First it wasnt set up for leaf springs. Then you need to get the axle tubes welded into the center section so they dont pull out. If your going to race with it you will need to do C-clip eliminators and bigger...
  4. bud4660

    Wire organization.

    Here's mine for now. I am going to redo all the wiring when I get done rebuilding the motor.
  5. bud4660

    Diamondplate in the trunk

    Might also look at those tailgate protectors for the inside of the tailgate on pickup trucks. I picked up a couple of those and cut them up for things. Diamond plate is high dollar stuff in alum. :nonono:
  6. bud4660

    Mc and brake booster Boys I need your help.

    Any of the Mustang parts places will have them. The parts shopper on this site at the top of the page. Here's another one. http://www.npdlink.com/
  7. bud4660

    Front suspension rebuild

    Thanks Jay. I will let you know!! Also checked out the site. :nice:
  8. bud4660

    BRAKES - the final frontier

    I have been looking at these to use on my 67. It has the factory four piston type on it now. These looked alot easier to deal with?? lol http://store.cal-mustang.com/cm_able/showprod.cfm?&DID=7&CATID=19&ObjectGroup_ID=192
  9. bud4660

    Front suspension rebuild

    So they are all junk then?? I had found some new nos ones listed on one of the sites. But your right the price was almost as high as the tubular ones. Also found the stock type already boxed. And they were high too. Since this is a big block car that is going to pull the wheels on the line I was...
  10. bud4660

    Front suspension rebuild

    This is the thing I am wondering about?? "Beware of some of the imported arms as they can be quite thin." I dont plan on going road racing but I am planing on drag racing. The last thing I want is to have a control arm or tie rod break. How do you know what your getting from the Mustang part...
  11. bud4660

    Battery Relocation

    Depending on tech you might need one of those sealed battery boxes. I havent checked into that just yet. I plan on running an Optima battery so I dont know how the rules go on that?? You can see in the picture that my cutoff is just mounted in the rear panel. The spot about half way up on the...
  12. bud4660

    I have 3.75 gears...is this too much???

    68DARKHORSE is correct on the overdrive. My old 67GT 428 toploader in the 70's I had I ran 3:89 gears in if I remember right. It depends on what you want for top speed. I dont drive over 70mph much on the roads. Now on the drag strip is another story.... :D
  13. bud4660

    I have 3.75 gears...is this too much???

    I put 3:73's in the 98GT I just sold. Everybody was like put 4:10's in it. It was an automatic so I felt 3:73's were enought. And they were. I have 4:10's in my 96 F250 Crewcab truck. Its a 460 with a 5 speed and other then then it gets 10mpg its ok on the highway. The 67GT I have now has 4:56...
  14. bud4660

    67 Brake Diagram Request

    Thats the way my non-power disc setup is plumbed. Mine was a factory disc brake car. Someone took the power booster off and hooked it that way. The brakes feel really soft. I havent drove it other then from the trailer to the garage. But the guy I got it from drove it this way for 11 years...
  15. bud4660

    67 Brake Diagram Request

    I think someone plumbed mine all wrong. They hooked the rear brakes straight into the rear of the m/c and the fronts go into the line lock off the front of the m/c then tee to the wheels. No block. No adjustable valve. No nothing. He said the brakes were acting funny?? Wonder why?? :nonono: lol
  16. bud4660

    Minitub ?'s

    I would say it depends on how wide you want the tubs to be. I have about 20" between mine. This picture is not very good. I am in the process of redoing the carpet and all the inside right now. So this is a before shot.
  17. bud4660

    any have any pics of a 68 with 15x10 wheels on the back?

    Seems like I read somewhere that 4.25 was the most offset that would clear?? I think mine are 15" wide?? But its been tubbed. Havent measured them yet to see. But the tires are 19.5 wide. :nonono:
  18. bud4660

    stock radio what size fuse?

    I am not sure on the size you need. But I would guess a 10 or 15 amp should be fine for the radio. If the fuse keeps blowing then you either have a bigger amp load then the fuse your using or a short. Might have a hot wire that is shorted to something metal and blowing it. Hope that made sense...
  19. bud4660

    Any Trouble With Ron Performance Not Returning Calls?

    I just did a search on Yahoo for his business. This is what came up. ron morris performance ... Allow up to 7 days for reply. Ron Morris Performance Has Moved!! but just down the building to Suite F. We have twice the space! ... About Ron Morris Performance. ... :shrug:
  20. bud4660

    LH dash vent on a 67.

    Great. Something else thats missing....lol.... Thanks!!!! Guess I need to find one of those now.... :bang: But it has a fog light switch that works now!!! :D
View older results
Top Bottom
Back
Forums
Menu