Search results

  1. Krusher

    adding sub to mach 460

    whatever you use, rf, alpine, infinity, eclipse... doesn't matter... what matters is that you like the sound that comes out of it. If you can't figure out how to install it then pay someone else to do it... that's fine too... it keeps high school kids with jobs.
  2. Krusher

    Car Audio Forums?

    well I see no one has made this comment yet......... the smallet the sub, the cleaner the thump... if you get too big all you'll hear is BUUUUUUUUUOOOOMMMM all the time... if you like to hear the bass cleanly stick with the 10s.... that could be said as my opinion but I've checked out...
  3. Krusher

    adding sub to mach 460

    expect to pay $60 or so just for someone to do 20-30 mins of work......... And it is so simple. If you can replace your spark plugs/air filter/FUEL then you can do stereo work.
  4. Krusher

    adding sub to mach 460

    RCAs are better equiped to handle signal noise so you'll have to convert the speaker level signal to low level RCA right at the factory wiring.
  5. Krusher

    adding sub to mach 460

    Yes alternator whine is bad... you hear your alternator scream louder and louder with each RPM increase... it really drives you crazy when you can't turn the damn amps off because you don't have a remote lead... which again... something you're going to have to deal with is the amp always being...
  6. Krusher

    adding sub to mach 460

    And this was my order from KnuKoncepts.com for a 4 amp, relatively high end system: 2 Fuse Distribution blocks 2 FT 1/0G Kolossus Kable 1 Digital 1/0G to 2-4G ANL fused block 2 80A ANL fuses 2 Terminals (Pos and Neg) 2 complete 4G amp kits for 4 channel amps 20 FT blue Kable 12G...
  7. Krusher

    adding sub to mach 460

    actually I'd run a .65 box with poly fill... makes for a little bit more trunk space
  8. Krusher

    adding sub to mach 460

    then buy 1 alpineM350 amp (~$170) and 1 10" alpine type r sub with enclosure (~$120) and go to knukoncepts.com and buy either their 8 gauge kit (~$25)or their 4 gauge kit (~$30)... 4 if you plan on upgrading further... 8 if not. That will give you what you need for something that you can turn...
  9. Krusher

    adding sub to mach 460

    oh yeah... and I really, really tried to make a good system with the factory hu... doesn't work... too much noise gets into the speaker level signal inputs for the amps.
  10. Krusher

    adding sub to mach 460

    until I put the rest of my system in I'm running 2 6.5" tube type subs from walmart off an alpine m350 amp... not bad and the subs only cost $15 a piece... smooth bass at low levels but don't crank it up.
  11. Krusher

    Stereo Install

    I will be installing the following Alpine CDA9811 Knukoncepts Battery Terminals 1/0G from terminal to digital dist block (2 80A ANL fuses) 2 sets 4G from digital dist block back to the trunk on either side 2 4G-8G fused (40A) dist blocks on either side 3 sets RCA right down the...
  12. Krusher

    alternator whine

    nahhh... its just the factory hu... it sucks... I should have done what I'm doing now in the first place... using existing, proven equipment. (alpine CDA9811)
  13. Krusher

    alternator whine

    well for everyone's information... the noise is still there!!! I sanded down even more on the ground site... re-ran every signal wire and made sure that if it HAD to cross a power wire, even the remote lead wire, they were at 90* to each other... and it still made no difference... f**k it...
  14. Krusher

    factory hu size?

    hey, what's our stock hu size? din 1/2, double din???
  15. Krusher

    radiator upgrade

    well I fitted a (EDIT 94/95) cobra 3 core rad in a tbird... but looking at my 02 v6 rad the same won't work... which radiator will work with the factory brackets and hoses? I prefer to stay with 3 core. EDIT: will a 99-04 model cobra rad work?
  16. Krusher

    alternator whine

    sorry... no grounds besides the big 4 guage black ground wire that I know is suppose to be there for the amps.
  17. Krusher

    what size are the rear and front speakers

    the factory opening will fit 5X7 or 6X8. With an adapter plate you can fit all kinds of speakers. They have adapter plates for 5X7 to 6X9s, and more importantly... 5X7 to 6.5"!!! Round sound is best. That's your best choice.
  18. Krusher

    2003 V6 Supercharger

    there is a plate that you either have to fabricate yourself or buy to "convert" the output of the charger to the input of your engine. that site above has the guy that makes them if you don't want to spend the time.
  19. Krusher

    alternator whine

    well two signal wires go across one of the amp's power wire once... no grounds. I'm running through the factory hu with speaker level inputs.
  20. Krusher

    alternator whine

    well... got the whole thing together... sounds nice... when the car is off. THen I hear the damn alternator whine when the car is on... any fixes?
Top Bottom
Back
Forums
Menu