Search results

  1. stirling33

    Fuel problem

    Well it looks like I have to take off the timing chain cover and take a look, because when putting in the fuel pump it just slides right in.....
  2. stirling33

    Fuel problem

    Cleared out the line with a compressor and nothing unusual came out and seemed to be pretty clean. Gas also flow very easily out of the tank when I disconnected the fuel line. If the eccentric is off or broke would you still be able to slide the fuel pump arm freely?
  3. stirling33

    Fuel problem

    Thanks for the input and I did try that and I got no gas out of the out line, so at least I have narrowed it down to the fuel pump and the tank My guess is because the fuel pump is brand new the problem is a clogged fuel line or tank. This will be my after work project. Does anybody have...
  4. stirling33

    Fuel problem

    The fuel filter is brand new, and when you pull back the linkage you can hear a noise being produced but no gas is being sprayed into the carb. If that makes any sense.
  5. stirling33

    Fuel problem

    My car recently just sputtered and died while driving, after checking the obvious gas gauge and any lose connections, we diagnosed the problem as a bad fuel pump. Just put in the new fuel pump and still nothing, it will actually start and run for a couple of seconds but is running off of...
  6. stirling33

    Performance??

    Thanks 302Coupe, so would I have been better off sticking with my old cam which was Duration 270/ 280, Lift .448/ .472.....so is there anything to do to overcome this without putting in a different cam? Oh by the way I have a 4-spd top loader trans.
  7. stirling33

    Performance??

    I apologize in advance for the long winded thread but I need some help, I recently installed a set of GT40 Aluminum Y303 heads and a Ford racing cam -Duration 290/ 300, Lift .472/ .496. The rest of my set up is as follows : stock block from a 88', RPM intake, Holley 600 carb,Hooker headers...
  8. stirling33

    Family Guy

    Thanks for the reply, I will give the bath towel trick a try.
  9. stirling33

    Family Guy

    Here's a question for all you family guy's - I have a 67' Fastback and my question is have any of you found a certain brand of child seat that works best, or if any work at all. Thanks and any info would be appreciated.
  10. stirling33

    X-Pipe

    Thanks guys for all the input, very helpfull info.
  11. stirling33

    X-Pipe

    Just a quick question for everyone - What if any are the benefits of installing a X-pipe to your exhaust system?
  12. stirling33

    Cylinder Head issue

    Thanks for your response, the Heli coil was the route I was thinking of, what about using a self tapping bolt? Would that be an option or is the Heli coil your best bet.
  13. stirling33

    Cylinder Head issue

    This I am sad to say is my first post and I would have liked it to be a better situation but I need some suggestions with a problem - I am installing a pair of Aluminum GT 40 heads and the installation was going flawless until while putting the headers back on one of the threads stripped...
View older results
Top Bottom
Back
Forums
Menu