Search results

  1. Dan_Soprano

    Post Your Newest Stang Pic, 94-95 Cars Only.

    408w going in this weekend....
  2. Dan_Soprano

    North East SSoM Members!!!

    I'm getting that damn motor in this weekend if it kills me...
  3. Dan_Soprano

    Oil Pressure Gauge Help

    As long as the hole is perfectly circle with no nicks or damage to the edges it does not effect the strength.
  4. Dan_Soprano

    Engine Head Gaskets Again

    http://www.dsmtuners.com/threads/measuring-head-and-block-deck-got-feeler-gauges-and-straight-edge.304094/ decent write up on how it's done.
  5. Dan_Soprano

    North East SSoM Members!!!

    Oh yeah, I will fill the converter before installation, and trans once lines are run before first start. Unfortunately did not get the motor stuffed again as planned. Family stuff came up on Sat, then the weather was brutal here yesterday so I didn't want to risk leaving one of our daily...
  6. Dan_Soprano

    Sn94 5.0 Complete Swap To Gutted 88 4 Cylinder

    Kangaroo station.... Florida I presume?
  7. Dan_Soprano

    Pulling Engine And Transmission

    Easiest / safest way is to get a leveler and bolt directly to the heads. PLEASE NEVER use old seat belts!!
  8. Dan_Soprano

    Firing Order Help

    351W and H.O. 5.0 firing order is the same.
  9. Dan_Soprano

    Oil Pressure Gauge Help

    I have always just drilled a 1/2 - 3/4 inch hole through the firewall next to where the clutch cable goes through, and bought a rubber grommet to keep it professional looking and not have wires run over bare metal. As far as Teflon tape you refer to, get it close to the end of the threads, just...
  10. Dan_Soprano

    Engine Head Gaskets Again

    You will more then likely be wasting your money at this point just throwing new head gaskets on it. Get the heads and block decked as Hypnotic mentioned above to ensure flat surfaces.
  11. Dan_Soprano

    North East SSoM Members!!!

    Ended up not getting it in last weekend. Hoping for this weekend. Have the braided stainless cooler lines on order, should be here tomorrow. Once I get the motor in, the rest is just nickel/dime stuff. Hope to fire it by mid February. First start is going to be interesting. Have to get it...
  12. Dan_Soprano

    North East SSoM Members!!!

    Trying to drop it in this weekend. I've been home for over a month, and have had the motor since I got back. Haven't had the damn time to do it though. I pretty much have everything else I need to get it up and running minus the trans cooler and lines. Wiring is going to be fun. I'd love to...
  13. Dan_Soprano

    North East SSoM Members!!!

    No, got a BBF 460 going in that!
  14. Dan_Soprano

    North East SSoM Members!!!

    She's coming together!
  15. Dan_Soprano

    North East SSoM Members!!!

    almost 21,000 posts, and almost 3/4 of a million views! Wow.
  16. Dan_Soprano

    North East SSoM Members!!!

    Well 408w long block has been on order for a few weeks now. Ended up going Coast High Performance, late model F4TE block, forged crank, H-beams, and pistons. Went with AFR-205 heads, and they will be doing a custom grind cam for me based on the car, trans and usage. Still deciding on what...
  17. Dan_Soprano

    North East SSoM Members!!!

    Any update? I have a fresh fully built C4 sitting on the bench at home, as well as a nice set of slicks and skinnies. Will start working with Coast High Performance here in a few weeks to start the 408w build so it's ready to ship by then time I get home in December.
  18. Dan_Soprano

    North East SSoM Members!!!

    Again, you should sell it to me....:)
  19. Dan_Soprano

    North East SSoM Members!!!

    you should just sell it to me....... It would like Florida way better anyways....
View older results
Top Bottom
Back
Forums
Menu