Search results

  1. SN65

    The 550 GTC Project

    I just took a real hard look at the "structural" modifications and the price is looking at right about $2,500. This includes the specially designed "K" member. The big cost comes in with the Front/rear suspension and the R&P. As best I can figure we are looking at about $12,000 for the entire...
  2. SN65

    The 550 GTC Project

    Hi 65, I could supply, as a kit, the following... First, the chassis stiffening package. This package would include all the structural modifications to make the early stang chassis as stable as the SN65. Second, the front suspension upgrade. Changing over to a modified Macpherson strut...
  3. SN65

    Insane Rear brake conversion... ???

    Hi All, Silly question, but..... I need to put the drum break setup from a 1967 mustang onto a current 9" currie rear end with a disk break setup. Will the 67 drum setup bolt right on, or will there be extensive modifications??? Bob
  4. SN65

    The 550 GTC Project

    Hi 65, If you are only interested in the structural changes, I will be happy to make them available. Hummm... Would you be interested in the structural modifications without any alterations to the suspension? Bob
  5. SN65

    The 550 GTC Project

    Hi 1320, I have the basics worked out. The Ferrari design eliments we will be incorporating are... Dropping the car about 3" Relocating the wheel openings up to match the drop. Fender and quarter extractor vents. Molding the rear bumper, valance and quarter extensions into the body...
  6. SN65

    The 550 GTC Project

    This was originally posted at the following link... http://eleanor.pro3i.com/showthread.php?t=624729 After much consideration, we have refined and better defined the project. With that said, here is the revised post and new info... With the SN65 project winding down, we have been...
  7. SN65

    SN65 Dyno results

    I just posted a video of the dyno session at the Sn65 website. Mods to the 03 Cobra engine are just a CAI and a full Magnaflow exhaust including cats. Bob
  8. SN65

    SN65 Dyno results

    The graph I have is pretty hard to read. It has all 7 runs on one sheet and they all kind of blend together. The HP graph is a straight line from 200 HP at 2,700 RPM to 400 HP at 5,600. The torque is pretty flat starting at 368 at 2,900 to 380 at 5,200 RPM. Max torque was 395ish in the 3,500...
  9. SN65

    SN65 Dyno results

    Yesterday, we had the SN65 out at Finish Line Performance (Naperville, IL) for a dyno session. We made 7 runs, made a few adjustments and ended up with a max rear wheel power of 402.4 and a max rear wheel torque of 396.4. This is an increase of about 40/40 over the original factory numbers...
  10. SN65

    GTE-650 project

    Hi All, I got most of the sketches ready, but I have been distracted by a few other issues at work. Sorry for the delay. I will be posting soon. Bob
  11. SN65

    Hot Rod photo shoot

    Just uploaded some new vids at the website. Be sure to check out burnout #3. Bob
  12. SN65

    Hot Rod photo shoot

    Here are the results of the . lots of new photos are posted at the site Bob
  13. SN65

    GTE-650 project

    Hi Doc, I think you are right. I am going to have to take the bull by the horns work up all the drawings and detail everthing out. I will start with the chassis modifications. I will get started on the drawings ASAP. I should have all the chassis mods detailed by the end of next week...
  14. SN65

    GTE-650 project

    Hi All, Does $4,500 sound like a good price for what I described above??? Bob
  15. SN65

    GTE-650 project

    Hi B, :rlaugh: I am sure that they could. It was just my "international trade" humor raising it's ugly head. I am sure people from Cuba could partisipate. I would just have to ship any materials through Canada first. :D Bob
  16. SN65

    GTE-650 project

    Hi All, I have been going over the first phase of the project. Phase one would include all the chassis structural modifications, the rear suspension mounting modifications and the front K-member fabrication and installation. The chassis modifications will include the...
  17. SN65

    GTE-650 project

    Hi Doc, I have not givin the drivetrain all that much consideration as of yet. I was thinking that we would have to go with the 289/5.0 (just for the "look". The actual internals could be any displacement) with a stick (4,5,6 speed) and a 9" rear, but other than that, I was waiting for the...
  18. SN65

    GTE-650 project

    Thanks a lot Kermit. I really appriciate you spreading the word. Bob
  19. SN65

    GTE-650 project

    Hi 220, I was thinking of either having them all painted exactly the same color. Or... Having all 11 completely different colors. They will all have the same racing stripes, logos, decals, etc, but they will be consecutivly numbered 1 through 11. I was thinking about takeing the 11 with...
  20. SN65

    GTE-650 project

    I got the GTE from the Ferrari "1963 Ferrari 250 GTE 2+2 Series III" Again, all of this is going to be up for review when we assemble a group of 10.
Top Bottom
Back
Forums
Menu