Search results

  1. lancec2c30

    Whats everyones opinion on high dollar Spark Plug wires? They worth it?

    You might justify it if you're running a forced induction setup, and having problems with spark blow-out. But I would think that a set of Ford Racing wires or the likes would be more then enough.
  2. lancec2c30

    question about 2001 gt rear disc brakes on my 87

    .
  3. lancec2c30

    question about 2001 gt rear disc brakes on my 87

    For the fronts, you should be able to use the 01 brake hoses, with a adapter (sold at maximum motorsports) on the passenger side. I've seen a hydro-boost setup on a few foxs, but I think it's a lot of work. You'd probably be money ahead to find a 94-95 master cylinder/ booster combo. You'll...
  4. lancec2c30

    Another Turbo Fox Build Thread

    Mocked up the turbo header, turbo, and downpipe so I could figure out a location to mount my wideband bung. But the sensor won't reach, so I need to put it in the Y-pipe. Mocking that up is gonna be a PITA so it'll have to wait.
  5. lancec2c30

    Painted supercharger, anyone? pics?

    Guys powdercoat and paint their roots blowers on Terminators all the time. Whipple wrinkle finishes most all of theirs from the factory.
  6. lancec2c30

    Another Turbo Fox Build Thread

    Hey John, here's my directions quoted from the word doc, and a few of the install pictures he sent. From the pictures, and skimming through the directions it looks like it goes down off the turbo.
  7. lancec2c30

    Part 2 of my build

    What size downpipe came on the quicktime kits?
  8. lancec2c30

    Part 2 of my build

    3 1/2" downpipes just don't work on these cars. I know B&G kits come with a 3.5 and you've gotta beat the firewall in in a few places to get it to clear.
  9. lancec2c30

    Another Turbo Fox Build Thread

    Kit came in today. I've no complaints so far, as far as a first look over goes, other than some of the fins on the intercooler being tweaked from packaging. Cold side. Hot side. Y-pipe and turbo. I didn't get pictures of all the couplers, v-bands, etc yet. And Chad's still waiting on...
  10. lancec2c30

    Part 2 of my build

    So, you have 90 deg. boots on your ford racing wires? Have you put any of them on to see how they fit with the turbo headers? I need to buy a set of plug wires, but I don't want to get something that won't fit well. B&G has a horrible issue with burning up plug wires, but I haven't heard...
  11. lancec2c30

    Project: Suspension ****!

    Perfect, I'll put it in the calendar. Maybe my pile will be worthy of a pull by then. Lol.
  12. lancec2c30

    Project: Suspension ****!

    Yeah, Chehalis. We'll have to figure something out. Maybe we can go watch john make big numbers with his setup when he goes to tune it. :shrug:
  13. lancec2c30

    Project: Suspension ****!

    I know, I haven't done anything as far as cruises/meets. I'm sure by the time the car is running the weather will be ****.
  14. lancec2c30

    Project: Suspension ****!

    Yeah, you're doing it the right way. I can forsee a future of "forced upgrades" on my car. Lol.
  15. lancec2c30

    Project: Suspension ****!

    I'm jealous. My car is probably going to be a hazard with it being as low as it is on stock C/C plates and 4 cyl. springs. Lmao.
  16. lancec2c30

    Part 2 of my build

    I'll have to look on the corral again, but I think chad said something about the turbo having oil drain issues if you clock it too far.
  17. lancec2c30

    Another Turbo Fox Build Thread

    Does your coupler not fit because of the 90mm TB you have? I knew the kit didn't come with intercooler mounting hardware. I'll just have to see how mine turns out, I don't know how much different the 351 kit is, but it hasn't been in production for very long, so maybe there is still some...
  18. lancec2c30

    Another Turbo Fox Build Thread

    I went with the blue gauge on mine. I've picked up a set of Delphi 42lb injectors off The Corral. Mass air is a PMAS blow through setup. I'm running stock intake mani. and for the turbo I plan to copy this setup. I'm going to run a y-pipe from the down pipe to my spintech cat-back, with a...
  19. lancec2c30

    Another Turbo Fox Build Thread

    This was sitting at the doorstep when I got home today. I just hope my install goes a little better than cobra912's. :p
  20. lancec2c30

    Another Turbo Fox Build Thread

    It definitely adds up quick, I still need a new set of plug wires, maybe a msd coil, and figure out tuning. Mike, you'd kill for my dads garage. Haha. He's just nice enough to let me fill it up with my crap for a month at a time. :) And only update for today was getting my ignition box...
Top Bottom
Back
Forums
Menu