Search results

  1. 93 LX

    S Spring Need Help ASAP

    LOL was gonna mention that! LOL
  2. 93 LX

    Wide rear tires, moving rear shock question

    I think they are tlaking about the quad shocks. When you look in the rear wheel well you will see them. In some cases you need to flip them around.. the fat end swaps with the thin end to allow for a wider tire.
  3. 93 LX

    4 speed to 5 speed help

    Tremec Trannys werent popular at that time. I still have the T-5 I installed back then still running hard in the Capri! :P
  4. 93 LX

    4 speed to 5 speed help

    I made the swap back in the mid 80's on my 82 Capri. Its still alive and while power shifting is hard on them if you have a good firewall adjustor and a good clutch they will hold up ok. I have never broken it and its been this want since 84 or 85. So if your going to keep your 4 eyed stang...
  5. 93 LX

    1993 cobra oil pan

    my pan is covered in oil and grime LOL
  6. 93 LX

    Mustang Timing Belt Vs. The Chain!

    You can get gear drive that isnt noisy. Jackson uses straight cut gears so they do make a ton of noise. You want gears cut like rear end gears, I think its call sprial cut gears, they are quite. Timing chains do stretch but they are a tried and true item. Belts wear out and with the way the...
  7. 93 LX

    anyone that knows lights???

    If they are higher wattage bulbs they may be buring the head light switch in the car. Pull the dash pod and look at the head light switch. If its burned then lower current levels are getting to the light thus not giving a white light. Also there are some cheap lights out there that will...
  8. 93 LX

    Any Socal Stangers?

    sounds good..
  9. 93 LX

    Has anyone used Nite Shades on their late fox?

    where did you find the paint? No one sells it here in So Cali so it looks like i have to order it so I have placed this project on hold... If you search on google you will find a ton of "how to's" out there.
  10. 93 LX

    are torque box reinforcments good prevention?

    so which ones would work best and installation is easiest?
  11. 93 LX

    Ignition timing and hydrocarbons.....

    more timing more H/Cs
  12. 93 LX

    Any Socal Stangers?

    so........ when?
  13. 93 LX

    Cowl removal progress thread

    its the piece that is between the fenders and is against the windshield. This piece is welded at the pinch weld on the firewall. His hood flew up and smashed the cowl panel. This is common if your hood latch fails or of you have a fiberglass hood thats not latched all the way.
  14. 93 LX

    Cowl removal progress thread

    hmmm more pics! LOL
  15. 93 LX

    Mass Air Inlet Tube = Ugly

    how did you do the paint?
  16. 93 LX

    Mass Conversion Complete

    awesome.. something else on the project list!
  17. 93 LX

    Shop Towel in My Coolant!?! I suck!

    I think summit or jeggs sells a filter for the upper hose. May be worth while in this situation....
  18. 93 LX

    Mass Conversion Complete

    which write up did you use? Gonna be converting my 86 in a few months. Need to get the top working and get the drivers door replace. Damn semi's! LOL
  19. 93 LX

    dipstick troubles

    get the fox stick tube.... if its going in the fox...
  20. 93 LX

    Tie Rod ends w/ SN95 spindles.

    I dont think you can use SN95 because I heard they are metric thread. So at the least Foxes will work but if you are using 96 and above spindles you may run out of thread. I have never seen anything about taurus tie rods but get a set and see what happens. No work then take them back.....
Top Bottom
Back
Forums
Menu