Search results

  1. moneypit94

    Just had alternator rebuilt, what voltage should it be putting out at idle?

    My alternator had a bad diode in so I had it rebuilt. Now the voltage is consistant but at idle its putting out 13.71 volts at the battery. I thought it should be at about 14.2. Watching the little dumby guage it doesn't move now at all with different rpms so thats good but i still feel its...
  2. moneypit94

    ignition module 6 or 9 pin?

    How is that? and if so is that adventageous or not cause i do have a digital 6. Im looking at the dyna mod or the accel one now.
  3. moneypit94

    ignition module 6 or 9 pin?

    I am having some issues that i think might be caused from my ignition module. Im going to see if i can get mine tested first. I know i have a 6 pin one but when i was looking for replacements i noticed that they also list a 9 pin ignition module for a 94 mustang 302. So I guess my real...
  4. moneypit94

    About time to hit the dyno again

    I originally built it up for the true/wild street competitions. Have to have a street legal car that can handle 30 mile trip and 3 runs directly afterwards. Keeps the all out drag cars out. I would like to hit one of those competitions up but now i just want to drive it around on the weekends...
  5. moneypit94

    Inconsistant dyno results. confused

    Just ordered a boost controller. And on my way up to my dyno appointment, (next wednesday) Im gonna pick up 15 gallons of E-85. So first thing is a quick gas pump tune. Probably up the boost if i need to hit 700 and then Im put in the e-85 and gonna runup the boost to about 900 rwhp and if it...
  6. moneypit94

    Inconsistant dyno results. confused

    Just threw a different ECU into the car and HOLY cow it idles and runs and if you lean it out slightly it doesn't backfire. It will start each time and idle and it comes to stops signs and doesn't quit. I AM IN A GREAT MOOD! 50 dollar used ECU off ebay and the car is actually streetable! I...
  7. moneypit94

    Will a Auto ecu work on a Manual car thats been converted to auto?

    I just put the computer in today and holy cow im in a good mood. My car started right up and found idle. I was actually comfortable enough to take it for a drive and the A/F stayed a wee bit rich but not bad the whole time. This was without me really playing around with my PMS at all and the...
  8. moneypit94

    Will a Auto ecu work on a Manual car thats been converted to auto?

    Cool! I just ordered a U4PO i found on ebay.. Cost me a little over 50 bucks. So hopefully its just that easy. Plug my PMS into and if its still really random I will have eliminanted one more possible problem.
  9. moneypit94

    Time differences between gear sets: 3.55 vs 3.73

    As far as running out of RPMS at the end of the track you shouldn't worry about it. I was talking to the guys at AFM about that awhile back and i remember them talking about how in moderation that they have gotten their costomers considerably faster with bigger gears and the customers said they...
  10. moneypit94

    Will a Auto ecu work on a Manual car thats been converted to auto?

    Not sure what you mean "reflashed"? I just want to throw a different ECU/PCM/ECM/computer, or any other name for it, in my car to make sure that my computer isn't the problem with my random tuning issues. If it doesn't help I sell it back on ebay. So which ones will work?
  11. moneypit94

    Inconsistant dyno results. confused

    I personally made them check that. Which was interesting actually. The better runs it made less mph per rpm, but the slopes were identical, just shifted down. But now that I say that It makes me wonder why they would change unless the tranny is doing some weird stuff too. But this doesn't...
  12. moneypit94

    Intake height questions

    I can check tomorrow on the intake and elbow height. There is a company that will make u a custom intake elbow to clear pretty much anything.. intakeelbows.com looks like they have some that I remember seeing. They are $225 i think though.
  13. moneypit94

    Inconsistant dyno results. confused

    I do have my own wideband guage and it was fairly close to theirs, even though mine was reading out of the other exhaust pipe. And AFM tunes with the Interact software. They do the runs and datalog them and go through and add and subtract fuel as needed. Far as timing goes they never really...
  14. moneypit94

    Will a Auto ecu work on a Manual car thats been converted to auto?

    I had a manual transmission and i put a powerglide in. So its a manual shift auto. So if yours was a manual and you put an auto in it with an auto computer then I should be good i would think. Not sure as far as comparing the two intakes. I have the cobra RR hood so im not sure about fitting...
  15. moneypit94

    Will a Auto ecu work on a Manual car thats been converted to auto?

    Having issues with tuning my car so I have been thinking about trying another ECU just to see if it helps. Looked on ebay and i can get an auto ECU for a lot cheaper and theres more of them. Are they interchangeable and what would be different about them?
  16. moneypit94

    Inconsistant dyno results. confused

    Yeah, I have thought about something other then the PMS. But sence i take it to AFM and that is their piggy back system I thought of all people they could get it to work, and they say it will work. Don't know if i trust anybody else around with my type of setup either.
  17. moneypit94

    Inconsistant dyno results. confused

    Car went back to AFM on the dyno today. And it was a fight from the beggining. Everything was backwards. The richer it ran the more it liked it. And when you tryed leaning things out it would run like crap with less power. It's as if the computer changes up things randomly too. I get the...
  18. moneypit94

    About time to hit the dyno again

    Yes, Its got an 8 pt roll cage i believe. Its been so long ago i don't remember exactly what i put in it. Car has pretty much been in storage for the last 3 years and with my new job i finally have some spending money again to work on it. Tomorrow is the appointment and im not really into...
  19. moneypit94

    Post Pics Of Yourself

    gotta love something that runs in the 10's from the factory. I am thinking of getting a liter bike eventually. If the Hayabusa wasn't so ugly to me i would go with a 9 sec bike.. lol
  20. moneypit94

    About time to hit the dyno again

    Yeah its the in progress build in my sig. Those numbers are off of 15 psi. And im ok with the numbers for now. Considerring its 91 octain and only 15 psi and we don't have it fully tuned (no real timing was added before the issues arrose) im really happy. This next time at the dyno will to be to...
Top Bottom
Back
Forums
Menu