Search results

  1. SableSal

    Photo Request: Injector install

    I hope you used some petroleum jelly to get them in without messing up the seals. Make sure those ports are clean of debris and add some petroleum to them to keep the seals from scratching or taring. Do this to both sides. Just a small film should do the trick!
  2. SableSal

    A/c Issue

    Something is crossed or there's a vacuum issue with the engine? But this sounds to be definitely a vacuum issue.
  3. SableSal

    Drivetrain Universal Joints ??

    Unless you're running an Aerostar DS. Those aren't the same.
  4. SableSal

    tachometer dropping out.

    Last time my tach was messing up badly. Bad distributor. Good luck. Sounds like a bad PIP inside the distributor.
  5. SableSal

    which shifter is the best for the sn95

    I got a Pro5.0 and I love it. MUCH better than stock. So far so good. :)
  6. SableSal

    Kenne bell blowers look like...

    Link in a PM?
  7. SableSal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    Sounds great! I love the progress. Keep up the amazing work! :)
  8. SableSal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    I bought a set of Russell Stainless Steel brake lines rather then the Max Motorsports ones only because it comes with the a 5th brake line for the center rear. Plus the the price of the set was less! I'm sure the max motorsports one is better quality though! I'm totally on a budget...
  9. SableSal

    SN95 with Cobra front brakes

    Something is wrong. Keep bleeding them. I am running a GT Cylinder and Cobra brakes and my brakes do lock and ABS kicks in quite well. Also, I'm running stainless steel brake lines too, that might help. But I would definitely bleed the brakes! Good luck!
  10. SableSal

    Snapped valve cover bolt!!!!

    Don't rig it. Remove the bolt. Drill and Easy-Out. Drill will probably do it. Honestly a pretty easy job. I've taken out worse.
  11. SableSal

    99-04 Dual piston calipers on a 94?

    The show was MuscleCar on Spike. Yes, you can fit them on. Yes there is grinding involved. Don't waste your time, get Cobras. I hated my PBRs, funny I say that... because Cobras are PBR calipers too! Hah
  12. SableSal

    Build Thread "Rising from Ashes" 94 Cobra build thread

    :drool:
  13. SableSal

    Expired 03 gt part out

    Pics of the rear seat?
  14. SableSal

    Over flow coolant tank level question

    Well, kinda. The tank is designed so that over flow will get poured in to the tank, but if the radiator needs coolant it will suck from the tank. Just make sure your radiator is filled to the brim. You'll be ok.
  15. SableSal

    Post Your Newest Stang Pic, 94-95 Cars Only.

    My son and I with his car ;)
  16. SableSal

    What are my stock gears??

    Already saw the tag on the diff. 3L08
  17. SableSal

    What are my stock gears??

    I and Davis3 recently built a pretty killer rear end for my Stang. I've installed it with 3.73s. After installation the speedo was off a decent amount (I anticipated this). I recently purchased a LMR speedcal and installed it. I followed the instructions of the speed cal and it seems to work...
  18. SableSal

    Question about keys and key sets

    Ok, you can get this done for around $20-30 bucks. I bought an ignition lock cylinder for my stang from Autozone. The key will only be cut on the top portion of the key, that's because that's the part the ignition needs. The lower portion of the key is for the doors. Buy an ignition lock...
  19. SableSal

    went to roush nascar team and saw this

    Awesome!!
  20. SableSal

    Suspension Which Isolators?

    Mine is wrapped with electrical tape. Kinda dampers the squeaks. I preffer it because it's even lower ;)
Top Bottom
Back
Forums
Menu