Search results

  1. S

    coupe on 18/19"??

    That might be a good idea, I think the original thread where you did post that pic is toast....
  2. S

    coupe on 18/19"??

    NO! MORE! I went to the site where those pics were and can't read most of it.... knew I should have taken Thai in school... :bang:
  3. S

    Tire wheel combo on a 67 mustang?? Opinions?

    What kind of backspace?
  4. S

    Tire wheel combo on a 67 mustang?? Opinions?

    @17*8/5.25 bs, the rear wheels will be inset by half an inch relative to the fronts, right? (if the axles are inline, I suppose) With the increase in the backspace on the rear, I would go with a wider wheel as long as it does not exceed outer limitations...17*9 or so... If you want the same...
  5. S

    and here's a rack & pinion thread w/links

    For what it's worth as a possible future option: http://www.wurthitdesigns.com/
  6. S

    Official 'Let's discuss Torque vs HP thread...

    http://home.iprimus.com.au/stevebm/dyno_02.htm Also helpful: http://auto.howstuffworks.com/horsepower2.htm http://auto.howstuffworks.com/question622.htm
  7. S

    Good Deal on Wilwood Disc Brake Kit.

    from: http://www.wilwood.com/BrakeKits/Pages/06/index.asp I am having trouble getting the Mustang V8 Spindle 1965-1969 Disc/Drum 140-4304 pdf, but I think I remember the mustang being the 11.75.
  8. S

    Trying to change an fmx to c-4

    Found this on google: http://66.102.7.104/search?q=cache:KxxziSDQ31sJ:forums.stangnet.com/showthread.php%3Ft%3D359803%26goto%3Dnextnewest+289+convert+%225+bolt%22+bell+housing&hl=en&client=firefox-a oddly enough, it's from this site but I can't find it here using the search.... oh well it...
  9. S

    Trying to change an fmx to c-4

    The very early 289's (pre 65) were 5 bolt bell housings.... there is a not so informative pic here: http://www.svs.com/zim/mustang/64engine.html
  10. S

    Trying to change an fmx to c-4

    fmx's were used at the very least behind 351w and c from '69 to '73 mustangs. v6 289??? I don't remember a v6 289.
  11. S

    Looking for wheels and tires, need help with offsets and tire widths.

    Have you tried here: http://www.dodgestang.com/mustang.htm Nick has some good stuff there.
  12. S

    Trying to change an fmx to c-4

    The early 289's had a different bellhousing pattern (5 bolts instead of 6 I thought but there was a different bolt pattern even if it was 6), thus the bolt up problem... the FMX usually only had the 164 tooth flywheel .... c4's sometimes came with this or the smaller 157 tooth flywheel, thus the...
  13. S

    Can you tell if this is a Windsor or Cleveland

    Unanimous: Cleveland. I can't tell what the car is either... and I OWN a 69...:( edit: and there it is...
  14. S

    Cleveland Heads?

    There's a pic on this thread: http://forums.stangnet.com/showthread.php?t=493693
  15. S

    Where to buy engines?

    The engine commonly referred to as a 'semi-hemi' was a Boss 429.... while close in cid to the 427/428, it was a completely different design. The Boss is one of the most sought after. If your after just power, then THX is right in that there are many options including strokers.
  16. S

    Where to buy engines?

    they're pretty rare... what year mustang? does he want originality or performance?
  17. S

    Where to buy engines?

    no, the sohc was a 427, the 'cammer'... the 427's seem to be very desirable engines and are thus reproduced (Unique, Dove, and Shelby i think do/redo them) i don't know of anyone that produces/sells 428's outright.... especially not w/cj heads... i think you will have to find someone who is...
  18. S

    Would a 351c be a direct swap?

    The only thing you would have to consider is accessories....get the brackets for the 'c'.... as Opentracker said, motor mounts and tranny will bolt up. If an FE fit in there, then I'm sure the 'c' will. You might want to qualify your question with regard to converting to a 4v, as nds03 said...
  19. S

    351 W in 67

    You should be able to use the heads, motor mounts, and flywheel. I think you'll need to change the distributor and intake (as you said).... I am not sure on the balancer or even the front cover (is it different w/the deck height being different?). You may need different bracketry for the...
  20. S

    Cleveland gurus in here!------->

    Your goals seem realistic enough, but as for specifics, there is a forum you might be interested in: http://www.network54.com/Forum/119419 Good Luck!
Top Bottom
Back
Forums
Menu