Search results

  1. fastimes69

    Need help with Vortech S-trim.

    Yep everything is fine on it now. Time for a pulley!!!
  2. fastimes69

    Need help with Vortech S-trim.

    I went back and rechecked everything and the only thing I found was the shop that dyno'd the car turned the bypass valve around for some reason :shrug: (the vacuum outlet should be facing down, it was pointing towards the firewall). Don't know if that makes a difference. We drove the car and it...
  3. fastimes69

    Need help with Vortech S-trim.

    Well the vacuums are ok, which rubber boot are you referring to??The one that goes into the firewall to the air meter or to the head unit?
  4. fastimes69

    Need help with Vortech S-trim.

    The car revs fine and idles fine, it's got a 255 in tank plus the t rex (installed correctly), the plugs are gapped at 35 (one range colder). There is no pinging whatsoever. Under normal acceleration it drives fine, but when you floor it, it feelslike the boost is not kicking in,the belt is on...
  5. fastimes69

    Need help with Vortech S-trim.

    anyone???
  6. fastimes69

    Need help with Vortech S-trim.

    So we installed an S trim on my buddies 94 Cobra. The car cruises and idles fine but when you floor it, it does not pull. It feels like its holding back. We put on a boost gauge and it shows between 7-9 lbs under load. Has anyone ever had this problem before. Any troubleshooting tips. Does...
  7. fastimes69

    Who did you buy your Lincoln Mark8 fan from???

    I'm interested in purchasing a Mark 8 fan. I've seen several people selling these fans on E-Bay, but I would like to know if there is a seller that some one knows about or has bought from on E-bay. Is there anyone reputable and honest on E-bay :shrug: that is selling these fans. Let me...
  8. fastimes69

    Installed an S-trim on a 94 Cobra and have some questions...

    Another question is for the oil cooler lines. They end up right where the alternator mounts. Does it have to be eliminated? I see no way of reconnecting it unless I missed something or there is a way ti rig it to work. The instructions say to use the long 5/8ths heater hose and connect it from...
  9. fastimes69

    Installed an S-trim on a 94 Cobra and have some questions...

    I just installed an S-Trim on my buddy's 94 Cobra.I need to know how to bend the A/C line that is near the supercharger and the radiator hose.The instructions show like a 90 degree bend, but that's easier said than done.I f any of you installed an MSD 6al with the BTM, where did you guys mount...
  10. fastimes69

    Help me choose clutch, factory pedal feel preffered

    Been using Centerforce Dual Friction for a while, works flawless, smooth pedal. It will hold some power. I have been running consistent 11.70's- 11.90's for over a year with this clutch, never given me a problem. :nice:
  11. fastimes69

    Would this be a blown head gasket? Strange test results

    Did you put in a new thermostat when you put in the new intake.Did it already have a t-stat. Make sure you did not put it in backwards. My buddy with a Cobra had similar problems, just a thought......
  12. fastimes69

    GT40 junkyard heads

    Thanks for the reply, well depending on the mileage the motor that the heads were on had, you should be able to use the stock springs with the stock cam. Port work prices will vary. Usually between 200-400 bucks!!!
  13. fastimes69

    GT40 junkyard heads

    What junkyard did you get those from. My brother lives close to Houston about 45 minutes away. Do you have a number to call them? Thanks
  14. fastimes69

    Used gears

    I've installed quite a few set of gears myself. From personal experience, I always like to ride in the car of the person who is selling the gears so I can hear for myself if they vibrate, make noise, etc. If there is no noise , I'll by them. My 4.10's have been in three different cars (installed...
  15. fastimes69

    A couple of nitrous questions?

    The thing is we have upgraded our fuel systems, I run 24 #ers with the pusher that comes with the kit and my cousin has a pusher with a 190 in tank.
  16. fastimes69

    A couple of nitrous questions?

    anyone?? :shrug:
  17. fastimes69

    A couple of nitrous questions?

    I'm running an NOS (05115-2) stage 2 kit on my coupe and am currently running a 175 shot.What all is needed to upgrade this kit to a big shot or to run like a 200 or 250 shot.Has anyone ever upgraded this particular kit? My cousin just got a Nitrous Express wet kit that's adjustable from 35 to...
  18. fastimes69

    Electrical guru's please help me with charging system problems!!!!

    Well I finally found the problem!!I traced the yellow and white wire from the alternator all the way up to the solenoid. What I found was that somewhere under the battery tray, the wire was cut and the rest of it all the way up to the solenoid was black. It came loose where it was taped up so...
  19. fastimes69

    Electrical guru's please help me with charging system problems!!!!

    OK, I checked the yellow and white wire but it does not have power. My setup has a one wire hook up that runs to the solenoid, then a three wire connector for the voltage regulator, and a black and white wire alone with a female connector.
  20. fastimes69

    Electrical guru's please help me with charging system problems!!!!

    Ok, I'll look in to that later today and see what happens. Thanks
Top Bottom
Back
Forums
Menu