Search results

  1. S

    Hooking up gauges and have ???? ASAP

    A/F gauge? I dont use one
  2. S

    Hooking up gauges and have ???? ASAP

    dude..there is a Home Depot near T&J..you might find em there:)
  3. S

    Hooking up gauges and have ???? ASAP

    LOL:D I did the same thing......bout a month later, I couldn't figure out why my wipers would work....I just jiggled the fuse tap and they worked again. Just make sure that you have the fuse tap secure, or the vibration from the car might jiggle it loose. :)
  4. S

    Hooking up gauges and have ???? ASAP

    If you're at the front of the car looking in at the engine bay, you will notice there are some 1/8" red plastic lines near the injectors and the intake. These are probably wrapped in blaack tubing. You just have to look for them. Any of these red lines will do fine. I just bought a T-fitting...
  5. S

    Car Broke Tongight After Running At the Track!

    I still have the stock one...this is my 3rd one, though. From what I hear, the TO bearings that Centerforce carries are not better than the Ford ones. Like I said, that is just what I have heard....I'll probably end up going with Centerforce or other brand eventually
  6. S

    Hooking up gauges and have ???? ASAP

    same way I did mine...works great:)
  7. S

    Car Broke Tongight After Running At the Track!

    I use the Centerforce Dual Friction too:) TO bearing still squeaks every now and then, though
  8. S

    Cobra Killer Kit

    I have the Novi 2000 kit....my numbers so far are 406rwhp, and 388rwtq:D Best purchase I've made so far:)
  9. S

    Suspension Guru's please answer question

    one more thing too....don't forget that you will need to wait for the car to settle from the new parts:)
  10. S

    Mods I can do in preparation for a supercharger?

    exhaust and suspension
  11. S

    Tire Rack sucks

    I've had nothing but AWESOME service from the TireRack:)
  12. S

    Need help spending my money

    dude...save a few more bucks and go with the Cobra Killer kit at www.modularfordpowerhouse.com I got the Novi 2000 kit. IMO, its the best bang for the buck. you won't ever have to fill nitrous bottles, it's always there if you want to play:D Tim's tune is the best, IMO:) Good luck:)
  13. S

    rotating maf

    I had a MAC CAI before I got the blower. I tried the darkwolf mod. It didn't make a difference IMO.:)
  14. S

    Corbeau CR1's???? anyone who has had em or another Corbeau seat come in..

    I just installed the Corbeau Legacy seats. All black matches my charcoal interior great. The brackets that you can buy from Corbeau will match exactly with the bolt and holes in you car from the old seats. The stock seatbelts can be used with the Corbeau brackets. Direct replacement:)
  15. S

    SLP line lock install?

    use a speed bleeder to help with bleeding the brakes. Do a search and you will find the info:)
  16. S

    How do you change your sparkplugs?

    whoops..I was too late:) oh well...double the info:D
  17. S

    How do you change your sparkplugs?

    you don't have to take off your fuel rails. It helps a bit to remoce the air intake tube leading from the throttle body to the fenderwell area. also, you may need to unhook a few harnesses on the passenger side. Just unscrew each bolt holding the spark plug cap down, carefully pull up on the...
  18. S

    kenne bell prices

    like the other guys said,...go with tim @ www.modularfordpowerhouse.com That's where I got my Novi 2000 kit. Everyone I've talked to is more than happy. Just ask for Tim. Good luck:)
  19. S

    how much for dyno tune

    I have the EFI reflash. It works both for NA and power adder cars. IMO...it's the best. You can find more info @ www.modularfordpowerhouse.com ask for Tim. Good luck:)
  20. S

    ordering vortech in morning did i get a deal ?

    hehe...is it just a coincidence that over 90% of the guys on here vote for the Cobra Killer Kit?:D
Top Bottom
Back
Forums
Menu