Search results

  1. S

    1983 5.0 cam selection.

    Ed Curtis @ http://www.flowtechinduction.com/ FTW!!!!
  2. S

    Another supercharger ?

    It will easily put you in that power range. 320rwhp can probably be done on 6-8psi for your current combo...nothing to major. I would just say search these boards and find some good reviews.
  3. S

    Question about setup.

    Well, i wouldnt be doing that to a 93 as they have crappy pistons. Stangs had forged pistons up until 92 in the 5.0s, although i cant remember what year it started. I think its like 86-88 though. But actually, the E303 is a boost cam....But if you decide to, it will be an EASY 350+ rwhp.
  4. S

    Different Heads Question?!?!?

    Although you should be good to go if they line up good, but make sure you check your piston-to-valve clearance.
  5. S

    2001 oem COBRA mufflers dumps

    Not a good idea. Save your money for what you want. Super quiet.
  6. S

    "phenolic" spacer

    On my 91GT i had a 1" spacer on my Trick Flow Track Heat intake. All it is supposed to do is prevent the upper intake from getting hot from heat transfer from the lower. Mine made a corner of the intake manifold hit the hood liner. It melted to it and left a blank mark. Besides for that, no...
  7. S

    Dyno sheets tommorow but here are my gains!!!

    If you read the top of his "charts", it says gain. It is not the actual hp, just the difference between dyno runs.
  8. S

    What do you make of this?

    Does this guy realize that as a business, he cannot legally remove emission equipment. He cant even legally install an offroad mid pipe on the car, yet alone take off the smog pump.
  9. S

    Vortech Supercharger Pulley

    http://www.reichardracing.com/pulleys.php
  10. S

    Another supercharger ?

    Any of the major brands will all do the same...i.e. Novi, Vortech, Paxton, ATI/Procharger. Comparing the same amount of boost on them all will all yield comparable results.
  11. S

    Any difference between an 84 short block and an 88?

    Dont pistons on 87+ have deeper fly cut pistons? Also, I thought forged pistons started in 87 or 88...?
  12. S

    $4000 budget for engine build

    $2500 for an engine with a cracked block and no accessories? I think I'll pass... But anyways, 327 (no block work = less money) or 331 if you feel more comfortable with it. Stroker kit = $1500ish. AFR 185s = $1300ish. Custom Cam = $350 from FTI. Holley intake = $500. So about $3650...
  13. S

    turbo

    not worth it. you can find quite a few turbos on ebay for $100-$500. That, some universal piping, couplers, intercooler, supporting mods like injectors, pump, etc... and you can build a kit for under $1500.
  14. S

    Battery Cover/Shield Engie Dress Up Suggestions

    There is lots of stuff out there...but why not just grab a piece of sheet metal, fab something up, and paint it blue to match? That would cost like $5 for the metal and another $3 if you didnt have enough paint left over from valvecovers...
  15. S

    to anyone who has a sub or knows about them...

    The gain is not a volume control for amps, but rather a way to set the amp output equal to the receiver output. To adjust correctly, turn the stereo volume 3/4 up...yes it will most likely be loud and neighbors might complain, but oh well. Then starting with the gain all the way down, slowly...
  16. S

    It sees the sun

    Is that Pontiac Burnt Orange paint? If not, its pretty darn close and its a sweet color.
  17. S

    wish my car ripped like this!

    pretty sweet exhaust note....whats it run in the 1/4 off the spray? Low 12s?
  18. S

    If 9500 was too much for the black LX "Show Car"...

    Dammit Fast and Furious...you have even corrupted mustang owners...but that must be why you are selling your stangs ;-) Gonna go buy an Eclipse w/ NAAAAAWZZZZZ and blow your floorboard out :rlaugh:
  19. S

    292hp at the rear wheels?

    If you can drive you can expect at MINIMUM a mid to high 12 sec at 107+...just a guess though...
  20. S

    Thought you boys might like a laugh

    Oh man...but no one has seen a fox as bad as i have. I was back home for emergency leave a couple weeks ago and we (me and wife) are going through Gary, IN in the wrx. This dude is next to us in a fox body with a huge WIDEBODY kit, and i mean HUGE. It wasnt even blended together all that well...
Top Bottom
Back
Forums
Menu