Search results

  1. 4dStang

    Would gears require changes to Speedo?

    Funny, Here is what steeda says. I swear I put in a 23 tooth. Maybe it was a 21 tooth. 2.73 Gear Ratio / Maroon 16 Speedo Gear $9.95 3.08 Gear Ratio / Yellow 18 Speedo Gear $9.95 3.27 Gear Ratio / Pink 19 Speedo Gear $9.95 3.55 Gear Ratio / Black 20 Speedo Gear $9.95...
  2. 4dStang

    Would gears require changes to Speedo?

    I have 3.73's in my car (formerly 2.73's) and used the 23 tooth from steeda. The MPH is off by seven. I just keep in mind that when I want to go thirty, I go 37. People sure get pissed off at me when I drive like 23 in a 30 cause I forget! But if your Mustang (not cobra) came with...
  3. 4dStang

    mustang wont start

    You say there is no pwer to the coil. Does that mean the car cranks but won't catch? We need more info to help. :D
  4. 4dStang

    Need help getting glue from tint off my windows

    I would mention the laquer thinner but if you get ONE drop on the door panel it is ruined. It works great, but wouldnt a heat gun and some soapy water do something with a plstic spatula, especially for the rear window. I just got a heat gun and it takes anything sticky off if done right.
  5. 4dStang

    Tremec TR-3550 install

    A 1995 Cobra R bell housing is the proper bell for the TKO 3550. As far as I know, the 3550 does NOT come with a shifter as the TKO500/600 do, so you'll need a shifter. Do the grind on the mount and you will have to measure, after the install to see if your drive shaft length fits correctly...
  6. 4dStang

    Problem with aode to t-5 swap, need help?

    The bell housing and the tranny MUST be the same. If your driving SN-95 you REALLY should use the same tranny and bellhousing because of input shaft lenght and the problem you have. Too bad you have to take that tranny out again. Mines been out twice in two weeks for a bad bearing retainer...
  7. 4dStang

    Two clutch cables went bad on me. What's going on here?

    I went through two cables before I figured out that my equal length headers were just a little too close and were causing the plastic to melt into the cable causing it to get harder and harder to push on the clutch. I would replace the cable before it broke though because I hate getting...
  8. 4dStang

    Find me a one piece H-pipe that doesn't suck

    I did not want cats. just straight pipes. :rolleyes: I don't know if the BBK non-cat is one piece. I may just take my prochamber off when I get the Mustang back from the body shop and put cats on it. I plan on selling it anyway. Then I wouldn't have to buy anything. But, it may be...
  9. 4dStang

    Find me a one piece H-pipe that doesn't suck

    I'll try that. I just want some one who LIKES their pipe to tell me a good one. I have had the cheap pace setter and the crossover never met up. I have also still have (on the stang) a Mac prochamber which is better but I don't like the sound with flows. I hate mass market crap!!!!!!!
  10. 4dStang

    Find me a one piece H-pipe that doesn't suck

    I need an H-pipe on my 95 Cobra but Summit and Jegs are vauge and pictures are small. Also, some say "except Cobra", What hell is the deal with that, looks the same as the Mustang 5.0 underneath. Please help, I need to order exhaust by tomorrow to get the car up. If someone has one to...
  11. 4dStang

    Why cant my dad understand?

    My dad used to say "Don't fix what isn't broke". My dad musta been a car dummy cause I fix things for MAINTENANCE and modification. But he's dead so now I can do what I want. (he was an a s s anyway) Put what YOU want on it. Its your car. 95-95 is the best. I have two and love the body...
  12. 4dStang

    Which Headlights?

    I also just noticed you don't have a Cobra bumper on there. What is it?
  13. 4dStang

    Which Headlights?

    Can you get me the link for them? I need a new set for my Cobra and yours are T i t s UP!!!!!! :p
  14. 4dStang

    Passenger side mirror

    50resto.com has that stuff.
  15. 4dStang

    AOD - TKO500/600

    I think that power would be moot because with a stock configuration, you probably don't go to the track, or to the track much. You will definatly get a better launch time and have tons more fun driving the 5 speed. I swapped my AOD out 5 days after getting my vert. I don,t regret it at all...
  16. 4dStang

    A few questions about rocker arms

    You have pedestal RR's. Your best choice would be 1.7's because they will add .30 of lift to your stock cam. More POWER!!!! The 93-95 Cobra/Crane RR's will fit under the stock Mustang valve covers too. You can usually find a set on ebay for about $120-$150. I just sold a set a week ago for...
  17. 4dStang

    clay bar

    When I bought my Cobra it was SOOOOOO oxidized I had to 2000 wet sand it and buff it. Now it Shimmers!!!!! I still have a few scratches I havent got out but if you would have seen that black paint...... puke........ It was horrible.
  18. 4dStang

    CD player question

    Sorry missed the fox part.
  19. 4dStang

    Dumb Convertible lx 5.0 fuse box question

    I have a fox vert and a SN 95 vert and I have had nothing like that happen. You must have big feet or the box was broke already. I would strap that thing up with some wire ties if it is no longer connected. :(
  20. 4dStang

    (Probably stupid) Gears Question

    I bought the install kit, crush sleeve and gears. I saved some beans. My install of 3.73's cost $150 and they even through in the fluid and friction modifier. I got my install kit without bearings from Randys ring and pinion for like $50 bucks shipped.
Top Bottom
Back
Forums
Menu