Search results

  1. 9646gt

    Current Before And After Pics Of My Project :)

    So the car is my 95 GT I just bought with 185k on the clock. It was in pretty bad shape appearance wise and had a couple small mechanical issues. I will eventually make a thread of all I have done even tho it is nothing special really. Anyway, I still need to do interior pictures and stuff but...
  2. 9646gt

    320 miles on a full tank

    Isn't it hard on the pump to run that low? I always thought being submerged helped to cool the pump but maybe thats just another internet rumor lol. Great gas mileage you guys are getting. I will have to check mine some time. 2.73 gears suck for the fun factor but are geat on gas mileage lol. I...
  3. 9646gt

    Hoping To Get Back To My Ride Soon!

    Stop talking and start turning wrenches right meow! lol but seriously congrats and get that snake back on the road :)
  4. 9646gt

    $120 For Moog Bj's Or $140 For X2's

    I need to have my moog BJs installed. Tried to have them done while getting all the tie rods replaced but they said they did not have a press. Ugh. How often do we grease the moog joints? Do you need to be carefull not to over grease them? Sorry to hijack but information may be helpful to the OP...
  5. 9646gt

    Electrical Temp Sensor Doesnt Work

    Be VERY careful when you install the temp sending unit. a hair to much torque was all it took to crack my poort stock lower intake with 189k on her. I guess it was pretty brittle. Luckily I had an explorer intake to put on :)
  6. 9646gt

    Best Heads For A 302

    i noticed much better pickup in the mid and high range by swapping on a explorer intake manifold. I HIGHLY suggest adding it with the heads. Could really wake it up and they are cheap cheap cheap.
  7. 9646gt

    Engine Pic - Powdercoating done.

    Looks clean! Wish mine was cleaner but with all the miles on it I would need to pull the motor and clean everything. What is that black pipe and hose coming up behind the middle idler pulley? My 95 does not have that.
  8. 9646gt

    Need Help Freshening Up The Ride On 95 Gt

    I bought some prothane front control arm bushings and moog ball joints and moog inner and outter tie rods and I DREAD installing them. Also bought some H&R SS sptings with MM CC plates. Right now the car has eibach pro kit springs with BOI rear control arms (crappy poly bushings and each end...
  9. 9646gt

    Any Particular Gas Fellas?

    All y current cars seem to run best on Shell. At this altitude the s2000 I had and my Wifes Acura don't even want to start worth a damn with anything but Shell it seems. It is good stuff for sure. When I get the crappy gas on base the car runs crappy and takes longer to start.
  10. 9646gt

    Can't Figure Out One Bolt On Edelbrock Elbow And Explorer Intake

    Well guys I finally got everything together and the RTV is workign like a champ. Car pulls much better than with stock intake and there are no leaks in that area at all. It's a temp thing tho as I need my car on the road. When I get a chnce to pull it back off I will for sure be removing the RTV...
  11. 9646gt

    Probe Seats

    Pics co the seats in the 67 pls :)
  12. 9646gt

    Thinking About Replacing The Stereo Head Unit With An Android Tablet

    loving it :) Would be nice like stated to do a trim bezel. Maybe you could make that removable as well.
  13. 9646gt

    Can't Figure Out One Bolt On Edelbrock Elbow And Explorer Intake

    may have to do like you guys have suggested and drill out the hole n the elbow and thread a carb stud onto the upper intake and then the elbow should slide over and I can put a nut on there. I guess I was jsut to tired to think straight. In the mean time I used some aircraft RTV from work that's...
  14. 9646gt

    Can't Figure Out One Bolt On Edelbrock Elbow And Explorer Intake

    Yup 94-95. It came with studs for the TB but not elbow just bolts. To use a stud I need to drill out the threads on the elbow I guess.
  15. 9646gt

    Can't Figure Out One Bolt On Edelbrock Elbow And Explorer Intake

    Ok so I am getting very upset. The explorer intake needs to go on asap so I can drive my car again. I just got from fedex today my summit 70mm TB and edelbrock sn95 elbow adapter. I have it oriented like in the following pictures. The FORWARD BOTTOM bolt is impossible to figure out. That one...
  16. 9646gt

    gain 100 hp 95 stock conv.

    I would be interested to know what combo hci combo would net mw around 350 rwhp on a stock 302 bottom end :) I am new to the 5.0 as I have always played with modulars and am not sure where to start lol.
  17. 9646gt

    Engine Which Gasket On Explorer Intake?

    My explorer intake has a internalegr in the upper and lower. Which gasket set do I need so It will be blocked off? Some say felpro 1250 but I heard there is a felpro 1250s that is metal core and much better but I don't know which version I would need for my stock port size? It does have egr...
  18. 9646gt

    Urgent Need Lower Intake Manifold!

    Thanks for all your support guys. I had a very helpful mustang guy on ebay overnight me one for 150 shipped. Kinda steep but he shipped in less than 15 minutes of paying. Thanks again very much.
  19. 9646gt

    Urgent Need Lower Intake Manifold!

    What about if I have an explore rintake chilling in the garage? My worry about that however is it has the internal egr provision and I am not sure what you do with that?
  20. 9646gt

    Urgent Need Lower Intake Manifold!

    Sorry :) I know I shouldn't be doing this I'm just desperate lol. I am assuming I can use a fox intake even though it has a air temp sensor in it?
Top Bottom
Back
Forums
Menu