Search results

  1. Lons2001GT

    Lowering springs and 10" tires

    I have an 01 with 10.5 " bullits and steeda sport springs. The drop is 1.25 " and I've had no rubbing problems, even at the track under hard launch. You should be fine unless the prokit is a crazy drop.
  2. Lons2001GT

    Water Injection? What is best?

    The only kit that I know of that will work on a positive displacement blower is the Snow performance kit. They have a kit that is under 400 bucks but there are a lot of optional add ons that may come in handy. I have a Mr freeze kit so I don't know a lot about the snow kit, but my kit only works...
  3. Lons2001GT

    Car starts but wont stay running!! Please HELP!

    Let us know if it is fixed and I'll send you the adress to send the beer. Corona please..........just kiddin. lol.
  4. Lons2001GT

    Car starts but wont stay running!! Please HELP!

    If I had a pic of the engine bay, I could point it out. It is bolted to the upper intake plenum and has two bolts. It has one electrical connector plugged onto it and one large rubber tube (not vacuum line small, but not intake tube large) running from it to your intake tubing or piping. It is...
  5. Lons2001GT

    Turbo Mustang V.s. Supercharged

    Turbo if you want ultimate in efficient high horsepower, supercharger if you want a little better engine reliability and less complication/cost .
  6. Lons2001GT

    Car starts but wont stay running!! Please HELP!

    The iac or idle air control motor is probably bad. I have replaced several of them for customers with 99-01 gt's, including my own. Symptoms are the same as yours. You can try and take it off and clean it out with gum cutter (carb/tb cleaner) or just replace it. It is not that expensive (should...
  7. Lons2001GT

    Xcal2 or Dynotune???

    Dyno tune is always better then mail tune but with your mods I don't know if it will be worth another 400 bucks to do it. I have no idea why anybody needs to charge you 400 bucks to tune it though. I had my car dyno tuned with a charger for with and without methanol injection and it still only...
  8. Lons2001GT

    Maryland State inspection?

    Not many inspectors here in Maryland will slide you through unless they know you very well because of very steep penalties on their drivers license if they are caught. Some may let you slide on something very minute like the gear indicator but nothing especially safety related like the brakes...
  9. Lons2001GT

    96 Cobra Dynoed today.....terrible numbers!!!!!

    It has to be a mistake on the dyno operators part. A 9.6 in the 1/8th with a 2.3 60ft definitely means this car has more then 178 whp.
  10. Lons2001GT

    Anybody know what belt size to use ??

    ttt
  11. Lons2001GT

    Anybody know what belt size to use ??

    see sig for vehicle details, I am changing from a 3.4 reichard pulley to a 3.3 reichard pulley. I used the belt that came with the kit when I changed from 3.6 to 3.4. That belt has at least 10k on it and occasionally slips now with the original belt tensioner (I'm replacing that too w/reichard...
  12. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    Well if you don't have enough time to install the snow kit before next weekend, throw the freeze kit on there and check it out. Its so easy, you could put it on in a half hour and take it off just as easy to try the snow kit later. Im sure it wont hurt to have it on for a week or two. It would...
  13. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    Sorry for getting upset. It sounded like you had already bought one so I was a bit confused why you posed that question and were so negative to everything I had to say about it. I understand that you were just relaying info you thought would be helpful, I guess I'm a little touchy about it...
  14. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    The mr freeze is only designed for centrfical superchargers and turbos, I believe that the snow kit does have the ability to be used on positive displacement blowers with the maf kit, if you use prochargergt's link you can read about it.
  15. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    Are you installing the mr freeze or convincing yourself to use the snow kit ? You started this thread, asking people about problems with mr freeze and then just started coming up with every reason imaginable that the snow kit is better then the mr freeze kit. I have tried to show that there is...
  16. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    Also, can any of you snow kit users chime in with the amount of pressure your kit sprays the mix at. I have seen posts where some come on at only 4 psi which probably would not atomize as well as 10 psi depending on the jet. Of course, mr freeze starts spraying at 1 all the way up to 10 at the...
  17. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    Mr freeze uses a boost signal to pressurize the tank, which then sprays water/meth into the intake based on the amount of boost that the supercharger makes. The mix atomizes fine on my car at only 10psi and the air drawn into the supercharger helps as well. I will agree that if you have the...
  18. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    I have heard the rumors of eroding impellers from the water/meth but I have seen no evidence from anybody yet. I have only heard about it in the context of theory and not as fact. I am not saying that it is not possible, but I would love to hear from somebody with specific experience of damage...
  19. Lons2001GT

    Anyone have problems with Mr. Freeze kit?

    I have had mine for a couple weeks and no problems so far, just make sure all the hoses are cable tied so they can't pop off easy. I would recommend checking all the lines periodically when you first get it on to ensure no mishaps. The snow kit is definitely a more elaborate kit and I would...
  20. Lons2001GT

    Pics of my car and Mr.freeze install

    With the amount of air rushing through the supercharger at 50,000 rpms, the mist of water and meth should not hurt anything. I have to admit I havn't been running it that long to claim ultimate reliability, but I am not worried about it. Mr.freeze does not use that much fluid at only 10lbs of...
Top Bottom
Back
Forums
Menu