Search results

  1. R

    Swap 2000v6 into 94 v6

    Alright so the harness and computer, are the engine mounts ok, it will come with all the intake and such.
  2. R

    Just Redid Head Gasket Quick Q's

    Guys I just read on the sensor on top of the throttle body that Im not supposed to clean the throttle body but I already cleaned the inside alitl because it was full of crap? Could this be the problem?
  3. R

    Swap 2000v6 into 94 v6

    Hey guys is this possible if I buy a whole engine out of a 2000 3.8 stang? What would I have to replace?
  4. R

    Just Redid Head Gasket Quick Q's

    ttt
  5. R

    Just Redid Head Gasket Quick Q's

    Also, on the intake manifold, upper, there is a plastic tube/pipe that goes across and connects to the passenger side valve cover. On this tube/pipe, there is a small rubber hose near the end, where does this connect to, I have no idea. Last of all, there is a metal pipe that connects to the...
  6. R

    Just Redid Head Gasket Quick Q's

    Hey guys I just got my engine back together in my 94 3.8, the head gaskets went. Well, when I started the car it had a few issues. First of all, it has no idle, the car stays on as long as I keep on the gas, when I let off the car dies out slowly. Next prob is there was some smoke still comin...
  7. R

    Wiring an Equalizer Quick Q

    When I wire it up, I am going to wire the speakers to the equalizer, and the head unit to the equalizer using rca cables. Yes, I would like to put it right under the head unit. So would it be cool to just splice the headunit and equalizer wires together like the power and ground or just the...
  8. R

    Wiring an Equalizer Quick Q

    The equalizer has a ground, power, and remote just like an amp. Im just not sure whether to connect the power directly to the battery, or to the fuse box or something and how would I do that?
  9. R

    Wiring an Equalizer Quick Q

    Hey guys wats a good place to wire the power on my equalizer too, or how should I wire the power, like an amp?
  10. R

    Aftermarket steering wheel

    I was figuring i would just not wire up the airbags and put on a new steering wheel, but I am doubting what it would look like especially on a 94 cuz the stock steering wheel stick out a lot.
  11. R

    Aftermarket steering wheel

    Do you guys know any steering wheels that would look good or pics of them in cars. My airbag is blown and it is cheaper for a new steering wheel than an airbag. Let me know thanks
  12. R

    Should I or Shouldnt I?

    any suggestions???
  13. R

    Should I or Shouldnt I?

    Alright, my question is whether or not I should hook this amp up to my speakers. I have a Pioneer DEH-P7600MP stereo and a MTX thunder 282 amplfier. I have pioneer 4 ways in my doors and rear deck. Will the sound have better quality, bass or whatever if I run the amp to the stereo and the...
  14. R

    Cam follower??? Please help

    Hey guys I called someone who is sellin a 4 banger and I wanna get it for my lil brother but the seller told me something about a cam follower which caused some engine noise. Have any of you heard of this and is it a major problem? The car has to be a daily driver and swapping the engine is...
  15. R

    Inspecting cylinder Heads

    ttt
  16. R

    Inspecting cylinder Heads

    Hey I got the cylinder heads out of my car and the head gaskets were blown. I was told I need to send them to a machine shop to have them resurfaced and pressure checked. Do I NEED to do this or do I have any other options? Is there any way to look at them and determine if they do need to be...
  17. R

    Head Gasket Repair

    I am changing the head gaskets in my 94 3.8. There is a black pipe that comes off the water pump and heads across the passenger side of the lower intake manifold. It is holding me up and I need to figure out how to get it out. I took out the bolt attaching it to the water pump yet it still...
  18. R

    Fuel Rails

    I am rebuilding my engine to change the head gaskets and need to get the fuel rails out. The problem is that ford decided to run wires in between the rails to the accessories like the a/c and I cant get the wires out. Any tips on taking the fuel rails out. Also, do I need to take the...
  19. R

    Changing Head Gaskets

    I have a torque wrench and my cousin is going to help, he's done it before.
  20. R

    Changing Head Gaskets

    Alright thanks, I hope I can do this right...
Top Bottom
Back
Forums
Menu