Search results

  1. tnardo

    2.3 to carbed 5.0 swap duraspark wiring

    what diagram....where?
  2. tnardo

    2.3 to carbed 5.0 swap duraspark wiring

    [email protected] i have a good idea i just wante d to know what most people use for that
  3. tnardo

    Forged pistons (Speed pro) vs hyper pistons (kenny Black)

    my buddy ran keith black domes with a 200 hundred shot put out over 600 rwhp with a 306 and the pistons took everybit of it
  4. tnardo

    2.3 to carbed 5.0 swap duraspark wiring

    where is hot in run what the best place to wire it to
  5. tnardo

    2.3 to carbed 5.0 swap duraspark wiring

    where should i run the red wire that comes off of the module
  6. tnardo

    2.3 to carbed 5.0 swap duraspark wiring

    I've read about the HEI,, call me stubborn, or just call me a ford nut. i dont want any chevy on my stang lol. but maybe i will... i have the duraspark module, coil, dist. pretty much everything i need and im a very broke college student. i just want to hook it up and see if i can get this...
  7. tnardo

    2.3 to carbed 5.0 swap duraspark wiring

    im installing duraspark on my 89 it was a 2.3. i have everything from an 85 gt. but i keep reading about this resistance wire for the durspark. the wiring harness is junk from the 85. so im hard wiring in the duraspark. ive researched all the links and im still not exactly sure how to...
  8. tnardo

    post your e.t's and hp with gt40 irons

    what times and hp numbers are you getting with gt40 iron heads. post cam, compression and other mods. if yall could
  9. tnardo

    Nirous on hypereutectic pistons????

    my friend ran keith black domes on his car with trick flow heads and all kindsa of other mods he ran a 200 shot he ended up cracking the block in half on the dyno he put 440 hp n/a and had 581 ft lbs at 4200 with the 200 shot when it broke the piston took that they re still in great condition
  10. tnardo

    4cyl gauges with a carbed 5.0

    I put a %.0 in my 89 4cyl car. I'd like to use the stock oil, coolant, and battery gauges. I have the edlebrock performer rpm intake. what sensors do i need to buy. i would think i should get 89 5.0 sensors... am i correct?
  11. tnardo

    installing 8.8 in a ex 4cyl car need help with brake lines

    can i eliminate the banjo bolt and just get a t fitting and run the brake line from the front to the t then 2 each wheel cylinder
  12. tnardo

    installing 8.8 in a ex 4cyl car need help with brake lines

    ok the rear end is in and i put in brake lines from an 8cyl car. i also bought the new rear brake line, it has a hose with a banjo bolt and a box where the hose goes into and two fittings are on the side. the rear end has both lines from each side going to a box that also has a hose comming...
View older results
Top Bottom
Back
Forums
Menu