Search results

  1. Dan02gt

    Fuel Car running worse after gas fillup

    Like others have said, you need to verify your MAF calibration and injector setup. For an aluminum headed H/C/I setup like you have 24lbs injectors should be bare minimum with 30s being a better option. The 155 lph fuel pump will be fine.
  2. Dan02gt

    Opinions on this tire setup

    I didn't change anything to get them to fit. Car is setting on Steeda Sport springs. The front does rub a tiny bit on a full lock turn.
  3. Dan02gt

    Opinions on this tire setup

    I have this same setup on 17" Pony Wheels and couldn't be happier with the way it looks and fits.
  4. Dan02gt

    New Record sale price for a Fox Mustang?

    Yes there is a picture of the window sticker in the auction listing.
  5. Dan02gt

    New Record sale price for a Fox Mustang?

    As crazy as I find it that someone paid 226k for it at auction, I find it equally crazy that someone paid 48k for it in ‘93. A loaded GT was what 15-16k at that time?
  6. Dan02gt

    5,200 rpm stop making power on dyno

    What's your A/F ratio doing when the power starts dropping off? In my experience valve float is very noticeable as the engine acts like it has a bad miss.
  7. Dan02gt

    Heads

    That's a big cam for your setup and will make your car a dog. It's also going to need good valve springs to handle the .570" lift on the exhaust side. My recommendation is to sell it. Unless you can find a freshly done set of GT40p heads I wouldn't bother with them either. They are 20 years...
  8. Dan02gt

    Wheels-Tires Who’s Running a 275 tire and still using a quad shock?

    I have 275's on 9" wide 17" ponies and they fit fine without doing anything to the quad shock, but I have the factory quad shocks and they look smaller than the ones you have.
  9. Dan02gt

    Drivetrain Searching for a clutch

    I have a Ram HDX it’s considered a step up from a factory clutch so it still has light pedal pressure but is rated for 400 hp.
  10. Dan02gt

    Fox Fan Clutch

    I have the Flex-A-lite standard duty fan clutch and that’s how mine is. Soon as I pull out my neighborhood it quiets down.
  11. Dan02gt

    Electrical TFI question 90 foxbody

    I don’t know what TFI you got but pretty much anything other than Motorcraft is junk.
  12. Dan02gt

    Drivetrain TKX Tremex 5-Speed Gear Ratio

    I would go with the 17765 unless you plan on running stock 3.08 or 2.73 gears. The 17765 with a 3.73 rear gear would be perfect for a street car.
  13. Dan02gt

    92 LX uneven front ride height.

    This type of stuff is normal for foxes. I was able to get mine fairly level by installing Caster/Camber plates to allow better articulation at the strut mount and adjustable rear lower control arms. The difference in adjustment is probably 1/2" on the rear spring perches to get it within 1/4"...
  14. Dan02gt

    double din without the screw holes is now a thing.

    I ordered one. Not sure I'll install it or not. We'll see how I feel when it comes in.
  15. Dan02gt

    I dont know where waldo is

    The other question is what heads are on it. A HO would have E7 heads while most of the others had the E6 heads.
  16. Dan02gt

    I dont know where waldo is

    I’m going with Crown Vic too. If it’s running a A9L it must have the HO firing order or have been converted to the HO firing order. It looks to me like it would be possible to just flip the intake to the proper Mustang orientation instead of re-inventing the wheel to make that configuration work.
  17. Dan02gt

    Fox This :poo: just got real.

    Don't put the Comp Stage 4 cam on that combo. The stage 2 will work much better for those parts especially if you're not getting a tune. What's the max lift those RHS heads can handle?
  18. Dan02gt

    Engine LOOSE ROCKER ARMS!!HELP!

    I dropped a extension with a 1/4” socket down in one while priming the oil pump years ago (hence why I tape it together now). I got it out by dropping the oil pan down on the cross member. There was enough room between the engine and pan that I was able to fish it out.
  19. Dan02gt

    Engine LOOSE ROCKER ARMS!!HELP!

    Run it until you see oil coming out of all the push rods and lubing the rockers.
  20. Dan02gt

    Engine LOOSE ROCKER ARMS!!HELP!

    Yes you use a drill with an extension and 1/4" socket to turn the oil pump by inserting it in the distributor hole. You'll have to remove the distributor if you haven't already of course. Also make sure you tape everything together really good so it doesn't come apart and fall down in your engine.
Top Bottom
Back
Forums
Menu