Search results

  1. Skud

    Help!! Flywheel bolts!!

    Allright, so I did find out what bolt DOES fit.. I have a set of stage 8 header bolts and they are the correct size. They thread cleanly all the way through the flywheel. It's definitely a thread pitch issue. The header bolts are fine pitch and the ARP pressure plate bolts I have now are...
  2. Skud

    Help!! Flywheel bolts!!

    OK, so I'm doing an 11" to 10.5" conversion at the same time as the motor is out. I have a Fidanza Al flywheel which has the holes for both an 11" and 10.5" pressure plate. The clutch/PP combo is a custom unit from Promotion Powertrain and it's a 10.5" unit. The problem is that the bolts on...
  3. Skud

    TR-3650 PROGRESS!!!

    I took mine in a awhile ago and I was lucky enough to me in the car with the service manager when it did it.. Out of the parking lot, first shift from 1st to 2nd "crrrunch".. "Oh, yeah I see what you mean.. Don't know how they could have missed that.."..:rolleyes: Then I had the TSB...
  4. Skud

    MM Panhard bar & TA users

    I have the MM Panhard Bar and the biggest part of the install was tailpipe clearance. Otherwise I think it would take me 3 - 4 hours to do it all over again. I did it by myself, but having another person to hold the PHB up while I drilled would probably shave quite a bit of time off...
  5. Skud

    Test- Dont open

    I have my MCSE/Security, 3Com NBX VoIP and should have the CCNP and 3Com VCX certs in 6 months or so.. Riley
  6. Skud

    Is anyone getting sick of rice?

    I don't mind rice.. The more people below me, the fewer above me.. :) Riley
  7. Skud

    Test- Dont open

    Free post!! Oh wait.. crap this is talk..
  8. Skud

    edelbrock manifold finally released

    I have a built Ford 400 (~375hp/400+tq, boat anchor my ass!!:eek: ) with a Wieand Stealth dual-plane manifold. It's considered to be a "good" street intake manifold from idle to ~5500rpm. Its runners are lucky to be half as long as the runners on a stock 4.6 intake. In fact, from my limited...
  9. Skud

    SCT XCAL 3???

    I hear it's good for +10hp over the xcal2.. :D
  10. Skud

    Passenger REAR tire wear only????

    Could also be a bent/twisted axle tube. This causes the wheel to roll on an angle instead of straight ahead. Best way to tell is to put a straight edge across the face of both rear wheels. Measure each side to the other side of the car. Measure ments should be the same. EDIT: Stupid...
  11. Skud

    Show me your DSG!!!

    Mineral grey is better..:hail2: Represent.. Riley
  12. Skud

    What is this thing?

    So this work in conjunction with the PPRV? Or do only cobras have PPRVs? Riley
  13. Skud

    Cobra tank and pumps

    I've seen/heard of a few instances of people bending the float so I just decided to pop the arm off. It comes off pretty easy. Just make sure not to break the plastic tab that holds it on.. :) Riley
  14. Skud

    Interesting Ticket

    That's a good question. I see LEOs hiding under overpasses on the shoulder all the time. Most often you don't see them until you're pretty close. I've always heard that you only need to slow down if the lights are on. I'd slow down if they were on the shoulder, not hiding. I definitely...
  15. Skud

    Cobra tank and pumps

    It's there. I just removed the arm so I could get the assembly out of the tank. Both the float and the sending unit are included. Riley
  16. Skud

    Cobra tank and pumps

    Pics!! Riley
  17. Skud

    Cobra tank and pumps

    It's good!! UPS just dropped it off. The tank looks and smells new. I pulled the pumps out and they are the dual pumps. They do look new, but it looks like they have "snowflakes" on them.. It is also a baffled tank. Like Randy said, these are probably new takeoffs, it's a great deal...
  18. Skud

    Cobra tank and pumps

    UPS says mine will be here tomorrow.. Riley
  19. Skud

    Cobra tank and pumps

    It "looks" OK. Here is the description: He does say that he has the tanks for NA cars, so it looks like he knows the difference. We'll see in a few days I giess. :shrug: Riley
  20. Skud

    rear caliper anti moan bracket

    I have the bullitt kit with the red calipers and running ponies. The anti-moan bracket would not fit so I just left it off. The only time I get moan is backing out of my garage in the morning or if it's really wet outside.. After that it doesn't make a sound.. Riley
Top Bottom
Back
Forums
Menu