Search results

  1. 1

    Where can a find a 24# sample tube, for C&L meter?

    I remember seeing them @ brothers performance heres a link http://www.brothersperformance.com/shop/mustang/c&l8a001022.html
  2. 1

    how many times can you reuse stock head bolts?

    What if someone has already swapped head bolts out of that car before?? why take the chance this really shouldnt even be a discussion buy some new Head Bolts (ARP) And save your self the worry,And time of having to do it all over again if they fail. "if your going to do something,Do it right...
  3. 1

    ENGINE BUILDER SAYS i BETTER DO THIS!!

    Same here stay with the 7/16 im ruuning the ARP's read sig.
  4. 1

    Head Gasket

    Im looking for a head Gasket to fit Back on my engine the only numbers i found on the old Head Gasket were 54115 G ive called around and nobody seems to be able to pull this number up its a victor reinz gasket but i just need a headgasket for a 302 bored .030 and needs to be .050 thick.If you...
  5. 1

    E7TE Head??...They say E7TE

    Because of the info i discoverd on this topic http://forums.stangnet.com/showthread.php?t=412726
  6. 1

    E7TE Head??...They say E7TE

    yeah for the Most part except i have to run P headers...i dont want to be limited on headers.
  7. 1

    E7TE Head??...They say E7TE

    Nah ill just take my E7TE off my other 302 motor sitting in the shop.I want to see how much HP i can make with an all most stock looking 302 from the outside :)
  8. 1

    Hey Thumper460 read here

    Also anyone wanting there Engine Ran on Performance trends Engine Analyzer can send me a PM with you specs or post them on this thread. Heres a run down of what i need. Engine info: type of Engine:302,306,331 etc etc Bore size stroke #of cylinder if other than a V8 What Rods and length...
  9. 1

    Hey Thumper460 read here

    Lets Put it this way my Dad had his just had his 331 stroker with Windsor Jr Heads that are lightly Ported,was just Dyno's by Boyds Machine and Performance shop it Dynod 385HP@6500RPMS and 361ftlbstq@4500rpms I ran his specs in Engine analyzer and it came out almost Identical it said...
  10. 1

    3core rad from autozone yay or nay?

    Im running an Autozone 3core its a good budget radiator i installed mine with this motor and i hardly every have to turn on my electric fan and my CSI electric water pump flows and cools much better it flowed to fast for my 2core to cool the coolant.A 2 core is smaller holds less coolant so your...
  11. 1

    E7TE Head??...They say E7TE

    I just Pulled My Heads off my Motor and Found that they dont have the thermactor Bumps and they have never been touched Complete visible rough casting completely through heads just they were the day they left the factory so what gives?? Also i found 2 Valve Guides cracked inside the Intake...
  12. 1

    Hey Thumper460 read here

    If you want Private Message me with what your wanting to build with all the specs and i will run it and give you the results...Be extremely detailed...if i need anything that you forgot ill message you back.
  13. 1

    Hey Thumper460 read here

    Well what impresses me the Most is the fact its theoretically possible for my engine to make more HP with stock ported heads with stock valves than Bolting on a set of Bigger Windsor Jr head with Bigger Valves (18HP more over the HP gains from the Windsor jrs) Just through Effeciency and Air...
  14. 1

    What upper/lower control arms do you like?

    Ive got SSM and really like them.
  15. 1

    whats wrong with my drivetrain?

    Look up into your Bellhousing near clutch fork and see what the clutch looks like...sounds kinda like a busted clutch also.
  16. 1

    T-5 to AOD swap

    Ok i read somewhere that you have to make sure to have that aluminum dust cover plate installed because it has to do with clearences,but is the one for an AOD different than T-5?
  17. 1

    Car's been using alot of water. (long)

    Pull your Valve cover and see if theres any white milky oil in the tops of them,sounds like you may have a very small leak at the head gasket,small enough it doesnt really effect performance and it just steams the water away and it never makes it to oil pan.Also you can buy stuff to pour into...
  18. 1

    T-5 to AOD swap

    SO i guess thats really all im gonna need?
  19. 1

    Hey Thumper460 read here

    Yes You have to enter in every Single Little detail for Block,heads,Intake,Exhaust,Cam/valve train,Supercharger and Nitrous if applicable,Down to what the temperature is outside the humidity dewpoint what octane gas your running,your timing etc.and its a great program but its not made for those...
  20. 1

    pull engine and tranny together?

    what intake you have on it? I just used the bolt from alt bracket
Top Bottom
Back
Forums
Menu