Search results

  1. billfisher

    Drag Radials: best to buy

    for absolute hooking ....hoosier 275/50/15's. they have handled all the power ive thrown at them. ill see if they can hook the new motor, but i suspect they can. you cant DD most DR's. water makes the slick as wet butter. i looped the BFG dr's i had on I-65 in rush hour and it was just damp...
  2. billfisher

    1200hp turbo build

    there is no wiring for the 4v. i even use the stock throttle cable. same sensors in the same place. maybe a few extensions needed but thats it. a tune before starting it is needed also. its my stock 96gt pcm. the turbo flows more than enough for this motor. im tempted to get cams for...
  3. billfisher

    Tire recommendation please for 01 Vert

    so far the best tire ive used outside of P1 pirelli's is hankook v12 EVO's. they handle nearly as good as the pirellis
  4. billfisher

    1200hp turbo build

    heres the motor built. i admit i was tempted to take the easy way out and just put the little turbo back on it for now. nope ill finish it right.
  5. billfisher

    Stock Coyote cam duration and overlap range?

    its 205 degrees @ .050 duration and .472" lift.
  6. billfisher

    Tune vs Warranty after reflash

    they can tell and will void the warranty if necessary. try to decieve them and they will treat you that way.
  7. billfisher

    Progress Thread Flghtmstr1's 700 Rwhp Build

    a single 255lph (43gph)is good for ~500rwhp depending on BSFC of the engine. twins are the same as twin focus SVT pumps. 86 gallons per hours is plenty of fuel for 800 or so rwhp.
  8. billfisher

    1200hp turbo build

    they are spoken for. sorry man.
  9. billfisher

    1200hp turbo build

    that engine stand is an old one. a 69 pontiac 400 ram air was the first motor ever built on it...in ~1991.
  10. billfisher

    2011 Starting problem sometimes

    my stock tune did it. my aftermarket tune has never done it.
  11. billfisher

    Can a 6'6 man fit in a S-197 GT?

    im 6'5" 285. i fit fine.
  12. billfisher

    would a G8 gxp win against the 5.0?

    you need tires and upper control arm to be sure. the slower you start the better for you. he will not walk all over you. mod up to be sure.
  13. billfisher

    Care with the 4th to 5th shift 2011 5.0 6M

    its happened to me a few times, but i hit the clutch before it revved too high. you gotta watch. the tranny is designed to shift a 6800+ with ease.
  14. billfisher

    Retuned and new dyno numbers are in!!

    his motor will be fine unless it detonates a little. it is a turbo, and it makes power per pound of boost blown cars cant. 450 is not too much IMO. as long as nothing goes wrong it will live plenty long.
  15. billfisher

    should I trade my 1996 cobra 4 a 1999 cobra?

    no, a 2011 and enjoy real 4v power.
  16. billfisher

    1200hp turbo build

    ht60. its a reverse scroll. 73.4mm inducer.
  17. billfisher

    1200hp turbo build

    pictures are piss-poor. laptop cam. didnt feel like getting the Canon out. turbo came in. used a miller lite for size reference.
  18. billfisher

    May have totalled my car

    GET BIGGER BRAKES AND THE BEST TIRES. stopping in 104 ft from 60 has its place. i use my 2011 brakes hard all the time.
  19. billfisher

    Received hate mail about starting my car..

    you know man that hurts me deep......im only slow for a few more months. then ill be 'moderate'. this build is costing ten times what the first one cost. the car is mostly done, its the fuel, and motor that are running the costs so high. everything HAS to be ARP2000 this and that. bigger...
  20. billfisher

    Found a good deal on these turbo kits

    get yourself a good turbo and build it. its not very hard to do. or get the kit and use a decent turbo. there are reputable copmpanies on ebay the rebuild quality turbos. i have used two so far, and just got number three. have yet to have an issue that wasnt my fault...
Top Bottom
Back
Forums
Menu